Utec V2.3 Smart Plug
Smart Plug Terms & Policies
Before using all U-tec products, please read all applicable terms, rules, policies, and usage provisions found at www.u-tec.com/company/privacy. By using your device, you agree to be bound by the U-tec Privacy Policy.
What’s in the Box
- 1x Smart Plug
- 1x User Guide
Need Help?
For technical documents and more Please visit support.u-tec.com
Product Outline
Technical Specifications
- Model UPO1 120V-, 60Hz Max.15A Resistive Load
- Communication WiFi 802.11 b/g/n 2.4 GHz Bluetooth 5.0
- Operating Temperature -4° F -104° F / -2o·c – 4o•c
- Operating Humidity: <95%
- Weather Resistant Indoor Use Only
Three Working Modes
Get the App 
- Please search “U home by U-tec” in the App Store (iOS) or “U home” in the Play Store (Android).
- Scan the QR code to download the App
Add Device to Enter Smart Mode
Select the”+” icon in the app’s main interface to add the new device, then follow the app instructions to finish the setup process. 
Two Methods to Power On/ Off
- Control by App
- Control by On/Off Button
Child Mode (OnlyApp)
In Child Mode, the plug can only be turned On/Off via the U home app to avoid misoperation by children.
Enable and Disable
- Go to the settings page to enable/disable Child Mode.
- Another way to disable Child Mode is to press the physical On/Off button on the plug 5 times. The status indicator will turn blue.
One Method to Power On/ Off
- Only control by App.
2024 U-tec Group Inc. U-tec brands and products are trademarked and protected under law in the United States. Unauthorized use is prohibited.
Standalone Mode (NoApp)
In Standalone Mode, the smart plug is used in the same way as a common plug.
Enter and Cancel
- After reset, if the plug is not configured with the app within 5 minutes, the smart plug will enter standalone mode.
- If you want to cancel the standalone mode, please reset it and then set up the plug with the app.
One Method to Power On/ Off
Only controlled by the On/Off Button.
Smart Home Platform Integration
Smart Plug also works with Amazon Alexa, Google Assistant, I FTTT, and SmartThings when the device is set up in the U Home App.
Online User Guide
Scan the QR code to view the User Guide or view: www.u-tec.com/power/plug/guide
- Classification of control according to protection against electric shock: Class I
- Number of cycles of actuation (M): 10000
- Type of disconnection: Micro-disconnection
- Additional features of actions: 1. B
- pollution degree: 2
- Glow wire temperature: 550 / 850°C
- Rated impulse voltage: 1.5KV
- Period of electric stress across insulating parts: Long period
- Make sure to use this product together with the 15A circuit breaker in the upstream
- Applicant name: U-tec Group Inc
- Address: 32920 Alvarado-Niles Rd Ste 220, Union City, CA, 94587 USA
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, this can be determined by turning the equipment off and on. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator &your body.
IC warning statements
RSS-GEN ISSUE 5, 8.4 User manual notice. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference,
including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
- FCC: 2AJZ2-UP01
- IC: 29605-UPOl
Documents / Resources
 |
Utec V2.3 Smart Plug [pdf] Instructions V2.3, 2024.1.17, V2.3 Smart Plug, V2.3, Smart Plug, Plug |