Philips 44W 4200 lm Motion Sensor LED Security Light Outdoor Instruction Manual

1. پروڈکٹ ختمview

The Philips 44W 4200 lm Motion Sensor LED Security Light is designed for outdoor use, providing bright and efficient illumination. This 2-pack floodlight features a Passive Infrared (PIR) motion sensor, 5000K daylight color temperature, and is built to withstand various weather conditions. Its adjustable heads and multiple operating modes offer versatile lighting solutions for your property.

Image: Philips 44W 4200 lm Motion Sensor LED Security Light (2-pack) in black.

2. حفاظتی معلومات

• تنصیب یا سروسنگ سے پہلے ہمیشہ سرکٹ بریکر پر بجلی بند کر دیں۔
• اگر آپ کو انسٹالیشن کے عمل کے بارے میں یقین نہیں ہے تو ایک مستند الیکٹریشن سے مشورہ کریں۔
• یقینی بنائیں کہ تمام وائرنگ کنکشن محفوظ ہیں اور مقامی برقی کوڈز کی تعمیل کرتے ہیں۔
• Do not attempt to modify the product. Any modifications may void the warranty and create safety hazards.
• بچوں کو تنصیب کے علاقے سے دور رکھیں۔

3. باکس میں کیا ہے۔

Each Philips 44W 4200 lm Motion Sensor LED Security Light package includes the following components:

• LED Security Light Fixture (2 units for this pack)
• ایل ای ڈی لینس
• Mounting Hardware (screws, wire nuts, mounting plate, rubber plug, gasket)
• ہدایت نامہ

Image: Included accessories for installation.

4 خصوصیات

• High Brightness & Wide Beam Angle: Emits 4200 lumens with a 5000K cool daylight color temperature. Two adjustable heads provide customizable coverage.
• High-Sensitivity PIR Sensor: Detects motion within a 0-69ft range and 180° induction angle. Lighting time is adjustable from 1-10 minutes.
• 4 روشنی کے طریقے: Includes Test Mode, Security Mode, Dusk to Dawn Mode, and Manual Override Mode (always-on at 80% brightness for up to 6 hours).
• پائیدار اور ویدر پروف: Constructed with aluminum lamp material, tested for corrosion and rust resistance, and rated IP65 for various weather conditions.
• توانائی کی بچت ایل ای ڈی: Integrated LED design eliminates bulb replacement and reduces electricity costs by up to 80% compared to 220W incandescent fixtures.
• Adjustable Head Design: Customize each light head's angle to suit specific lighting needs.

Image: Key features of the Philips security light.

Image: Adjustable head design for flexible lighting coverage.

Image: Aluminum construction for durability and heat dissipation.

5. تنصیب

The Philips security light is designed for easy installation. It requires hardwiring; a junction box is not included. Follow these general steps for installation:

1. وائرنگ تیار کریں: Ensure power is off at the circuit breaker. Connect the ground wire (green) from the light fixture to the ground wire in the junction box.
2. تاروں کو جوڑیں: Connect the white wire (neutral) from the light fixture to the white wire from the junction box using a wire nut. Connect the black wire (live) from the light fixture to the black wire from the junction box using a wire nut.
3. بڑھتے ہوئے پلیٹ: بڑھتے ہوئے پلیٹ کو جنکشن باکس میں محفوظ کریں۔
4. فکسچر منسلک کریں: Align the light fixture with the mounting plate and secure it with the provided screws. Ensure a tight seal between the lamp and the wall to enhance water resistance.
5. مہر: Apply sealant around the fixture base to prevent water leakage.
6. سروں کو ایڈجسٹ کریں: Adjust the light heads and motion sensor to your desired angles.

Recommended installation height: 8.2 ft.

Image: Easy installation steps for the security light.

Image: Two common mounting methods: eave and wall mounting.

انسٹالیشن ویڈیو

6۔ آپریٹنگ موڈ

The Philips security light offers four distinct operating modes to suit various needs:

تصویر: ختمview of the four available lighting modes.

