1. حفاظتی ہدایات
پاور ٹولز چلاتے وقت ہمیشہ حفاظت کو ترجیح دیں۔ ان ہدایات پر عمل کرنے میں ناکامی کے نتیجے میں شدید چوٹ یا املاک کو نقصان پہنچ سکتا ہے۔
- ذاتی حفاظتی سامان (PPE): Always wear safety glasses, hearing protection, and appropriate work gloves. Avoid loose clothing or jewelry that could get caught in moving parts.
- کام کا علاقہ: Ensure your work area is clean, well-lit, and free from clutter. Keep children and bystanders at a safe distance.
- برقی حفاظت: Verify the power supply matches the machine's requirements (110V/220V). Ensure the power cord is in good condition and properly grounded. Do not operate in damp یا گیلے حالات.
- Material Securement: ہمیشہ مضبوطی سے clamp the workpiece before cutting. Unsecured material can shift, causing kickback or inaccurate cuts.
- بلیڈ کی حفاظت: Ensure the blade is correctly installed and tensioned. Never touch the blade while the machine is running or still coasting. Replace dull or damaged blades immediately.
- مشین استحکام: Confirm the band saw is on a stable, level surface. Utilize the locking wheels to prevent movement during operation.
- ایمرجنسی اسٹاپ: ہنگامی اسٹاپ بٹن کے مقام اور آپریشن سے خود کو واقف کرو۔
- خودکار شٹ آف: The machine features an automatic shut-off after completing cuts. Do not bypass this safety feature.
2. پروڈکٹ ختمview
The VEVOR BS-712R is a versatile metal band saw designed for both horizontal and vertical cutting applications. It features a robust motor, variable speed settings, and precise angle adjustment for a wide range of materials.
Image: The VEVOR BS-712R band saw shown in both its horizontal and vertical cutting configurations, highlighting its dual-purpose design. Key features like the 1.1 kW motor, horizontal & vertical cutting, and 4-speed adjustment are indicated.
اہم خصوصیات:
- Powerful 1.1 kW Motor: Delivers consistent power for efficient cutting tasks with a speed of 1680 RPM. Supports 110V/220V dual voltage (pre-wired to 110V).
- Dual Cutting Modes: Easily switches between horizontal and vertical cutting for straight, curved, and intricate shapes.
- Large Cutting Capacity: Rectangular cutting capacity of 7 x 8.25 inches.
- متغیر رفتار کی ترتیبات: Four adjustable speeds (86 FPM, 132 FPM, 178 FPM, 260 FPM) to optimize cutting for various materials. Speed adjustment is achieved by changing the V-belt position on the pulley.
- Precision Angle Adjustment: Saw bow base provides 0° to 45° rotation angles with a locking feature and built-in scale for accurate miter cuts.
- پائیدار تعمیر: Crafted from sturdy, wear-resistant cast iron with a stable base and four rolling wheels for durability and portability.
- Hydraulic Downfeed System: Reduces manual effort and ensures consistent cutting pressure.
- خودکار شٹ آف: Machine automatically stops after completing cuts, preventing motor overrun and extending service life.
- حفاظتی خصوصیات: Includes a chip guard to minimize mess and an emergency stop button.
تصویر: ایک اندرونی view of the 1.1 kW high-performance motor, illustrating its stable power, continuous operation, and high efficiency.
3. سیٹ اپ
Carefully unpack all components and ensure all parts are present before beginning assembly.
- پیک کھولنا: Remove the band saw and all accessories from the packaging. Retain packaging for future transport or storage.
- بیس اسمبلی: Attach the main saw unit to the wheeled base using the provided hardware. Ensure all bolts are securely tightened.
- بلیڈ کی تنصیب:
- بلیڈ گارڈ کو کھولیں۔
- Carefully position the blade around the wheels, ensuring the teeth are pointing in the correct cutting direction.
- Adjust blade tension according to the manufacturer's guidelines (refer to specific markings on the machine if available).
- بلیڈ گارڈ کو بند کریں اور محفوظ کریں۔
- پاور کنکشن: Connect the power cord to a suitable grounded electrical outlet. The unit is pre-wired for 110V. If 220V operation is required, consult a qualified electrician for proper wiring adjustment.
- ورک پیس سپورٹ: Position any external workpiece supports if necessary for long or heavy materials.
4. آپریٹنگ ہدایات
Follow these steps for safe and effective operation of your band saw.
Image: A worker operating the VEVOR BS-712R band saw in a workshop setting, demonstrating its use for cutting materials.
4.1. Selecting Cutting Mode (Horizontal/Vertical)
- افقی کٹنگ: For straight cuts on longer stock. The saw bow is lowered onto the material.
- عمودی کٹنگ: For curved or intricate cuts. The saw bow is positioned upright, and the material is fed manually into the blade.
Image: The band saw configured for vertical cutting, showing examples of curved and manual cutting operations.
4.2. Adjusting Cutting Speed
The cutting speed is adjusted by repositioning the V-belt on the motor pulleys. Always ensure the machine is powered off and unplugged before adjusting the belt.
- Open the belt cover.
- Loosen the motor mount to allow belt movement.
- Move the V-belt to the desired pulley combination for the required speed (86 FPM, 132 FPM, 178 FPM, 260 FPM). Refer to the machine's speed chart for material recommendations.
