Truper 13499 PRES-1/3T پریشر بوسٹر پمپ صارف دستی

1. تعارف

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Truper 13499 PRES-1/3T 1/3 HP Pressure Booster Pump. Please read these instructions carefully before installation and use to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. حفاظتی معلومات

ہمیشہ درج ذیل حفاظتی تدابیر پر عمل کریں:

• یقینی بنائیں کہ پاور سپلائی پمپ کے والیوم سے ملتی ہے۔tage and frequency (127 V - 60 Hz).
• کسی بھی بحالی یا تنصیب کو انجام دینے سے پہلے بجلی منقطع کریں۔
• پمپ کو آتش گیر مائعات سے نہ چلائیں۔
• پمپ کو منجمد درجہ حرارت سے بچائیں۔
• اگر آپ کو یقین نہیں ہے تو تنصیب کسی مستند پیشہ ور کے ذریعہ کی جانی چاہئے۔
• بچوں اور غیر مجاز افراد کو آپریٹنگ پمپ سے دور رکھیں۔

3. مصنوعات کے اجزاء

The Truper 13499 PRES-1/3T Pressure Booster Pump includes the main pump unit, an integrated pressure switch, and power cord with an on/off switch. Refer to the image below for a visual representation of the pump and its key components.

تصویر 1: Truper 13499 PRES-1/3T Pressure Booster Pump. This image shows the complete pump assembly, including the orange motor housing, the dark gray pump body, brass fittings for water inlet and outlet, and the integrated flow switch with an arrow indicating water flow direction. The power cord with an inline on/off switch is also visible.

کلیدی اجزاء:

• پمپ جسم: Dark gray cast iron housing for the impeller and water channels.
• موٹر ہاؤسنگ: Orange casing protecting the electric motor.
• Inlet/Outlet Fittings: Brass threaded connections for plumbing.
• فلو سوئچ: Orange component with an arrow, detecting water flow to activate the pump.
• پاور کی ہڈی: Electrical connection with an integrated on/off switch.

4. سیٹ اپ اور انسٹالیشن

پمپ کی کارکردگی اور لمبی عمر کے لیے مناسب تنصیب بہت ضروری ہے۔

1. مقام:
   • Install the pump in a dry, well-ventilated area, protected from direct sunlight, rain, and freezing temperatures.
   • اس بات کو یقینی بنائیں کہ کمپن کو کم سے کم کرنے کے لیے پمپ کو ایک مستحکم، سطح کی سطح پر رکھا گیا ہے۔
   • Allow adequate space around the pump for ventilation and maintenance access.
2. پلمبنگ کنکشن:
   • Connect the pump to the water supply line using appropriate plumbing fittings. Ensure all connections are watertight.
   • Observe the flow direction indicated by the arrow on the flow switch (Figure 1). The pump must be installed in line with the water flow.
   • Use flexible connectors to reduce vibration transmission to the plumbing system.
   • Install shut-off valves on both the inlet and outlet sides of the pump for easier maintenance.
3. الیکٹریکل کنکشن:
   • Ensure the power outlet is properly grounded and matches the pump's electrical requirements (127 V - 60 Hz).
   • Plug the pump's power cord into the grounded outlet.
   • Do not use extension cords unless absolutely necessary, and ensure they are rated for the pump's power requirements.
4. پمپ پرائمنگ:
   • Before initial operation, ensure the pump is filled with water to prevent dry running. Open a faucet downstream to allow air to escape.
   • Once water flows steadily from the faucet, close it. The pump is now primed.

5. آپریٹنگ ہدایات

The Truper 13499 PRES-1/3T pump operates automatically based on water flow.

1. ابتدائی آغاز:
   • After installation and priming, ensure the inline switch on the power cord is in the "OFF" position.
   • پمپ کو کسی مناسب الیکٹریکل آؤٹ لیٹ میں لگائیں۔
   • Switch the inline power switch to the "ON" position. The pump will remain off until water flow is detected.
2. خودکار آپریشن:
   • When a water outlet (e.g., faucet, shower) is opened, the flow switch detects water movement.
   • The pump automatically starts, boosting water pressure.
   • When the water outlet is closed, the flow stops, and the pump automatically shuts off after a short delay.
3. ڈیوٹی سائیکل:
   • The pump is designed for intermittent use: 50 minutes of work followed by 20 minutes of rest.
   • The daily maximum operating time is 6 hours. Adhering to this duty cycle will prolong the pump's lifespan.

6 دیکھ بھال

باقاعدگی سے دیکھ بھال بہترین کارکردگی کو یقینی بناتی ہے اور آپ کے پمپ کی زندگی کو بڑھاتی ہے۔

• صفائی: Periodically clean the exterior of the pump to prevent dust and debris buildup. Do not use harsh chemicals.
• رابطے: Regularly check all plumbing and electrical connections for leaks or loose fittings. Tighten as necessary.
• سرمائی کاری: If the pump is installed in an area subject to freezing temperatures, it must be drained and disconnected during winter months to prevent damage.
• معائنہ: نقصان یا پہننے کے کسی بھی نشان کے لیے بجلی کی ہڈی کا معائنہ کریں۔ اگر ضروری ہو تو تبدیل کریں۔

Warning: Always disconnect the pump from the power supply before performing any maintenance.

7 خرابیوں کا سراغ لگانا

This section addresses common issues you might encounter with your pressure booster pump.

8. تکنیکی تفصیلات

9. وارنٹی اور سپورٹ

For warranty information or technical support, please refer to the documentation included with your purchase or contact Truper customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Truper webسائٹ یا ان کے مجاز سروس سینٹرز سے رابطہ کریں۔