MAIDeSITe Dual Motor Standing Desk User Manual

پروڈکٹ ختمview

The MAIDeSITe Dual Motor Standing Desk is an electric adjustable workstation designed for home and office use. It features a robust dual-motor system for smooth height adjustments, a spacious 48 x 24 inch walnut desktop, and a 3-tier design for enhanced stability and lifting capacity. This manual provides detailed instructions for assembly, operation, and maintenance to ensure optimal performance and longevity of your desk.

Image: The MAIDeSITe Dual Motor Standing Desk in a typical office setup, showcasing its spacious walnut desktop and integrated control panel.

سیٹ اپ اور اسمبلی

Follow these steps carefully to assemble your MAIDeSITe Dual Motor Standing Desk. It is recommended to have two people for assembly.

اسمبلی ویڈیو گائیڈ

مرحلہ وار اسمبلی ہدایات:

1. Step 1: Split the Crossbeam. Carefully separate the two halves of the crossbeam and remove the center rails.
2. Step 2: Table Legs Assembly. Attach the side bracket column legs to the crossbeam. Secure each leg with 4 M6*12 screws. A total of 8 M6*12 screws are used for this step.
3. Step 3: Attach the Feet. Secure the feet to the bottom of each table leg. Each foot requires 4 M6*14 screws, totaling 8 M6*14 screws for both feet.
4. Step 4: Insert Beams. Place the two center rails back into the assembled table legs, ensuring they are properly aligned.
5. Step 5: Join Together. Align the assembled frame with the holes on the underside of the desktop. Secure the center rails to the crossbeams with 8 M6*14 screws. Then, secure the side brackets to the worksurface with an additional 8 M6*14 screws.
6. Step 6: Handset and Core Assembly. Insert the power plug 90 degrees vertically into the corresponding socket on the controller. Connect the motor cables and the handset cable to the controller. Secure the handset to the underside of the desktop using 2 ST5*16 screws.

آپریٹنگ ہدایات

Your MAIDeSITe standing desk features a digital control panel with memory presets for convenient height adjustment.

کنٹرول پینل کے افعال:

• اوپر/نیچے تیر: Press and hold to adjust the desk height up or down. Release to stop at the desired height.
• میموری پرسیٹس (1, 2, 3, 4): To save a height, adjust the desk to your desired position, then press the 'M' button followed by the desired number (1, 2, 3, or 4). To recall a saved height, simply press the corresponding number button.

ری سیٹ آپریشن:

It is important to perform a reset operation before using your desk for the first time or after a power interruption to ensure proper calibration.

1. Long press the down arrow key for 5 seconds and release it.
2. Long press the down arrow key again. The display will show "RST".
3. Continue to long press the down arrow key until a numerical height appears on the display. The reset is complete.

دیکھ بھال

Regular maintenance helps prolong the life and performance of your standing desk.

• صفائی: ایک نرم استعمال کریں، ڈیamp ڈیسک ٹاپ اور فریم کو صاف کرنے کے لیے کپڑا۔ کھرچنے والے کلینر یا سخت کیمیکل سے پرہیز کریں جو ختم کو نقصان پہنچا سکتے ہیں۔
• کیبل مینجمنٹ: Periodically check and organize cables to prevent tangling and ensure smooth operation.
• سکرو کی تنگی: وقت گزرنے کے ساتھ، پیچ ڈھیلے ہو سکتے ہیں۔ استحکام کو برقرار رکھنے کے لیے وقتاً فوقتاً تمام اسمبلی پیچ کو چیک کریں اور سخت کریں۔
• وزن کی صلاحیت: Do not exceed the maximum weight capacity of the desk (276 lbs) to prevent damage to the motors and frame.

خرابی کا سراغ لگانا

If you encounter issues with your MAIDeSITe standing desk, refer to the common problems and solutions below.

وضاحتیں

وارنٹی اور سپورٹ

For specific warranty information and customer support, please refer to the documentation included with your product or contact MAIDeSITe directly through their official website or the retailer where the product was purchased. General customer support information may be available via the retailer's platform.

مزید مدد کے لیے، آپ ملاحظہ کر سکتے ہیں۔ MAIDeSITe Store on Amazon.