ویلڈا ایزی رِنگ اور کلین مائیکرو فائبر موپ اور بالٹی سسٹم یوزر مینوئل

تعارف

This manual provides instructions for the assembly, operation, and maintenance of your Vileda Easy Wring and Clean Microfibre Mop and Bucket System. Please read these instructions carefully before first use and retain for future reference.

An image displaying the Vileda Easy Wring and Clean Microfibre Mop and Bucket set. The set includes a grey bucket with a red wringer and foot pedal, and a mop with a red triangular head and white microfibre strands. The product packaging is visible in the background.

پیکیج کے مشمولات

یقینی بنائیں کہ تمام اجزاء اسمبلی سے پہلے موجود ہیں:

• Vileda Easy Wring and Clean Bucket with Power Spin Wringer
• Telescopic Mop Handle
• Triangular Mop Frame
• Microfibre Mop Head Refill

سیٹ اپ کی ہدایات

1. Mop ہینڈل کو جمع کریں: Connect the sections of the telescopic mop handle by twisting them together until secure. Extend the handle to your desired length by twisting the locking mechanism, pulling the handle, and then twisting to lock it in place.
2. ایم او پی ہیڈ منسلک کریں: Align the triangular microfibre mop head with the triangular mop frame. Press the mop head firmly onto the frame until the hook-and-loop fasteners (Velcro) are securely attached.
3. بالٹی تیار کریں: Place the bucket on a flat, stable surface. Ensure the wringer cage is properly seated within the bucket.

آپریٹنگ ہدایات

1. Fill the Bucket: Fill the bucket with water and your preferred cleaning solution. Do not overfill; ensure the water level is below the top edge of the wringer cage.
2. Wet the Mop: Immerse the microfibre mop head completely into the water in the bucket.
3. Wring the Mop: Place the wet mop head into the wringer cage. Hold the mop handle upright and press down on the red foot pedal repeatedly. The wringer cage will spin, removing excess water from the mop head. The number of presses determines the mop's dampنرس.
4. فرش کو جھاڑنا: ڈی استعمال کریں۔amp mop to clean your floors. The triangular head is designed to reach corners and under furniture effectively.
5. کللا اور دہرائیں: After cleaning an area, rinse the mop head in the water and wring it again as needed.

دیکھ بھال

• Mop Head Cleaning: The microfibre mop head is machine washable. Remove it from the mop frame and wash at temperatures up to 60 degrees Celsius (140 degrees Fahrenheit). Do not use fabric softener or bleach. Air dry.
• Bucket Cleaning: Empty the bucket after each use. Rinse thoroughly with clean water and allow it to air dry to prevent odor and mildew.
• ذخیرہ: Store the mop and bucket in a dry place. Ensure the mop head is dry before storing to prevent bacterial growth.

خرابی کا سراغ لگانا

• Mop Head Not Wringing Effectively: Ensure the mop head is fully inserted into the wringer cage. Press the foot pedal firmly and consistently. Check for any obstructions in the wringer mechanism.
• Mop Handle Not Staying Extended: Twist the locking mechanism on the telescopic handle firmly after extending it to the desired length.
• Water Splashing During Wringing: Ensure the mop head is fully contained within the wringer cage. Do not overfill the bucket with water.

وضاحتیں

وارنٹی اور سپورٹ

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Vileda webسائٹ کسی بھی وارنٹی دعووں کے لیے اپنی خریداری کا ثبوت رکھیں۔

مینوفیکچرر: ویلڈا