VEDINDUST SW621 HDMI Displayport KVM Switch
USER MANUAL
Dual Monitor KVM Switch 2×2 8K60Hz USB-C
Safety and Notice
Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
- Follow all instructions and warnings marked on this unit.
- Do not attempt to service this unit yourself, except where explained in this manual.
- Provide proper ventilation and air circulation and do not use near water.
- Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
- Use only the power adapter and power cords and connection cables designed for this unit.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Features
- Using only 1 set of keyboard, mouse to control 2 computer devices and 2 monitor.
- Available to use keyboard and mouse without any delay after switch input sources.
- Through two USB 2.0 hub ports, the mouse and keyboard can be connected to the KVM. Through two USB 3.0 hub ports, barcode scanners, USB hard drives, or other high-speed USB devices can be connected to the KVM.
- Support resolution up to 7680*4320@60Hz.
- Support USB 3.0 transmission rate up to 5Gbps.
- Support front panel buttons and External switch button to control KVM to switch inputs.
- Support Windows/Vista/XP and Mac OS, Linux and Unix ,Plug and Play.
Specifications
- Support Resolution: .7680*4320@60Hz
- Video bandwidth :up to 48Gbps
- USB transfer rate :up to 5Gbps
- Input cable distance:≤3m@8K/60Hz,≤5m@4K/60Hz
- Output cable distance:≤3m@8K/60Hz,≤5m@4K/60Hz
- Power consumption : 1W
- Input voltages :DC/12V
- Operating Temperature range:(-5 to +45 C)
- Operating Humidity range :5 to 90%RH (No Condensation)
- Storage Temperature:-20°C – 60°C / -4°F ~ 140°F
- Dimension (L x W x H):141X68X38 (mm)
- Net Weight: 270g
Package Contents
- KVM Switcher
- DC12V power adapter
- USB3.0 to Type-c Cable
- External controller kits
- User manual 1pcs 1pcs 2pcs 1pcs 1pcs
Connection Diagram (Front Panel)
Notes
- USB2.0 Ports: Connect devices such as mouse, keyboard, etc.
- USB3.0 Ports: Connect devices such as high-speed USB devices, etc.
- Switch button: PC1 and PC2 input select.
- External control: Connect external control switch.
Connection Diagram (HDMI KVM Switch)
Notes
- PC1 IN: USB-C and HDMI1/HDMI2 cables, device connected to computer 1.
- PC2 IN: USB-C and HDMI1/HDMI2 cables, device connected to computer 2.
- HDMI OUT: HDMI OUT 1 and OUT 2, connected to 2 HDMI display devices.
Connection Diagram (HDMI&DP KVM Switch)
Notes
- PC1 IN: USB-C and DP/HDMI cables, device connected to computer 1.
- PC2 IN: USB-C and DP/HDMI cables, device connected to computer 2.
- DP&HDMI OUT: HDMI OUT and DP OUT, connected to DP and HDMI display.
Connection Diagram (DP KVM Switch)
Notes
- PC1 IN: USB-C and DP1/DP2 cables, device connected to computer 1.
- PC2 IN: USB-C and DP1/DP2 cables, device connected to computer 2.
- DP OUT: OUT1 and OUT2, connected to 2 DP display devices.
Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common troubles shooting way shows below
No. | Trouble Description | Causes and solutions |
1 | Non Power Connected |
|
2 | Display has no image |
|
3 | USB not working |
|
Documents / Resources
![]() |
VEDINDUST SW621 HDMI Displayport KVM Switch [pdf] User Manual SW621, SW621 HDMI Displayport KVM Switch, HDMI Displayport KVM Switch, Displayport KVM Switch, KVM Switch, SW622, SW623 |