Untitled T6 Android WIFI Smart 1080p HD LED Portable Projector

Precautions

• Before using the product, please read the instruction manual carefully and keep it in a safe place for emergency use.
• Please use the machine carefully, and do not drop or hit it at high altitude during transportation to avoid damage to the original machine. Please put on the lens protection cover after use to avoid scratches.
• Please use the standard power cord for power.

High temperature

• When the projector is working, it is forbidden to block the air inlet or outlet to avoid damage caused by the high internal temperature of the machine due to poor ventilation.
• Do not look directly at the projector lens with your eyes to avoid damaging your eyes due to strong light.

Electric shock prevention

• In order to prevent electric shock, if there is any problem with the product, please do not disassemble it by yourself (there are no customer-serviceable parts in the machine), please contact professional maintenance personnel for assistance.
• To prevent fire and electric shock, do not expose the machine to rain or moisture.

Working environment

• Only applicable to areas with an altitude of 2000 meters and below.
• Suitable for tropical climate conditions, the maxi mum allowable ambient temperature is 95 °F.

Packing List

• Projector*1
  
• Remote control*1
  
• HDMI cord*1
  
• Power cord*1
  
• Manual cord*1
  

Appearance And Function

1. Front view
   
   1. Power
   2. Directional keys
   3. OK
   4. Return
   5. Home
   6. Vol+
   7. Vol-
   8. Mute
   9. Menu
   10. Input source
   11. Focus left
   12. Focus right
   13. Setting
       
       Remote control
2. Back view
   1. RJ45 Port
   2. VGA input port
   3. USB Port
   4. HDMI input port
   5. AV input port
   6. Earphone output
   7. IR window
   8. Power input port
      

When ceiling mount is required, take out the silicon film (as red shown in the figure)

Signal Source Equipment

Represents the direction of signal transmission.

When connecting the equipment, please pay attention to switching the correspondence signal source.

Power On Connection

Power on step:

1. Projector connect to the power supply;
2. Press the power button or the power on button of the remote control.
   

Installation Mode

1. Press the”” button, and click the [Projection settings].
   
2. Choose projection method.
   
   • Front-Desktop
     
   • Rear-ceiling
     
   • Rear-Desktop
     
   • Front-ceiling
     

Launcher Debugging

Focus knob until the image is clear.

Display Settings

Press the”” button, click the [Projection settings].

• Digital Zoom: Scale the image proportionally.
  
• Four-point keystone correction: Stretch the screen four points to make the screen horizontal and vertical.
  

Basic Setting

1. Projector connect to WIFI
   1. Press the “” button, click the [Network Setting].
      
   2. Select a network and connect.
      
2. Projector connected to Bluetooth
   1. Press the “” button, clinch [Bluetooth Setting].
      
   2. Search bluetooth device name and connect it.
      
3. Mobile phone connected to projector Bluetooth speaker
   1. Press the “up” button on the remote control, and Click the [Speaker Mode] on the [APPS] option.
      
   2. Turn on Bluetooth on your phone, Search bluetooth device name [NL-XXXX]and connect it.
      
4. Apple Phone screen projection
   1. Apple phone and projector connected to the same WiFi.
   2. Press the “up” button on the remote control, and Click the [iOS Cast] on the [APPS] option.
      
   3. On your iOS device. open Control Center and tap Screen Mirroring.
      Select [Bird Cast-XXXX] from the list.
      
5. Android and Microsoft system screen projection
   Press the “up” button on the remote control, and Click the [Miracast] on the [APPS] option.
   
   Enter the interface shown in the figure below.
   
   Android phone screen projection:
   1. Turn on [WLAN].
      
   2. open phone console, click [Smart View]on the Samsung Phone.
      
   3. connect projector device
      [NEW LINK _ xxxx].
      
      Microsoft laptop screen projection:
      1. Press Windows logo key[WIN+k] on your keyboard.
         
      2. Select [NEWLINK_xxxx] to connect and start wireless projection.
         

Troubleshooting

Problems listed below might occur during the operation of your projector. Please refer to the possible factors which might cause the issue to do troubleshooting.

1. Why doesn’t anything work when external USB flash device connected?
   Please make sure your USB drive meets following conditions: (for example: If the format of your USB drive is NTFS, The memory capacity of USB drive must be under 128G. The memory of video must be under 2T)

   Formats of USB Drive	Maximum memory capacity of USB drive	Maximum capacity of a single file
   NTFS	2T	2T
   FAT32	2T	4G
   FAT	2G	2G
   EXFAT	Not Supported	Not Supported

   Support file far fat	Image file	JPEG,PNG,BMP
   	Audio file	MP3,WMA,AAC,WAV,FLAC
   	Video file	MP4,MKV,TS,RMVB,AVl,VOB,MPG

2. Why is the display of the projector available but without audio?
   • The projector or the connected device (PC, TV, etc.) is muted.
   • Dolby sound is not supported.
   • Fire stick: Enter “Setting” and find “Display & Sound”. Then select “on” for “navigation sounds”. Select “Stereo (or PCM)” for “surround sound”.
   • Netflix does not support same screen, there is sound, and the screen will go black.

Documents / Resources

Untitled T6 Android WIFI Smart 1080p HD LED Portable Projector [pdf] User Manual T6 Android WIFI Smart 1080p HD LED Portable Projector, T6, Android WIFI Smart 1080p HD LED Portable Projector, WIFI Smart 1080p HD LED Portable Projector, 1080p HD LED Portable Projector, LED Portable Projector, Portable Projector

References

• User Manual