Panasonic ES-CM3A-K

Panasonic ES-CM3A Travel Shaver User Manual

Model: ES-CM3A-K

پروڈکٹ ختمview

The Panasonic ES-CM3A Travel Shaver is a compact, portable electric razor designed for convenient grooming on the go. It features a 3-blade cutting system, beard sensor technology, and USB-C charging for versatile use.

Panasonic ES-CM3A Travel Shaver, front view with cap off

شکل 1: سامنے view of the Panasonic ES-CM3A Travel Shaver with the protective cap removed, showing the foil head.

سیٹ اپ

  1. ان باکسنگ اور ابتدائی معائنہ

    Carefully remove all components from the packaging. Verify that all items listed in the package contents are present and undamaged. The package typically includes the shaver unit, a protective cap, a USB-C charging cable, a cleaning brush, and lubricating oil.

    Panasonic ES-CM3A Travel Shaver with USB-C cable and accessories on a table

    Figure 2: The Panasonic ES-CM3A shaver, USB-C cable, and cleaning accessories laid out, demonstrating its compact size for travel.

  2. ابتدائی چارجنگ

    Before first use, fully charge the shaver. Connect the supplied USB-C cable to the charging port located at the bottom of the shaver. Plug the other end into a compatible USB power source (e.g., computer, wall adapter). The charging indicator lights will illuminate during charging and turn off or change color when fully charged. A full charge provides approximately 60 minutes of operation.

    Panasonic ES-CM3A Travel Shaver charging via USB-C cable

    Figure 3: The shaver connected to a USB-C cable for charging, highlighting its universal charging capability.

آپریٹنگ ہدایات

  1. آن/آف کرنا

    To activate the shaver, slide the protective cap to the right. This action automatically turns the shaver on. To turn it off, slide the cap back to the left until it clicks into place, covering the foil head.

  2. Shaving Techniques (Wet/Dry Use)

    The ES-CM3A can be used for both wet and dry shaving. For dry shaving, ensure your skin is clean and dry. For wet shaving, apply shaving gel or foam to your face or body. Hold the shaver at a right angle to your skin and move it gently against the direction of hair growth. The smart beard sensor technology will automatically adjust motor power based on hair thickness for optimal performance.

    Man shaving his face with Panasonic ES-CM3A Travel Shaver, demonstrating ergonomic control

    Figure 4: A man using the shaver on his face, illustrating the ergonomic design and control during shaving.

دیکھ بھال

  1. شیور کی صفائی

    The shaver is IPX7 waterproof, allowing for easy cleaning under running water. After each use, remove the outer foil frame by pressing the release buttons on the sides. Rinse the foil frame and the inner blades thoroughly under cool tap water. Shake off excess water and allow components to air dry completely before reassembling or storing.

    Panasonic ES-CM3A Travel Shaver being rinsed under running water

    Figure 5: The shaver being cleaned under running water, showcasing its waterproof design for easy maintenance.

  2. چکنا

    For optimal performance and longevity, apply a drop of the provided lubricating oil to the outer foil and inner blades periodically (e.g., once a week or after several uses). Turn the shaver on for a few seconds to distribute the oil evenly.

خرابی کا سراغ لگانا

مسئلہممکنہ وجہحل
شیور آن نہیں ہوتا ہے۔بیٹری ختم ہو گئی ہے۔Charge the shaver fully using the USB-C cable.
مونڈنے کی خراب کارکردگی۔Blades or foil are dull/damaged, or shaver is clogged with hair.Clean the shaver thoroughly. If performance does not improve, consider replacing the outer foil and inner blades.
شیور استعمال کے دوران رک جاتا ہے۔بیٹری کم ہے۔شیور کو ری چارج کریں۔

وضاحتیں

وارنٹی اور سپورٹ

وارنٹی کی معلومات اور کسٹمر سپورٹ کے لیے، براہ کرم آفیشل پیناسونک سے رجوع کریں۔ webسائٹ یا ان کی کسٹمر سروس سے براہ راست رابطہ کریں۔ وارنٹی دعووں کے لیے خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید رکھیں۔

اہم حفاظتی معلومات: Except when charging, always unplug this appliance from the electrical outlet immediately after using. Unplug this appliance before cleaning.