DVM99 – erratum
DVM99 3-In-1 IR Thermometer with Thermistor Probe and Clamp
Erratum to manual of DVM99 dated 04/05/2012 and before. Section 6 Operation. The table in this section should be as follows:
| MIN | The MIN function is not supported. |
| MAX | The MAX function is not supported. |
| LOCK | Press the IRT button [D] to enable LOCK-mode (continuous measurement). Press the hold button [E] to exit LOCKmode. |
| °C/°F | When °C indication is flashing, press the IRT button [D] to switch to °F mode and vice versa. |
| ε | Press the up  [E] and down  [D] buttons to set the emissivity (see §7). |
V. 01 12/03/2013
©Velleman nv
Documents / Resources
 |
velleman DVM99 3-In-1 IR Thermometer with Thermistor Probe and Clamp [pdf] User Manual DVM99, 3-In-1 IR Thermometer with Thermistor Probe and Clamp |
