1. تعارف
The AtlasIED PSR-206 is a zone page powered relay pack designed to provide six independent relay closures for various audio and control applications. This manual provides essential information for proper installation, operation, and maintenance of the device, ensuring reliable performance and system integration.
2. حفاظتی معلومات
WARNING: Risk of electric shock. Do not open the unit. Refer all servicing to qualified personnel.
- کسی بھی تنصیب، دیکھ بھال، یا خرابیوں کا سراغ لگانے کے طریقہ کار کو انجام دینے سے پہلے ہمیشہ بجلی منقطع کریں۔
- Ensure proper grounding of the unit to prevent electrical hazards.
- Adhere to all local and national electrical codes during installation.
- یونٹ کو نمی یا انتہائی درجہ حرارت کے سامنے نہ رکھیں۔
- Use only specified fuse types and ratings for replacement.
3. پروڈکٹ ختمview
The PSR-206 is a robust relay pack featuring six independent relays, powered by a 117 VAC input and providing a 24 VDC output. It is designed for integration into paging and control systems.
تصویر 1: اوپر view of the AtlasIED PSR-206 showing power input, fuse, amplifier output, bus connections, 24 VDC output, and six external switch relay terminals.
اہم خصوصیات:
- Six independent relay closures.
- 117 VAC input power.
- 24 وی ڈی سی 1/2 پر AMP output for external devices.
- مربوط 1 AMP fuse for circuit protection.
- Clearly labeled screw terminals for easy wiring.
4. وضاحتیں
| فیچر | تفصیلات |
|---|---|
| ماڈل نمبر | PSR-206 |
| ان پٹ جلدtage | 117 VAC |
| آؤٹ پٹ والیمtagای/کرنٹ | 24 وی ڈی سی 1/2 پر AMP |
| ریلے کی تعداد | 6 |
| فیوز کی درجہ بندی | 1 AMP |
| شے کا وزن | 6 پاؤنڈ |
| پیکیج کے طول و عرض | 19 x 6 x 5 انچ |
| کارخانہ دار | اٹلس ساؤنڈ |
| پہلی تاریخ دستیاب ہے۔ | 8 دسمبر 2008 |
5. سیٹ اپ اور انسٹالیشن
Careful installation is crucial for optimal performance. Ensure all power is disconnected before proceeding.
5.1 چڑھنا
The PSR-206 can be mounted to a flat surface using appropriate screws through the mounting tabs on the unit's chassis.
5.2 وائرنگ رابطے
- پاور ان پٹ (117 VAC): Connect the unit's power cord to a standard 117 VAC power outlet. The unit is protected by a 1 AMP fuse, accessible on the side.
- 24 VDC Output: The terminals labeled '24 VDC' (+ and -) provide a regulated 24 VDC at 1/2 AMP for powering compatible external devices. Observe polarity.
- External Switches (Relay Control): The terminals labeled 'EXTERNAL SWITCHES' (1-6) along with 'COM' (Common) are used to control the six independent relays. Connect your external control switches between the 'COM' terminal and the desired relay terminal (1 through 6). When a switch is closed, the corresponding relay will activate.
- AMP باہر: These terminals are typically used for connecting to an amplifier's input, often for muting or other control functions during paging. Consult your amplifier's manual for specific wiring.
- OFF BUS: These terminals are for specific system bus connections, often used to signal an 'off-hook' or busy status. Refer to your overall system design for proper integration.
6. آپریٹنگ ہدایات
Once properly installed and wired, the PSR-206 operates automatically based on the signals received from connected external switches.
- ریلے ایکٹیویشن: When an external switch connected to one of the 'EXTERNAL SWITCHES' terminals (1-6) and 'COM' is closed, the corresponding internal relay will activate. This closure can be used to trigger various functions in your audio or control system, such as zone paging, muting, or activating external devices.
- 24 وی ڈی سی پاور سپلائی: The 24 VDC output is continuously available when the unit is powered, providing a stable power source for low-power auxiliary equipment.
7 دیکھ بھال
The PSR-206 is designed for reliable, long-term operation with minimal maintenance.
- صفائی: وقتاً فوقتاً یونٹ کے بیرونی حصے کو نرم، خشک کپڑے سے صاف کریں۔ مائع کلینر یا سالوینٹس استعمال نہ کریں۔
- فیوز کی تبدیلی: If the unit loses power, check the 1 AMP fuse located on the side of the unit. Disconnect power before replacing the fuse. Always replace with a fuse of the identical type and rating (1 AMP).
- کنکشن کا معائنہ: تمام وائرنگ کنکشنز کا سالانہ معائنہ کریں تاکہ یہ یقینی بنایا جا سکے کہ وہ محفوظ اور سنکنرن سے پاک ہیں۔
8 خرابیوں کا سراغ لگانا
عام مسائل اور ان کے ممکنہ حل کے لیے درج ذیل جدول کو دیکھیں۔
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Unit has no power / No indicator lights | No 117 VAC input; Blown 1 AMP فیوز | Verify power outlet functionality. Check and replace 1 AMP fuse if necessary (ensure power is disconnected first). |
| Relay not activating when external switch is closed | Incorrect wiring; Faulty external switch; Damaged relay | Check wiring between external switch and 'COM'/'EXTERNAL SWITCHES' terminals. Test the external switch for functionality. If issue persists, professional service may be required. |
| نمبر 24 VDC آؤٹ پٹ | Internal fault; Overload on 24 VDC output | Ensure no short circuits or excessive load on the 24 VDC output. If the unit has power but no 24 VDC output, professional service is recommended. |
9. وارنٹی اور سپورٹ
For detailed warranty information, technical support, or service inquiries, please contact Atlas Sound directly. Refer to your original purchase documentation or the official Atlas Sound webحالیہ رابطے کی تفصیلات اور وارنٹی شرائط کے لیے سائٹ۔
مینوفیکچرر کا پتہ: 1501 Jack McKay Blvd, Ennis, TX 758HG (Information derived from product labeling)
It is recommended to register your product with Atlas Sound to ensure you receive updates and support.
