Uniview 0235C8YQ Intelligent Recognition Access Control Terminal User Guide

Packing List

No.	Name	Qty	Unit
1	Intelligent recognition access control terminal	1	PCS
2	Screw components	2	Set
3	Wall mount bracket	1	PCS
4	T10 screwdriver	1	PCS
5	Drill template	1	PCS
6	Tail cable	1	PCS
7	Cover	1	PCS
8	Product documents	1	Set

Product Introduction

The appearance, dimensions, structure, and tail cables may vary with device models.

Dimensions 

• Model 1
  
• Model 2
  

Structure
The intelligent recognition access control terminal includes intelligent recognition terminal and plug gable verification module.

• Intelligent recognition terminal
  
• Plug gable verification module
  

1. Microphone
2. Camera
3. Display screen
4. Illuminator
5. Reset button
6. Cable interface
7. Speaker
8. Network interface
9. Tamper proof button
10. Pass-through indicator
11. Card reading area
12. QR code reading area

Cable

Name	Color	Description
Door magnetic input	Light green	Door magnetic, button, and door lock cables
Button input	Yellow/Black
Door lock_NC	Pink
Door lock_COM	White/Yellow
Door lock_NO	White/Green
GND	Black
RS485_A	Orange	RS485, Wieg and input, and Wieg and output cables
RS485_B	Yellow
GND	Black
Wieg and input_D 0	Blue
Wieg and input_D 1	White
Wieg and output_D 0	Brown
Wieg and output_D 1	Green
Alarm input_1	Purple	Alarm input and alarm output cables
Alarm input_2	White/Purple
Alarm output_NC	Gray
Alarm output_COM	White/Orange
Alarm output_NO	White/Blue
12V power input	Red	Power cable
GND	Black

Device Installation

1. Paste the drill template on the wall with the arrow facing upward. Use a Ø6-6.5mm drill bit to drill two 30mm-depth holes on the A position, and then insert expansion bolts. Be careful not to damage cables in the wall.
   
2. Place the bracket straight up with the arrow facing outward. Knock the expansion bolts into the holes with the pointed tail screws.
   
3. Connect all cables.
   1. Connect one end of the network cable (user-prepared) to the network interface on the rear panel, and the other end to the switch or other network device.
   2. Connect one end of the integrated cables to the corresponding cable interface on the rear panel, and the other end to the door sensor, alarm, and other devices according to the actual networking.
4. Fasten the cover to the access control terminal with three short Phillips screws.
   
5. Secure the access control terminal to the bracket.
   1. Use a T10 screwdriver to loosen the tamper proof screws on both sides of the device that fix the pluggable verification module in the counterclockwise direction (the bottom module is designed with an allowance, and the screws will not fall off after loosening, as shown in the left figure).
   2. Align the hook on the bracket with the groove on the terminal, and secure the terminal to the bracket (as shown in the right figure).
   3. Tighten the two tamper proof screws again.
      

Startup

After the device is installed correctly, connect one end of the power adapter (user-purchased or prepared) to the power interface of the device and the other end to the mains supply.

Web Login

Default IP address	Note: For security, please set a strong password of at least nine characters including uppercase and lowercase letters, digits, and special characters. You are strongly recommended to regularly change the device password and keep it secure to ensure that only authorized users can log in.
192.168.1.13
Default
username/password admin/123456

Recognition Requirements

1. Photo Collection Requirements
   • General requirement : Facing the camera without wearing a hat, cap, etc.
   • Range requirement : The photo should show both ears and the complete part from the top of the head (including hair) to the bottom of the neck of the person.
   • Color requirement : True color photo.
   • Makeup requirement : Heavy makeup is not allowed, including eyebrow makeup and eyelash makeup.
   • Background requirement : A solid color such as white or blue is acceptable.
   • Light requirement : Not too dark or too bright, and not partially dark and partially bright.
2. Recognition Position
   The correct recognition position is shown in the figure below. Please avoid person in the area 1 or area 2.
   
