V I V O MOUNT-KB05-4D-W Clamp on Keyboard Tray with Pencil Drawer

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD 

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

• A (x1)
  Keyboard Tray
  
• B (x1)
  Pencil Drawer
  
• C (x2)
  Slider Bracket
  
• D (x2)
  Pad
  
• E (x2)
  Clamp
  
• F (x2)
  Drawer Slider
  
• G (x2)
  Connecting Plate
  
• H (x1)
  Baffle
  
• S-A (x6)
  M4x7mm Screw
  
• S-B (x8)
  M5x12mm Screw
  
• S-C (x4)
  ST5x12mm Screw
  
• S-D (x12)
  M5x12mm Screw
  

TOOLS NEEDED

• Phillips Screwdriver
  

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1 

Assemble Slider Brackets (C) to Clamps (E) using M4x7mm Screws (S-A). Tighten with a Phillips screwdriver.

STEP 2 

Assemble Keyboard Tray (A) pieces together using Connecting Plates (G), Baffle (H), M5x12mm Screws (S-D), and a Phillips screwdriver.

STEP 3 

Assemble the slider brackets with clamps to Keyboard Tray (A) using M5x12mm Screws (S-B), and tighten with a Phillips screwdriver. The clamps must be on the opposite end from the center cable guide.

STEP 4 

Mount assembled Pencil Drawer (B) to the underside of Keyboard Tray (A) using ST5x12mm Screws (S-C) with a Phillips screwdriver. Slide Pencil Drawer (B) back into the open ends of Drawer Sliders (F) until they are latched together.

STEP 5

Place Pads (D) on the underside of Clamp (E). Place the assembled keyboard mount on the edge of the desk and tighten Clamps (E). NOTE: To ensure keyboard tray is level, do not over-tighten Clamps (E).

Customer Support

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us

SKU: MOUNT-KB05-4D/W

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. Instruction Manual https://vivo-us.com/products/mount-kb05-4d

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

309-278-5303	AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent!	AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com	AVG. RESPONSE TIME (within office hrs): 1HR 8M 23% within < 15m 38% within < 30m 61% within < 1hr 83% within < 2hr 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Documents / Resources

V I V O MOUNT-KB05-4D-W Clamp on Keyboard Tray with Pencil Drawer [pdf] Instruction Manual MOUNT-KB05-4D-W, MOUNT-KB05-4D-W Clamp on Keyboard Tray with Pencil Drawer, Clamp on Keyboard Tray with Pencil Drawer, Keyboard Tray with Pencil Drawer, Tray with Pencil Drawer, Pencil Drawer, Drawer

References

• User Manual