بلیڈ BLH3123

بلیڈ 120SR بیٹری ماؤنٹ انسٹرکشن دستی

ماڈل: BLH3123

تعارف

This manual provides essential instructions for the installation, operation, and maintenance of your Blade 120SR Battery Mount (Part Number BLH3123). Please read this manual thoroughly before proceeding with any procedures to ensure proper function and longevity of the component.

حفاظتی احتیاطی تدابیر

  • Always disconnect the battery from the aircraft before performing any installation or maintenance.
  • Use appropriate tools to avoid damaging the component or surrounding parts.
  • چھوٹے حصوں کو بچوں سے دور رکھیں۔

پیکیج کے مشمولات

  • 1x Blade 120SR Battery Mount (BLH3123)
  • (Additional fasteners or components may be included depending on the specific kit)

سیٹ اپ اور انسٹالیشن

This section details the steps required to install the Blade 120SR Battery Mount onto your aircraft.

  1. تیاری: Ensure the aircraft's power is off and the battery is disconnected. Place the aircraft on a stable, clean surface.
  2. Remove Old Mount (if applicable): Carefully unscrew and remove the existing battery mount from the aircraft chassis. Note the orientation and attachment points.
  3. Position New Mount: Align the new Blade 120SR Battery Mount (BLH3123) with the designated mounting points on the aircraft frame. Ensure the orientation matches the original component.
  4. محفوظ پہاڑ: Using the appropriate small screws (typically M1 or M2, not included with mount unless specified), gently secure the battery mount to the chassis. Do not overtighten screws, as this can strip the plastic or threads.
  5. تنصیب کی تصدیق کریں: Gently tug on the installed mount to ensure it is firmly attached and does not wobble.
Blade 120SR Battery Mount (BLH3123)

Image: The Blade 120SR Battery Mount (BLH3123) showing its structure and mounting points. This component is designed to securely hold the battery in place on the Blade 120SR helicopter.

آپریٹنگ ہدایات

Once the battery mount is installed, follow these steps to properly secure and use your battery.

  1. بیٹری داخل کریں: Slide the compatible battery into the designated slot on the battery mount. Ensure it fits snugly without excessive force.
  2. محفوظ بیٹری: If your aircraft model includes a battery strap or clip, use it to further secure the battery in the mount. This prevents movement during flight.
  3. بیٹری کو جوڑیں: Connect the battery's power lead to the aircraft's power connector.
  4. پری فلائٹ چیک: Before flight, always perform a visual inspection to confirm the battery is securely seated and the mount is intact.

دیکھ بھال

Regular inspection and maintenance will help prolong the life of your battery mount.

  • بصری معائنہ: Periodically inspect the battery mount for any signs of cracks, stress marks, or deformation, especially after hard landings or impacts.
  • صفائی: If necessary, gently clean the mount with a soft, dry cloth to remove dust or debris. Avoid using harsh chemicals.
  • فاسٹینر چیک: Ensure all screws securing the mount are tight. Retighten if loose, but do not overtighten.
  • متبادل: If the mount shows significant wear, damage, or no longer holds the battery securely, replace it immediately with a genuine Blade BLH3123 part.

خرابی کا سراغ لگانا

مسئلہممکنہ وجہحل
Battery mount is loose.Mounting screws are loose or stripped.Tighten screws. If threads are stripped, consider using a slightly larger screw (if safe for the aircraft) or replacing the mount/chassis part.
Battery does not fit securely.Incorrect battery size or damaged mount.Ensure you are using the correct battery for the Blade 120SR. Inspect the mount for damage and replace if necessary.
Mount is cracked or broken.اثر نقصان یا مادی تھکاوٹ۔Replace the battery mount with a new Blade BLH3123 part.

وضاحتیں

  • ماڈل: بی ایل ایچ 3123
  • برانڈ: بلیڈ
  • مینوفیکچرر: ہورائزن شوق
  • مصنوعات کے طول و عرض: 3 x 2 x 0.66 انچ (7.62 x 5.08 x 1.68 سینٹی میٹر)
  • آئٹم کا وزن: 0.16 اونس (4.54 گرام)
  • تجویز کردہ عمر: 14 سال اور اس سے اوپر
  • ASIN: B003TRNTCW

وارنٹی اور سپورٹ

For warranty information or technical support regarding your Blade 120SR Battery Mount, please contact Horizon Hobby directly. Refer to the official Horizon Hobby webموجودہ رابطے کی تفصیلات اور وارنٹی شرائط کے لیے سائٹ یا آپ کی مصنوعات کی پیکیجنگ۔

مینوفیکچرر: ہورائزن شوق

Webسائٹ: www.horizonhobi.com

متعلقہ دستاویزات - بی ایل ایچ 3123

پریview بلیڈ سیلنگ فین کے لیے انسٹالیشن اور آپریشن دستی
بلیڈ چھت کے پنکھے کو انسٹال کرنے اور چلانے کے لیے جامع گائیڈ، بشمول حفاظتی ہدایات، حصوں کی فہرست، اور اسمبلی کے اقدامات۔
پریview Blade TB-PR Transponder Bypass Install Guide for Honda Prelude and Acura RL
Comprehensive installation guide for the Blade TB-PR transponder bypass module, detailing wiring, programming, and diagnostics for Honda Prelude (1997-2001) and Acura RL (1998-2004) vehicles.
پریview بلیڈ 120 S2 RC ہیلی کاپٹر انسٹرکشن دستی
Blade 120 S2 RC ہیلی کاپٹر کے لیے جامع گائیڈ، سیٹ اپ، حفاظت، فلائٹ آپریشنز، اور ٹربل شوٹنگ کا احاطہ کرتا ہے۔ شوق رکھنے والوں کے لیے محفوظ ٹیکنالوجی اور جدید کنٹرولز کے بارے میں جانیں۔
پریview بلیڈ نینو S3 RC ہیلی کاپٹر ہدایت نامہ
This document provides comprehensive instructions for the Blade Nano S3 RC helicopter, covering setup, operation, safety precautions, troubleshooting, and maintenance. Learn to fly and care for your Nano S3 with this official guide from Horizon Hobby.
پریview بلیڈ mCX2 ہدایت نامہ - سیٹ اپ، فلائنگ اور مینٹیننس گائیڈ
Blade mCX2 RC ہیلی کاپٹر کے لیے جامع ہدایت نامہ۔ Horizon Hobby سے سیٹ اپ، فلائٹ کنٹرولز، حفاظتی احتیاطی تدابیر، ٹربل شوٹنگ، اور پرزوں کی تبدیلی کے بارے میں جانیں۔
پریview بلیڈ انڈیکٹرکس 200 انسٹرکشن دستی
Blade Inductrix 200 quadcopter کے لیے جامع ہدایت نامہ، سیٹ اپ، آپریشن، حفاظتی رہنما خطوط، اور دیکھ بھال کے طریقہ کار کی تفصیل۔