UTV Stereo UTVS-RZR-AMPMT-DASH19 19 Plus RZR Dashboard Amplifier Mount
Product Information
Specifications
- Parts Included: 1 Triple Amp Mount & 5 Self Tapping Screws
- Part Number: UTVS-RZR-AMPMT-DASH19
INSTRUCTIONS FOR USE
- Step 1: Remove the hood.
- Step 2: Remove the 2 speed clips & 4 Torx screws on the upper dash and remove the dash.
- Step 3: Remove passenger side fender. (Reference Picture 1)
- Step 4: Remove passenger upper dash pocket. (Reference Picture 2)
- Step 5: Remove both bolts on the front passenger cage.
- Step 6: Move the inner fender up and out of the way. You can zip tie the fender up to the roof without completely removing it. (Reference Picture 3 & 4)
- Step 7: Relocate GPS antenna wire from the ride command under the crossbar and back into the ride command unit. (Reference Picture 5 & 6)
- Step 8: Remove bolt from driver side fender. (Reference Picture 7)
- Step 9: Slide amp mount into place. (Reference Picture 8)
- Step 10: Screw in self-tapper through the provided holes on the amp mount. (Reference Picture 8)
NEED HELP?
EMAIL TECH SUPPORT ANEED HELP?
- CALL TECH SUPPORT: 480.616.2299 OR
- EMAIL US AT: INFO@UTVSTEREO.COM OR
- CALL: 480.616.2299
- T: INFO@UTVSTEREO.COM
frequently Asked Questions
Q: Where can I get further support or assistance?
A: For technical support, contact: support@utvstore.com or call: 480-616-2299.
Documents / Resources
 |
UTV Stereo UTVS-RZR-AMPMT-DASH19 19 Plus RZR Dashboard Amplifier Mount [pdf] Instructions UTVS-RZR-AMPMT-DASH19 19 Plus RZR Dashboard Amplifier Mount, UTVS-RZR-AMPMT-DASH19, 19 Plus RZR Dashboard Amplifier Mount, RZR Dashboard Amplifier Mount, Dashboard Amplifier Mount, Amplifier Mount |
