VP05 Dash Camera Hardwire Kit
Specifications:
- Name: Dash Cam Hardwire Kit VP05
- Connector Input Voltage: 12.4V – 24.4V
- Output Voltage: 12.0V – 11.6V
- Output Current: DC 5V 2500mA
- Working Temperature: Not specified
- Cable Length: Not specified
- Low Voltage Protection: Yes
Product Usage Instructions:
1. Product View:
Refer to the diagram for the components and their functions:
A. Red Wire to Fuse Box
Connect the red wire to the fuse box.
B. Black Wire to the Ground
Connect the black wire to the ground.
C. Yellow Wire to ACC
Connect the yellow wire to the ACC.
D. Four Types of Fuses Adapters
Includes ATO, Mini, ACN, Micro2 fuses adapters (2 sets).
E. Type C USB Dash Cam Hardwire Kit
Use the Type C USB dash cam hardwire kit for power
connection.
F. Hardwire Kit Switch
Utilize the hardwire kit switch for regulating protection
voltage.
2. Installation Steps:
- Test the fuse panel to locate ACC fuse and a 12V-30V rated
power fuse. - Crimp the red and yellow wires onto the Add-A-Fuse.
- Insert the red wire into the 12V-30V rated power fuse
slot.
3. Voltage Protection:
Adjust the switch button to set the protection voltage. The
system will cut off power supply if car battery voltage reaches the
set protection level.
Frequently Asked Questions (FAQ):
Q: How do I know if the low voltage protection is
activated?
A: The display screen will show the set protection voltage
followed by car battery voltage when activated. It will cut off
power after five minutes if necessary.
Q: Can I use this hardwire kit in a 24V vehicle?
A: Yes, the hardwire kit is compatible with both 12V and 24V
vehicles. Adjust the switch for proper voltage regulation.
NN9NN H
Dash Cam Hardwire Kit User Guide (VP05)
Hey, find us here:
www.vantrue.net/contact
facebook.com/vantrue.live
V8
1. Product View
A E
B C
F
D
A. Red Wire to Fuse Box
B. Black Wire to the Ground
D.Four Types of Fuses Adapters (ATO, Mini, ACN, Micro2)(2 sets)
E. Type C USB Dash Cam Hardwire Kit
C.Yellow Wire to ACC F. Hardwire Kit Switch
– 1 –
2. Specifications
Name Connector Input Voltage Output Voltage Output Current Working Temperature Cable Length Low Voltage Protection
Description Type C USB DC 12V-24V 5V 2.5A -22°F to 167°F 3.5m 12V vehicle: 12.4V/12V/11.6V 24V vehicle: 24.4V/24V/23.6V
Switch Button Instruction
12V vehicle: With hardwire kit switch turned from left to right, protection voltage will be regulated from 12.4V12V11.6V.
Model NO.: VP05
Hardwire Kit
12.4V 24.4V
12.0V 11.6V Output: DC 5V 2500mA
24.0V 23.6V
Made in China
Model NO.: VP05
Hardwire Kit
12.4V 24.4V
12.0V 11.6V Output: DC 5V 2500mA
24.0V 23.6V
Made in China
Model NO.: VP05
Hardwire Kit
12.4V 24.4V
12.0V 11.6V Output: DC 5V 2500mA
24.0V 23.6V
Made in China
c12V vehicle voltage protection regulation)
– 2 –
24V vehicle: With hardwire kit switch turned from left to right, protection voltage will be regulated from 24.4V24V23.6V.
Model NO.: VP05
Hardwire Kit
12.4V 24.4V
12.0V 11.6V Output: DC 5V 2500mA
24.0V 23.6V
Made in China
Model NO.: VP05
Hardwire Kit
12.4V 24.4V
12.0V 11.6V Output: DC 5V 2500mA
24.0V 23.6V
Made in China
Model NO.: VP05
Hardwire Kit
12.4V 24.4V
12.0V 11.6V Output: DC 5V 2500mA
24.0V 23.6V
Made in China
c24V vehicle voltage protection regulation)
Every time adjusting the voltage switch button, the display screen will first display the present set protection voltage, followed by the present voltage of the car battery in 2 seconds. When the voltage of car battery reaches the present set protection voltage, it will automatically cut off in five minutes and stop power supply for the dash cam.
Notice: The error of displaying voltage is ± 0.2V, which will not affect the voltage protection function of Hardwire Kit.
