Armstrong 19-566 3/8-Inch Drive 6 Point Universal Impact Socket Instruction Manual

1. پروڈکٹ ختمview

The Armstrong 19-566 is a 3/8-inch drive, 6-point universal impact socket designed for demanding applications. Manufactured in the USA, this socket features a unique pinless "4 lug" design, enhancing its strength, durability, and safety during use. It provides true 360-degree rotation of the socket end, allowing for an extended range of motion and smooth operation in various working conditions.

Image 1: The Armstrong 19-566 3/8-Inch Drive 6 Point Universal Impact Socket. This image displays the black oxide finished socket, highlighting its universal joint design for flexible access.

This universal impact socket is engineered for professional use, offering reliable performance and a long service life. Its black oxide finish provides corrosion resistance and a professional appearance.

2. سیٹ اپ اور تیاری

Before using the Armstrong 19-566 universal impact socket, ensure you have the appropriate drive tool and fasteners.

2.1 مطلوبہ اوزار اور سامان

• 3/8-inch drive impact wrench or ratchet.
• Appropriate fasteners (1/2-inch SAE).
• حفاظتی شیشے.
• کام کے دستانے۔

2.2 حفاظتی احتیاطی تدابیر

• Always wear ANSI-approved safety glasses to protect against flying debris.
• ہاتھوں کی حفاظت کے لیے مناسب کام کے دستانے پہنیں۔
• Ensure the impact socket is securely attached to the drive tool before operation.
• Do not use damaged or worn sockets. Inspect the socket for cracks or deformation before each use.
• Use the correct size socket for the fastener to prevent rounding or damage.

3. آپریٹنگ ہدایات

Follow these steps for effective and safe operation of your universal impact socket.

1. درست ساکٹ منتخب کریں: Verify that the 19-566 socket (1/2-inch fastener size) matches the size of the fastener you intend to work with.
2. ڈرائیو ٹول سے منسلک کریں: Securely attach the 3/8-inch drive end of the universal socket to your 3/8-inch drive impact wrench or ratchet. Ensure it clicks into place or is firmly seated.
3. Position the Socket: Place the 6-point end of the socket squarely onto the fastener. The universal joint allows for angular access in tight or obstructed spaces.
4. ٹارک لگائیں: Operate your impact wrench or ratchet to loosen or tighten the fastener. Maintain a firm grip on the drive tool.
5. ساکٹ ہٹائیں: کام مکمل ہونے کے بعد، ساکٹ کو فاسٹنر سے اور پھر ڈرائیو ٹول سے ہٹا دیں۔

The true 360-degree rotation feature of this universal socket is particularly useful for reaching fasteners at awkward angles, reducing the need for multiple extensions or adapters.

4. دیکھ بھال اور دیکھ بھال

Proper maintenance ensures the longevity and performance of your Armstrong universal impact socket.

• صفائی: After each use, wipe the socket clean of any dirt, grease, or debris. A mild solvent can be used if necessary, followed by thorough drying.
• چکنا: Periodically apply a small amount of light machine oil to the universal joint mechanism to ensure smooth 360-degree rotation and prevent corrosion.
• ذخیرہ: Store the socket in a dry environment, preferably in a tool chest or socket rail, to prevent rust and damage.
• معائنہ: Regularly inspect the socket for any signs of wear, cracks, or damage, especially around the drive end and the universal joint. Discontinue use if damage is observed.

5 خرابیوں کا سراغ لگانا

This section addresses common issues that may arise during the use of your universal impact socket.

• ساکٹ ناٹ فٹنگ فاسٹینر:
  حل: Ensure you are using the correct 1/2-inch SAE socket for the fastener. Verify the fastener is not stripped or damaged.
• Socket Sticking on Drive Tool:
  حل: Clean the drive end of the socket and the drive tool. Apply a small amount of lubricant to the drive square if necessary. Ensure the drive tool's retention mechanism is functioning correctly.
• Universal Joint Stiffness:
  حل: The universal joint may require lubrication. Apply a few drops of light machine oil to the joint and work it back and forth to distribute the lubricant.
• فاسٹینر پر ساکٹ پھسلنا:
  حل: This indicates either the wrong size socket is being used, the fastener is severely worn, or the socket itself is worn. Replace the socket or fastener as needed. Always use the correct size.

6. وضاحتیں

Detailed technical specifications for the Armstrong 19-566 Universal Impact Socket.

7. وارنٹی اور سپورٹ

Armstrong Industrial Hand Tools are known for their quality and durability. For specific warranty information or support inquiries regarding your 19-566 universal impact socket, please refer to the official Armstrong product documentation or contact Armstrong customer service directly. General warranty terms typically cover manufacturing defects under normal use.

For further assistance, visit the official Armstrong webسائٹ یا ان کے مجاز تقسیم کاروں سے رابطہ کریں۔