- Retighten the motor mount and close the belt cover.
Image: A diagram illustrating how to adjust cutting speeds by changing the V-belt position on the pulleys, with recommended speeds for different materials like steel, brass, aluminum, and plastic.
4.3. Setting Cutting Angle
The saw bow base can be rotated from 0° to 45° for miter cuts.
- Loosen the locking mechanism for the saw bow base.
- Rotate the base to the desired angle, using the built-in scale for precision.
- Securely tighten the locking mechanism to prevent movement during cutting.
Image: Visual representation of the 0°-45° adjustable angles for the saw base, showing settings for 0° horizontal cut, 30° bevel cut, and 45° bevel cut.
4.4. سی ایلampورک پیس کے ساتھ
Use the quick-lock clamp plate to firmly secure the material. Ensure the material is stable and will not shift during the cut.
Image: A close-up of the quick-position clamp plate, demonstrating its function for fast clamping and precise material fixation, accommodating various material shapes without shifting.
4.5. Engaging the Hydraulic Downfeed
For horizontal cutting, the hydraulic downfeed system controls the rate at which the saw bow lowers through the material. Adjust the hydraulic cylinder to achieve the desired feed rate.
Image: The hydraulic gravity feed system, showing the mechanism that ensures minimal shifting during cuts and includes a built-in scale for uniform dimensions.
4.6. شروع کرنا اور روکنا
- Press the green START button to begin operation.
- For horizontal cuts, the machine will automatically shut off once the cut is complete.
- Press the red STOP button or the emergency stop button to halt operation at any time.
Image: An illustration of the automatic shut-off feature after cutting, emphasizing security protection, overload protection, and extended service life.
5 دیکھ بھال
Regular maintenance ensures optimal performance and extends the lifespan of your band saw.
- صفائی: After each use, clean the machine to remove metal chips, dust, and debris. Use a brush or shop vacuum. Do not use compressed air as it can embed debris into moving parts.
- بلیڈ معائنہ: Regularly inspect the blade for sharpness, cracks, or missing teeth. Replace worn or damaged blades promptly.
- بلیڈ تناؤ: Check blade tension periodically and adjust as needed to prevent blade breakage or inaccurate cuts.
- چکنا: Apply appropriate lubricant to moving parts, such as the hydraulic cylinder and pivot points, as recommended in the detailed product manual (if available).
- بیلٹ معائنہ: Check the V-belt for wear, cracks, or slippage. Replace if necessary.
- برقی اجزاء: Inspect the power cord and electrical connections for any signs of damage.
6 خرابیوں کا سراغ لگانا
یہ سیکشن عام مسائل کو حل کرتا ہے جن کا آپ کو سامنا ہو سکتا ہے۔
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| مشین شروع نہیں ہوتی | No power, emergency stop engaged, faulty switch | Check power connection, release emergency stop, inspect power switch. |
| Poor cut quality (rough, uneven) | Dull blade, incorrect blade tension, wrong speed setting, unsecured material | Replace blade, adjust blade tension, select appropriate speed, firmly clamp ورک پیس |
| Blade breakage | Incorrect blade tension, wrong blade for material, excessive feed pressure | Adjust blade tension, use correct blade type, reduce feed pressure. |
| موٹر زیادہ گرم ہونا | Overload, insufficient ventilation, continuous operation without rest | Reduce load, ensure clear ventilation, allow motor to cool. |
7. وضاحتیں
Detailed technical specifications for the VEVOR BS-712R Band Saw.
- آئٹم ماڈل نمبر: BS-712R
- طاقت: 1.1 کلو واٹ (1100 واٹ)
- والیومtage: AC110/220V 60Hz (US), AC220V 50Hz (EU)
- Rectangular Cutting Size: 7 x 8.25 انچ
- زیادہ سے زیادہ رفتار: 260 FPM (US), 65 m/min (EU)
- بلیڈ دانت: 5/8 TPI steel
- بلیڈ کی لمبائی: 93 انچ / 2362 ملی میٹر
- Miter Vise Adjustment Angle: 0-45°
- Base Wheels: 4
- آئٹم کا وزن: 407.86 پونڈ / 186 کلوگرام
- پروڈکٹ کے طول و عرض (L x W x H): 47.6" x 25.6" x 41.7" / 1210 x 650 x 1060 ملی میٹر
- Item Height with Blade Upright: 65.8 انچ / 1670 ملی میٹر
- طاقت کا منبع: کورڈڈ الیکٹرک
- شامل اجزاء: 1 x Metal Horizontal Band Saw
Image: A comprehensive diagram showing the dimensions of the VEVOR BS-712R band saw, along with a list of its key specifications including model number, power, voltage, cutting capacity, speed, blade details, and weight.
8. وارنٹی اور سپورٹ
The VEVOR BS-712R Metal Horizontal/Vertical Band Saw comes with a full warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official VEVOR webسائٹ
For technical support, parts, or service inquiries, please contact VEVOR customer service through their official channels. Always provide your model number (BS-712R) and purchase date when seeking support.
آن لائن وسائل: For additional information, FAQs, and product registration, visit the official VEVOR webسائٹ: www.vevor.com