– 3 –
3. Installation Please read this manual before installation. When installation and wiring, please turn off the car and unplug the key to avoid the short circuit during operation. Step 1, Find the correct fuse slot for your hardwire kit: (1) 12V-30V rated power fuse (2) ACC fuse The location and layout of the car fuse box and the type of fuse used may vary from vehicle to vehicle. Please refer to your vehicle manual and consult the original vehicle manufacturer or professional auto parts installer for details. We recommend that you ask professional help to install to avoid installation errors. The diagram of the simplified fuse box as below:
– 4 –
NO. Amp. 1 7.5A 2 15A 3 10A 4 7.5A 5 15A 6 20A 7– 8– 9 7.5A 10 7.5A 11 10A 12 10A 13 10A 14 7.5A 15 7.5A 16 10A 17 10A 18 20A 19 15A 20 — 21 20A 22 — 23 — 24 — 25 20A 26 20A 27 20A
Circuits Protected Power Window Fuel Pump Alternator ABS/VSA Unit Injection Front Fog Lights Not Used Not Used ODS METER SRS Right Headlight High Beam Left Headlight High Beam Small Light (Interior) Small Light (Exterior) Right Headlight Low Beam Left Headlight Low Beam Headlight High Beam Main Small Lights (Main) Not Used Headlight Low Beam Main Not Used Not Used Not Used Door Lock Driver’s Power Window HAC Option
– 5 –
28 — 29 15A 30 20A 31 — 32 20A 33 20A 34 — 35 7.5A 36 10A 37 7.5A 38 30A
Not Used ACC Front Passenger’s Power Window Not Used Rear Right Power Window Rear Left Power Window Not Used ACC Radio HAC Daytime Running Light Front Wiper
According to the instruction of the fuse box, test the fuse panel to find the location of ACC fuse and 12V-30V rated power fuse with a circuit tester or multimeter. Then remove the original fuse and insert it into the fuse box.
– 6 –
Step 2, Connect to car fuse box
(1) Crimp the red wire, yellow wire onto the Add-A-Fuse.
(2) Please identify the rated power fuse on the fuse panel, such as the fuses for appliances and reading lights. The power rated fuse will remain energized when the ignition is off. Once identified, insert the red wire to the 12V-30V rated power fuse.
– 7 –
(3) Insert the yellow wire into the Add-A-Fuse ACC fuse. Note: The location and layout of the car fuse box and the type of fuse used may vary from vehicle to vehicle. Please refer to your vehicle manual for details.
(4) Fix the black wire(GND)under a metal bolt or screw in your vehicle.
– 8 –
Step 3, Test your installation according to below steps
(1) Insert the TYPE-C end into the dash cam, start the ignition, waiting for the dash cam to start. Note: If the dash cam doesn’t turn on after startup, please check whether the cable is well connected. Then you can contact VANTRUE service staff for help.
(2) After the dash cam starts, turn off the car and unplug the key to check if the dash cam is turned off or goes into parking mode. Note: Some vehicles require turning off the engine and opening the driver’s door to trigger the ACC power off signal, and a few vehicles only trigger the ACC power off signal after a period of time after turning off and locking the vehicle. These two types of vehicle require checking whether the dash cam is turned off or enters parking mode after the ACC power is turned off.
– 9 –
(3) After confirming that the dash cam is off or in the parking mode, restart the car to check whether the dash cam can start recording normally. If all the above steps pass the test, it indicates that the normal circuit and ACC signal test passed
Step 4, Route the power cable (1) Route Hardwire Kit Type C USB cable
Carefully route the power cable along A-pillar and the windscreen and tuck it under the trim.
(2) Route fuse box wires Tie up the wires and put them in the fuse box. Please note that Hardwire Kit switch button should be put in which is easily adjustable, not in the fuse box.
– 10 –
4. Caution Before using the product, please read all precaution and operation instruction to ensure use it correctly and safely. · Some cars are unable to obtain ACC signal changes during ignition and shutdown, and these cars cannot transmit ACC signals to the dash cam during parking monitoring, which may result in some functions not being able to work properly. · Before installation, please check the product labels to differentiate red wire, black ground wire and yellow ACC wire. · Connecting the wrong wire, reverse wiring, or missing wires can result in abnormal product functionality.
– 11 –
Red Signal Wire to Wire Type Fuse
Box
Yellow Wire to ACC
Black Wire to the Ground
Result
Red B+ ACC Ground
Red B+ ACC Ground
Red B+ ACC Ground
Red B+ ACC Ground
Red B+ ACC Ground
– 9 –
Driving mode: normal Parking mode: normal
Driving mode: normal Please wait five minutes to enter
Driving mode: normal Parking mode: failed
Unable to power on
Unable to power on
· Please stay away from high temperature and humid environment to avoid product function abnormal caused by abnormal environment when using the product.
– 12 –
· Once product damage and functional fail is found, please do not continue to use the product to avoid causing damage to vehicle power supply, vehicle battery and dash camera.
· Please use the product within the scope permitted by the law.
5. Warranty & Support
The Vantrue dash cam hardwire kit comes with a full 12 months warranty. If you have any questions regarding your product, please do not hesitate to contact the customer service staff of your purchase channel, or contact us at support@vantrue. net. Queries are typically answered within 12-24 hours.
VANTRUE is firmly committed to keep improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions. Connect with us today at support@vantrue.net
Thank You for choosing Vantrue!
– 13 –
Documents / Resources
 |
VANTRUE VP05 Dash Camera Hardwire Kit [pdf] User Guide VP05, VP05 Dash Camera Hardwire Kit, Dash Camera Hardwire Kit, Hardwire Kit |