V830L True RMS Digital Multimeter
“
Product Information
Specifications
- DC Voltage Range: Basic Accuracy
- AC Voltage Range: Basic Accuracy
- DC Current Range: Basic Accuracy
- Resistance Range: Basic Accuracy
- Input Impedance
- Frequency Response
- Other Functions: Continuity Test, Diode Test, Back-Light, Data
Hold, Torch, NCV & Tr. (hFE) Test - Power Source: 2 Pcs., 1.5 V (AAA) Batteries
- Accessories Supplied: Test Leads, User Manual & Battery
(Installed / Kept Aside), Holster (Installed) - Dimension & Weight: 140 x 72 x 37 mm & Approx. 200 gms.
(Including Battery)
Product Usage Instructions
Powering On the Digital Multimeter
Insert the 2 AAA batteries provided into the designated
compartment.
Taking Measurements
1. Select the desired function using the rotary dial.
2. Connect the test leads to the appropriate input terminals
based on the type of measurement.
3. Ensure proper contact and read the measurement displayed on
the screen.
Frequently Asked Questions (FAQ)
Q: How do I perform a continuity test using the
multimeter?
A: To perform a continuity test, set the multimeter to the
continuity function, connect the test leads to the circuit or
component being tested, and listen for a continuous beep indicating
continuity.
Q: What is the purpose of the torch function on this
multimeter?
A: The torch function provides a built-in light source to
illuminate dark areas when working in low-light conditions.
Q: How do I use the data hold feature?
A: When you want to freeze and read a measurement value, press
the “Data Hold” button to capture and display the reading.
Q: What does NCV & Tr. (hFE) test stand for?
A: NCV stands for Non-Contact Voltage test, used to detect the
presence of voltage without direct contact. Tr. (hFE) test is used
to measure transistor gain.
“`
Digital Multimeter – V 830 L+
www.var-tech.com
Features
· 3 1/2 Digits (2000 Counts) · Manual Ranging · True RMS · Built-In Stand & Holster · Continuity test, Diode test · Data hold, Torch, NCV & Tr. (hFE) Test · With Backlight · Superior Quality & Reliable Instrument · 20 µA & 200 M Ranges
v
DC Voltage AC Voltage DC Current Resistance
Range Basic Accuracy Input impedance Range Basic Accuracy Freq. Response Range Basic Accuracy Range Basic Accuracy
Other Functions / Facilities
Power Source Accessories Supplied Dimension & Weight
S P E C I F I C A T I O N S
200 mV, 2 V, 20 V, 200 V, 600 V ± (0.5 % reading + 5 digits) 10 M (200 mV Range – > 40 M ) 200 V, 600 V ± (1 % rdg + 6 digits) 40 ~ 400 Hz 20 µA, 2 mA, 200 mA, 10 A ± (1 % rdg + 5 digits) 200 , 2 K , 20 K , 2 M , 200 M ± (0.8% rdg + 5 digits)
Continuity Test, Diode Test, Back-Light, Data Hold, Torch, NCV & Tr. (hFE) Test. Double Fuse Protection (200 mA & 10A).
2 Pcs., 1.5 V (AAA) Batteries Test Leads, User Manual & Battery (Installed / Kept Aside). Holster (Installed). 140 x 72 x 37 mm & Approx. 200 gms. (Including Battery)
* All Specifications & appearances are subject to change without prior notice
Documents / Resources
 |
VAR TECH V830L True RMS Digital Multimeter [pdf] Instructions V830L True RMS Digital Multimeter, V830L, True RMS Digital Multimeter, Digital Multimeter, Multimeter |