V-TAC VT-2424 LED Rgbw Sync Controller
Product Usage Instructions
Installation
- Ensure the power source is disconnected before installation.
- Connect the LED RGBW Sync Controller to the power supply using the provided cables.
- Securely mount the controller in a suitable location using screws or adhesive tape.
Configuration
- Power on the LED RGBW Sync Controller.
- Use the control interface to select the desired color or lighting effect for each channel.
- Adjust brightness and speed settings as needed.
Maintenance
- Regularly check the connections for any loose cables.
- Clean the controller surface with a soft, dry cloth to prevent dust buildup.
- Avoid exposing the controller to moisture or extreme temperatures.
TECHNICAL DATA
- MODEL VT-2424
- SKU 3338
- OUTPUT 4 Channel
- STATIC POWER CONSUMPTION <1 W
- OUTPUT CURRENT <6 A (Each Channel)
- OUTPUT POWER 12V:228W, 24V:576W
- RATED LOAD 12V:≤288W, 24V:≤576W
- SUPPLY VOLTAGE DC: 12V-24V Optional
- REMOTE DISTANCE ≤0m
- OPERATION VOLTAGE -20°C to +60°C
- IP RATING IP20
- DIMENSION 80x90x24 mm
INTRODUCTION & WARRANTY
- Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference.
- If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase.
- The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear.
- The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- For Indoor Use only
MULTI-LANGUAGE MANUAL QR CODE Please scan the QR code to access the manual in multiple languages.
PRODUCT DESCRIPTION
- Led RGBW Controller adopts the most advanced PWM (Pulse Width Modulation) digital technology with 4-channel constant voltage led RGBW controller. This model is designed for RGBW/Y led products. Adopts RF 24 key remote, RGB and W each have independently control area without interference. Especially, it is designed with synchroniza tion function. It is convenient to use RJ45 connector to connect multiple controllers together, and achieve the synchronization function of thousands of meters led strips. In theory, they can be connected numerous.
DIRECTION OF USE
- Adopt RF wireless 24-key remote control, function of each button as below:
If a new-coded-remote is needed, re-pairing the remote and the receiver before using as below oper-ation instruction:
- Step 1: Pressing key “Seven colors gradually change” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
- Step 2: Continuously to press the key “Seven colors gradually change “ for 3 times with in 5 sec-onds after step 1 ,the brightness of LEDs will change from 50% -10% as responding.
- Code learning successfully, the LEDs will be back to the state before the power off, and the re-ceiver can control by the remote.
If not, please re-operate from step 1 to 2.
TYPICAL APPLICATIONS
FAQs
Q: How do I reset the LED RGBW Sync Controller to factory settings?
A: To reset the controller, locate the reset button (if available) and press it for 10 seconds until all settings are cleared.
Q: Can I use this controller with third-party LED lights?
A: It is recommended to use this controller with compatible LED lights to ensure proper functionality and performance.
Documents / Resources
 |
V-TAC VT-2424 LED Rgbw Sync Controller [pdf] Instruction Manual VT-2424, 3338, VT-2424 LED Rgbw Sync Controller, VT-2424, LED Rgbw Sync Controller, Rgbw Sync Controller, Sync Controller |