3. Expression and Posture
   1. Expression
      Keep a natural expression as shown below.
      
   2. Posture
      The correct and incorrect poses are as shown below
      

Disclaimer and Safety Warnings

Copyright Statement
©2024 Zhejiang Uniview Technologies Co., Ltd. All rights reserved.
No part of this manual may be copied, reproduced, translated or distributed in any form or by any means without prior consent in writing from Zhejiang Uniview Technologies Co., Ltd (referred to as Uniview or us hereafter).

The product described in this manual may contain proprietary software owned by Uniview and its possible licensors. Unless permitted by Uniview and its licensors, no one is allowed to copy, distribute, modify, abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the software in any form or by any means.

Trademark Acknowledgements
are trademarks or registered trademarks of Uni view.
All other trademarks, products, services and companies in this manual or the product described in this manual are the property of their respective owners.
Export Compliance Statement
Uniview complies with applicable export control laws and regulations worldwide, including that of the People’s Republic of China and the United States, and abides by relevant regulations relating to the export, re-export and transfer of hardware, software and technology. Regarding the product described in this manual, Uniview asks you to fully understand and strictly abide by the applicable export laws and regulations worldwide.

EU Authorised Representative
UNV Technology EUROPE B.V. Room 2945,3rd Floor,Randstad 21-05 G,1314 BD,Almere,Netherlands.
Privacy Protection Reminder
Uniview complies with appropriate privacy protection laws and is committed to protecting user privacy.
You may want to read our full privacy policy at our website and get to know the ways we process your personal information. Please be aware, using the product described in this manual may involve the collection of personal information such as face, fingerprint, license plate number, email, phone number, GPS. Please abide by your local laws and regulations while using the product.
About This Manual 

• This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc, in this manual may be different from the actual appearances, functions, features, etc, of the product.
• This manual is intended for multiple software versions, and the illustrations and descriptions in this manual may be different from the actual GUI and functions of the software.
• Despite our best efforts, technical or typographical errors may exist in this manual. Uniview cannot be held responsible for any such errors and reserves the right to change the manual without prior notice.
• Users are fully responsible for the damages and losses that arise due to improper operation.
• Uniview reserves the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated.

Disclaimer of Liability

• The product described in this manual is provided on an “as is” basis. Unless required by applicable law, this manual is only for informational purpose, and all statements, information, and recommendations in this manual are presented without warranty of any kind, expressed or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for a particular purpose, and noninfringement.
• To the extent allowed by applicable law, in no event shall Uniview’s total liability to you for all damages for the product described in this manual (other than as may be required by applicable law in cases involving personal injury) exceed the amount of money that you have paid for the product.
• Users must assume total responsibility and all risks for connecting the product to the Internet, including, but not limited to, network attack, hacking, and virus. Uniview strongly recommends that users take all necessary measures to enhance the protection of network, device, data and personal information. Uniview disclaims any liability related thereto but will readily provide necessary security related support.
• To the extent not prohibited by applicable law, in no event will Uniview and its employees, licensors, subsidiary, affiliates be liable for results arising out of using or inability to use the product or service, including, not limited to, loss of profits and any other commercial damages or losses, loss of data, procurement of substitute goods or services; property damage, personal injury, business interruption, loss of business information, or any special, direct, indirect, incidental, consequential, pecuniary, coverage, exemplary, subsidiary losses, however caused and on any theory of liability, whether in contract, strict liability or tort (including negligence or otherwise) in any way out of the use of the product, even if Uniview has been advised of the possibility of such damages (other than as may be required by applicable law in cases involving personal injury, incidental or subsidiary damage).

