Uniview IPC540 Network Box Cameras User Guide

IPC540 Network Box Cameras

Network Box Cameras

qr-code

Document Center

Scan the QR code with your phone

Disclaimer and Safety Warnings

Copyright Statement

©2021-2024 Zhejiang Uniview Technologies Co., Ltd. All rights  reserved.  

No part of this manual may be copied, reproduced, translated or  distributed in any form or by any means without prior consent in  writing from Zhejiang Uniview Technologies Co., Ltd (referred to as  Uniview or us hereafter).

The product described in this manual may contain proprietary  software owned by Uniview and its possible licensors. Unless  permitted by Uniview and its licensors, no one is allowed to copy,  distribute, modify, abstract, decompile, disassemble, decrypt, reverse  engineer, rent, transfer, or sublicense the software in any form or by  any means.

Trademark Acknowledgements are trademarks or registered trademarks of Uniview.

All other trademarks, products, services and companies in this  manual or the product described in this manual are the property of  their respective owners.  

EU Authorised Representative

UNV Technology EUROPE B.V. Room 2945, 3rd Floor, Randstad 21-05 G,  1314 BD, Almere, Netherlands.

About This Manual 

  • This manual is intended for multiple product models, and the  photos, illustrations, descriptions, etc, in this manual may be  different from the actual appearances, functions, features, etc, of  the product.  
  • This manual is intended for multiple software versions, and the  illustrations and descriptions in this manual may be different from  the actual GUI and functions of the software.
  • Despite our best efforts, technical or typographical errors may exist  in this manual. Uniview cannot be held responsible for any such  errors and reserves the right to change the manual without prior  notice.
  • Users are fully responsible for the damages and losses that arise  due to improper operation.
  • Uniview reserves the right to change any information in this  manual without any prior notice or indication. Due to such reasons  as product version upgrade or regulatory requirement of relevant  regions, this manual will be periodically updated.

Battery Use Caution

  • When battery is used, avoid:
    –>
    Extremely high or low temperature and air pressure during use,  storage and transportation.
    –> Battery replacement.
  • Use the battery properly. Improper use of the battery such as the  following may cause risks of fire, explosion or leakage of flammable  liquid or gas.
  • Replace battery with an incorrect type;
  • Dispose of a battery into fire or a hot oven, or mechanically  crushing or cutting of a battery;
  • Dispose of the used battery according to your local regulations or

Safety Warnings

The device must be installed, serviced and maintained by a trained professional  with necessary safety knowledge and skills. Before you start using the device,  please read through this guide carefully and make sure all applicable  requirements are met to avoid danger and loss of property.

Storage, Transportation, and Use

  • Store or use the device in a proper environment that meets environmental  requirements, including and not limited to, temperature, humidity, dust,  corrosive gases, electromagnetic radiation, etc.
  • Make sure the device is securely installed or placed on a flat surface to  prevent falling.
  • Unless otherwise specified, do not stack devices.
  • Ensure good ventilation in the operating environment. Do not cover the vents  on the device. Allow adequate space for ventilation.
  • Protect the device from liquid of any kind.
  • Make sure the power supply provides a stable voltage that meets the power  requirements of the device. Make sure the power supply’s output power  exceeds the total maximum power of all the connected devices. Verify that the device is properly installed before connecting it to power. Do not remove the seal from the device body without consulting Uniview  first. Do not attempt to service the product yourself. Contact a trained  professional for maintenance.
  • Always disconnect the device from power before attempting to move the  device.
  • Take proper waterproof measures in accordance with requirements before  using the device outdoors.

Power Requirements

  • Install and use the device in strict accordance with your local electrical safety  regulations.
  • Use a UL certified power supply that meets LPS requirements if an adapter is  used.
  • Use the recommended cordset (power cord) in accordance with the specified  ratings.
  • Only use the power adapter supplied with your device.
  • Use a mains socket outlet with a protective earthing (grounding) connection. Ground your device properly if the device is intended to be grounded.

Regulatory Compliance

FCC Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the  following two conditions: (1) this device may not cause harmful interference,  and (2) this device must accept any interference received, including interference  that may cause undesired operation. the battery manufacturer’s instructions.

Visit  

http://en.uniview.com/Support/Download_Center/Product_Installation/D

LVD/EMC Directive 

This product complies with the European Low Voltage  Directive 2014/35/EU and EMC Directive 2014/30/EU.

WEEE Directive–2012/19/EU 

The product this manual refers to is covered by the  

Waste Electrical & Electronic Equipment (WEEE) Directive  and must be disposed of in a responsible manner.

Battery Regulation- (EU) 2023/1542

Battery in the product complies with the European  

Battery Regulation (EU) 2023/1542. For proper recycling,  return the battery to your supplier or to a designated  collection point.

eclaration/ for SDoC.

Caution: The user is cautioned that changes or modifications not expressly  approved by the party responsible for compliance could void the user’s  authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a  Class A digital device, pursuant to part 15 of the FCC Rules. These limits are  designed to provide reasonable protection against harmful interference when  the equipment is operated in a commercial environment. This equipment  generates, uses, and can radiate radio frequency energy and, if not installed and  used in accordance with the instruction manual, may cause harmful interference  to radio communications. Operation of this equipment in a residential area is  likely to cause harmful interference in which case the user will be required to  correct the interference at his own expense.

Documents / Resources

Uniview IPC540 Network Box Cameras [pdf] User Guide
IPC540, IPC540 Network Box Cameras, Network Box Cameras, Box Cameras, Cameras

References

Leave a comment

Your email address will not be published. Required fields are marked *