VEVOR logoSHELF TRACK
MODEL: DCLZ01
Instruction Manual
VEVOR DCLZ01 Shelf Track

DCLZ01 Shelf Track

1 Model DCLZ01
2 Packing Quantity 10 PCS
3 Colour Bright Silver
4 Length of guide 990 mm

Accessories

VEVOR DCLZ01 Shelf Track - Screw VEVOR DCLZ01 Shelf Track - Expansion sleeve VEVOR DCLZ01 Shelf Track - Aircraft expansion
Screw (x 40) Expansion sleeve (x40) Aircraft expansion sleeve (x40)

This is the original instruction; please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us for not informing you again if there are any technology or software updates on our product.

Thank you very much for choosing this product. Shelf track is an installation accessory. Please select the appropriate shelf support to work with it before installation.
Please read all of the instructions before using it. The information will help you achieve the best possible results.

Product Structure

Dimension Figure Fit shelf support
VEVOR DCLZ01 Shelf Track - Dimension Figure VEVOR DCLZ01 Shelf Track - Fit shelf support

Installation introduction

(Note: This product only includes shelf track; other accessories are to be provided by the customer.)

  1. Use guide rail positioning to punch holes in the wall.VEVOR DCLZ01 Shelf Track - punch holes in the wall
  2. Fasten the guide rail to the wall with screws.
    (1) If the wall is a board, screw directly into the board.
    (2) If the wall is a brick wall, first knock the expansion sleeve into the wall hole, and then tighten the screw to the expansion sleeve
    (3) If the wall is drywall, first screw the aircraft expansion sleeve into the drywall, and then install the screw to the aircraft expansion sleeve.VEVOR DCLZ01 Shelf Track - rail to the wall withscrews
  3. Repeat steps 1 and 2 to install the remaining shelf track and shelf support.
    (Note: All shelf tracks must be of the same height)
  4. Install shelf support in an appropriate position as required.
  5. Finally, place the board on the shelf support.VEVOR DCLZ01 Shelf Track - remaining shelf track

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
EC REP: E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main.
UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Technical Support and E-Warranty Certificate
www.vevor.com/supportVEVOR logo

Documents / Resources

VEVOR DCLZ01 Shelf Track [pdf] Instruction Manual
DCLZ01, DCLZ01 Shelf Track, DCLZ01, Shelf Track, Track
VEVOR DCLZ01 Shelf Track [pdf] Instruction Manual
DCLZ01, DCLZ01 Shelf Track, Shelf Track, Track

References

Leave a comment

Your email address will not be published. Required fields are marked *