Vortex Optics Micro 3x Red Dot Sight Magnifier V3XM انسٹرکشن مینوئل

تعارف

This manual provides detailed instructions for the proper use, installation, and maintenance of your Vortex Optics Micro 3x Red Dot Sight Magnifier, Model V3XM. This magnifier is designed to integrate with red dot sights, providing 3x magnification. Please note that while compatible with most red dots, it may introduce parallax. This magnifier is not compatible with prism scopes.

باکس میں کیا ہے۔

ان باکس کرنے پر، براہ کرم تصدیق کریں کہ تمام اجزاء موجود ہیں:

• Vortex Micro 3x Magnifier
• Rubber Lens Cover
• لینس کپڑا
• 3 ملی میٹر ہیکس ٹول
• Lower 1/3 Co-witness Shim

سیٹ اپ اور انسٹالیشن

The Micro 3x Magnifier features an integrated quick-release mount for efficient attachment and detachment from your rail system. The adjustable flip mount allows for ambidextrous use (right or left-handed).

Mounting the Magnifier

1. Ensure your firearm is unloaded and safe.
2. Position the magnifier on your Picatinny rail behind your red dot sight.
3. Engage the quick-release lever to secure the mount to the rail. Ensure it is firmly seated.
4. For lower 1/3 co-witness height, attach the included riser plate between the magnifier and the flip mount using the provided mounting screws. Tighten mounting screws to 20 in/lbs.
5. Adjust the flip mount to your preferred side (left or right) by applying direct pressure to engage or disengage the magnifier.

Image: The Vortex Micro 3x Magnifier shown mounted on a rifle, positioned behind a red dot sight, illustrating a typical setup configuration.

Image: An exploded diagram detailing the components of the Micro 3x Magnifier, including the objective lens, ocular lens, focus dial, dot-centering screws (elevation and windage), hex wrench, flip mount, mounting screws, and riser plate. It also shows how to attach the riser plate for lower 1/3 co-witness height.

آپریٹنگ ہدایات

The Micro 3x Magnifier is designed to enhance the effective range of your red dot sight by providing 3x magnification. Its optical system features anti-reflective coatings on all air-to-glass surfaces, which increases light transmission for improved clarity and low-light performance. This results in a wider field of view, better eye relief, a brighter image, and more accurate color tone.

Adjusting the Magnifier

• فوکس ڈائل: Rotate the focus dial, located near the ocular lens, to achieve a sharp image.
• Dot-Centering Screws: Use the provided 3mm hex tool to adjust the dot-centering screws for elevation (top) and windage (side). These adjustments align the red dot within the magnifier's field of view.

تصویر: ایک طرف view of the Vortex Micro 3x Magnifier, highlighting the adjustment dials for windage and elevation, along with the focus ring on the ocular lens.

دیکھ بھال

Proper care and maintenance will ensure the longevity and performance of your Vortex Micro 3x Magnifier.

صفائی

• Use the included lens cloth to gently wipe optical surfaces. For stubborn smudges, a small amount of lens cleaning fluid designed for optics can be applied to the cloth, not directly to the lens.
• Keep the rubber lens covers on when not in use to protect the lenses from dust and debris.
• The magnifier is nitrogen purged, providing water and fogproof performance. Avoid disassembling the unit, as this can compromise its sealed integrity.

خرابی کا سراغ لگانا

If you encounter any issues with your Vortex Micro 3x Magnifier, please review مندرجہ ذیل مشترکہ نکات:

• غیر واضح تصویر: Adjust the focus dial until the image appears sharp. Ensure your red dot sight is also properly focused.
• Red Dot Not Centered: Use the dot-centering screws (elevation and windage) with the 3mm hex tool to align the red dot within the magnifier's field of view. These adjustments are for the magnifier's internal reticle alignment, not for zeroing your red dot sight.
• Mounting Instability: Ensure the quick-release mount is fully engaged and tightened on the rail. Check that all mounting screws are torqued to 20 in/lbs.

For issues not resolved by these steps, please refer to the warranty and support information below.

وضاحتیں

وارنٹی اور سپورٹ

The Vortex Micro 3x Magnifier is backed by Vortex Optics' unlimited, unconditional, lifetime VIP Warranty. This fully transferable promise ensures that if your item becomes damaged or defective, it will be repaired or replaced. This warranty does not cover loss, theft, deliberate damage, or cosmetic damage that does not hinder performance.

For warranty claims or technical support, please contact Vortex Optics directly through their official webسائٹ یا کسٹمر سروس چینلز۔