Network Security 

Please take all necessary measures to enhance network security for your device.
The following are necessary measures for the network security of your device:

• Change default password and set strong password: You are strongly recommended to change the default password after your first login and set a strong password of at least nine characters including all three elements: digits, letters and special characters.
• Keep firmware up to date: It is recommended that your device is always upgraded to the latest version for the latest functions and better security. Visit Uniview’s official website or contact your local dealer for the latest firmware.
• The following are recommendations for enhancing network security of your device:
• Change password regularly: Change your device password on a regular basis and keep the password safe. Make sure only the authorized user can log in to the device.
• Enable HTTPS/SSL: Use SSL certificate to encrypt HTTP communications and ensure data security.
• Enable IP address filtering: Allow access only from the specified IP addresses.
• Minimum port mapping: Configure your router or firewall to open a minimum set of ports to the WAN and keep only the necessary port mappings. Never set the device as the DMZ host or configure a full cone NAT.
• Disable the automatic login and save password features: If multiple users have access to your computer, it is recommended that you disable these features to prevent unauthorized access.
• Choose username and password discretely: Avoid using the username and password of your social media, bank, email account, etc, as the username and password of your device, in case your social media, bank and email account information is leaked.
• Restrict user permissions: If more than one user needs access to your system, make sure each user is granted only the necessary permissions.
• Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and the system will automatically forward port data, which results in the risks of data leakage. Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been enabled manually on your router.
• Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this function, it is recommended you disable multicast on your network.
• Check logs: Check your device logs regularly to detect unauthorized access or abnormal operations.
• Isolate video surveillance network: Isolating your video surveillance network with other service networks helps prevent unauthorized access to devices in your security system from other service networks.
• Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized physical access.
• SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended.

Learn More
You may also obtain security information under Security Response Center at Uniview’s official website.
Safety Warnings
The device must be installed, serviced and maintained by a trained professional with necessary safety knowledge and skills. Before you start using the device, please read through this guide carefully and make sure all applicable requirements are met to avoid danger and loss of property.
Storage, Transportation, and Use 

• Store or use the device in a proper environment that meets environmental requirements, including and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc.
• Make sure the device is securely installed or placed on a flat surface to prevent falling.
• Unless otherwise specified, do not stack devices.
• Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow adequate space for ventilation.
• Protect the device from liquid of any kind.
• Make sure the power supply provides a stable voltage that meets the power requirements of the device. Make sure the power supply’s output power exceeds the total maximum power of all the connected devices.
• Verify that the device is properly installed before connecting it to power.
• Do not remove the seal from the device body without consulting Uniview first. Do not attempt to service the product yourself. Contact a trained professional for maintenance.
• Always disconnect the device from power before attempting to move the device.
• Take proper waterproof measures in accordance with requirements before using the device outdoors.

Power Requirements

• Install and use the device in strict accordance with your local electrical safety regulations.
• Use a UL certified power supply that meets LPS requirements if an adapter is used.
• Use the recommended cordset (power cord) in accordance with the specified ratings.
• Only use the power adapter supplied with your device.
• Use a mains socket outlet with a protective earthing (grounding) connection.
• Ground your device properly if the device is intended to be grounded.

Battery Use Caution

• When battery is used, avoid:
  • Extremely high or low temperature and air pressure during use, storage and transportation.
  • Battery replacement.
• Use the battery properly. Improper use of the battery such as the following may cause risks of fire, explosion or leakage of flammable liquid or gas.
  • Replace battery with an incorrect type;
  • Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery;
• Dispose of the used battery according to your local regulations or the battery manufacturer’s instructions.
• Personal safety warnings:
  • Chemical Burn Hazard. This product contains a coin cell battery. Do NOT ingest the battery. It can cause severe internal burns and lead to death.
  • Keep new and used batteries away from children.
  • If the battery compartment does not close securely, stop using the product and keep it away from children.
  • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Regulatory Compliance

FCC Statements 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Visit http://en.uniview.com/Support/Download_Center/Product_Installation/Declaration/ for SDoC.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

LVD/EMC Directive
	This product complies with the European Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU.
WEEE Directive–2012/19/EU
	The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner.
Battery Regulation- (EU) 2023/1542
Battery in the product complies with the European Battery Regulation (EU) 2023/1542. For proper recycling, return the battery to your supplier or to a designated collection point.

Documents / Resources

Uniview 0235C8YQ Intelligent Recognition Access Control Terminal [pdf] User Guide 0235C8YQ, 0235C8YQ Intelligent Recognition Access Control Terminal, Intelligent Recognition Access Control Terminal, Recognition Access Control Terminal, Access Control Terminal, Control Terminal, Terminal

References

• User Manual