1. ٹیسٹ موڈ: Can be activated in both daytime and nighttime. When motion is detected, the light turns on for 5 seconds. If no motion, it stays off. This mode is useful for verifying sensor functionality and coverage area during installation.


Image: Test Mode operation.

2. سیکورٹی موڈ: Operates only at nighttime. When motion is detected, the light automatically turns on for a set duration (1, 3, or 10 minutes). If no motion, it stays off.


Image: Security Mode operation.

3. ڈسک ٹو ڈان موڈ: Operates only at nighttime. The light automatically turns on at dusk and turns off at dawn. When motion is detected, the light brightens to 100% and then dims to 20% when no one is around.

Image: Dusk to Dawn Mode operation.
4. دستی اوور رائڈ موڈ: Can be activated in both daytime and nighttime. This mode keeps the light on at 80% brightness for a maximum of 6 hours. To activate, switch the light OFF and ON twice within 3 seconds. To deactivate, switch the light OFF and ON for more than 3 seconds, returning it to sensor mode. The brightness automatically dims from 100% to 80% after 12 minutes in this mode.


Image: Manual Override Mode activation and deactivation.

7. ترتیبات کو ایڈجسٹ کرنا

The motion sensor allows for adjustment of both sensing distance and activated lighting time:

• فاصلہ محسوس کرنا: Adjust the 'DISTANCE' dial on the sensor to set the detection range:
  • ایل (کم): 0-20 فٹ
  • M (میڈیم): 0-39 فٹ
  • H (ہائی): 0-69 فٹ
• Activated Lighting Time: Adjust the 'TIME' dial on the sensor to set how long the light stays on after motion is detected:
  • 1 MIN: 1 minute
  • 3 MIN: 3 minutes
  • 10 MIN: 10 minutes

Image: Dials for adjusting sensing distance and lighting time.

Image: Switch tips for adjusting sensor settings.

8 دیکھ بھال

To ensure optimal performance and longevity of your Philips security light, follow these maintenance guidelines:

• صفائی: وقتاً فوقتاً لائٹ فکسچر اور موشن سینسر لینس کو نرم، ڈی سے صاف کریں۔amp کپڑا کھرچنے والے کلینر یا سالوینٹس کے استعمال سے گریز کریں جو فنش یا الیکٹرانک اجزاء کو نقصان پہنچا سکتے ہیں۔
• معائنہ: Regularly inspect the fixture for any signs of damage, loose wiring, or wear. Ensure the sealant around the base remains intact to maintain its waterproof rating.
• بلب کی تبدیلی نہیں: This unit features integrated LED lighting, meaning there are no bulbs to replace.

9 خرابیوں کا سراغ لگانا

If you encounter issues with your Philips security light, refer to the following common troubleshooting steps:

• لائٹ آن نہیں ہو رہی:
  • سرکٹ بریکر پر بجلی کی فراہمی چیک کریں۔
  • Ensure the motion sensor is not obstructed.
  • Verify the operating mode settings (e.g., if in Security Mode, ensure it's dark enough).
  • Adjust the 'DISTANCE' and 'TIME' settings on the sensor.
• روشنی مسلسل جاری رہتی ہے:
  • Check if the light is in Manual Override Mode. Refer to Section 6 for deactivation instructions.
  • Ensure the 'TIME' setting is not set too high.
  • Verify that there is no continuous motion within the sensor's detection range.
• Motion Sensor Not Detecting:
  • Ensure the sensor lens is clean and free from obstructions.
  • Adjust the 'DISTANCE' setting to a higher sensitivity.
  • Verify the sensor's angle and position to cover the desired area.
  • Test the sensor in 'Test Mode' to confirm functionality.

پروڈکٹ ویڈیو

10. وضاحتیں

11. وارنٹی اور سپورٹ

Philips products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official Philips webسائٹ یا ان کی کسٹمر سروس سے براہ راست رابطہ کریں۔ وارنٹی دعووں کے لیے خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید رکھیں۔

مزید معلومات کے لیے، ملاحظہ کریں۔ ایمیزون پر فلپس اسٹور.