Uponor T-247 BUS Smatrix Base Thermostat
Product Information
Specifications
- Product Name: Uponor Smatrix Base Thermostat D+RH T-247 BUS
- Model Number: CD0000772
- IP Rating: IP20
- Dimensions: 86mm x 86mm x 21mm
- Operating Temperature: 3 seconds
Product Usage Instructions
Installation
- Identify a suitable location on the wall for mounting the thermostat.
- Ensure proper wiring connections are in place according to the provided installation manual.
- Mount the thermostat securely on the wall using appropriate screws and anchors.
- Power on the thermostat and follow the setup instructions displayed on the screen.
Operation
- Use the buttons on the thermostat to navigate through the menu options.
- Set the desired temperature by adjusting the temperature settings on the display.
- Monitor the current room temperature displayed on the thermostat.
- Make adjustments as needed to maintain a comfortable environment.
PRECAUTION
DIMENSION
UNPACKING
CONNECTION
DISPLAY
WIRING
Uponor reserves the right to change the product portfolio and the related documentation without prior notification, in line with its policy of continuous improvement and development.
www.uponor.com/services/download-centre
FAQ
Q: Can I connect multiple thermostats to control different zones?
A: Yes, you can connect multiple Uponor Smatrix Base thermostats to create multi-zone heating control.
Q: Where can I find the latest documentation and software updates for the thermostat?
A: Visit www.uponor.com/services/download-centre for access to the latest documentation and software updates.
Q: How do I reset the thermostat to its factory settings?
A: To reset the thermostat, press and hold the reset button for 10 seconds until the display indicates a reset.
Documents / Resources
 |
Uponor T-247 BUS Smatrix Base Thermostat [pdf] Installation Guide T-247 BUS, T-247 BUS Smatrix Base Thermostat, T-247 BUS, Smatrix Base Thermostat, Base Thermostat, Thermostat |