Car Play & Android Auto Player
Product specification
1. Product overview
The Player uses a wide-angle camera mounted to capture images and transmit them to the real-time integration equipment. With the help of this system, drivers can intuitively and effectively see obstacles and pedestrians in the rear of the car, reducing the occurrence of collisions and other accidents.
2. Product composition list
List of product accessories:
| Name | Instructions |
| The host | Touch control / Bluetooth / WIFI / audio output |
| The power cord | 7V-32V / integrated line/cigarette lighter |
| Pull back camera | Used to observe the environment outside the car |
| Pull the headphone extension cord back | Pull back headphone cable/double shield |
| Monitor base | To support the display and fix it on the air outlet |
| SD card | Class10 SD card |
| AUX cable | Audio signal transmission cable/3.5mm jack |
| Specification | Product parameters and operation process, etc |
| Accessories | For fixing bracket |
Note: Product accessories may vary with the production batch or product generation, please refer to the actual product received.
3. Product description
| Project | Function introduction | Performance indicators |
| system | Language | Simplified Chinese / Traditional Chinese / English / Russian/ Spanish / French / German / Japanese / Korean / Italian/ Portuguese（For reference only） |
| Operation interface | Graphical menu operation | |
| Mode of operation | Touch | |
| Video display | Real-time display | High-definition IPS screen |
| Smart connected | Wi-Fi | Supports Apple CarPlay / Android Auto |
| The video store | SD card | Save playback or save file |
| Audio part | Audio emission | Support local speaker playback, BT for Carplay/Auto, FM, AUX |
| Power part | The power input | The step-down line supports a wide voltage range of 7-32V, and has car-grade anti-surge, anti-reverse connection and other power protection. |
| Other | Working temperature | -4~149 ℉ |
4. Wiring instructions
| serial number | interface | illustrate |
| 1 | Type C interface | Motherboard power supply interface |
| 2 | Cigarette lighter | Cigarette lighter takes electricity directly; Note: Please use the standard cigarette lighter. If you don’t use our original charger, you need to buy a high-quality cigarette charger that meets the standards, otherwise it is easy to damage the machine or cause other injuries due to insufficient voltage and heat, and the FM transmission function will not work properly. |
5. Camera installation
Locate the drilling hole, find the appropriate installation position in the license plate attachment, mark it with a pen and then drill the appropriate size of the screw hole. Fix the camera to the rear of the car with screws, the reversing trigger wire (red thin wire) needs to be connected to the positive pole of the reversing light, and finally use the camera extension cable to connect to the monitor.(Images are for reference only)
6. Interface specification
- Home button: Click to return to the main interface of the smart screen
- Brightness button: Click to adjust the brightness of the screen
- Volume button: Click to adjust the volume
- Camera: Click to view the rear camera screen
- Android Cast: Android phone can mirror screen
- WiFi video: Drive footage can be viewed on your phone
- Audio output: click to select the sound playing mode
- Apple CarPlay: dedicated car screen projection program for Apple mobile phones
- Andorid Auto: a dedicated car screen projection program for Android phones
- AirPlay: Apple mobile phone can mirror screen
- Playback: View driving footage
- Settings: Click to enter the function setting interface
Note: May vary with the production batch or product generation, please refer to the actual product received.
A. Apple CarPlay
Click the [Apple CarPlay] button to enter the Apple CarPlay. Turn on the Wi-Fi and Bluetooth of the mobile phone first, then use your mobile phone to connect to the player’s Bluetooth, and after the connection is successful, press the mobile phone prompt to enable CarPlay.
(Turn off your phone’s Wi-Fi and Bluetooth to disconnect, Just turn off the WiFi button alone, it will keep trying to reconnect.)
(1)
(2)
(3)
B. Andorid Auto
Click the [Android Auto] button to enter the Android Auto. Turn on the Wi-Fi and Bluetooth of the mobile phone first, then use your mobile phone to connect to the player’s Bluetooth, and after the connection is successful, press the mobile phone prompt to enable Android Auto.
(Turn off your phone’s Wi-Fi and Bluetooth to disconnect)
C. Apple Airplay
Click the [AirPlay] button to enter the AirPlay. Turn on the Wi-Fi of the mobile phone first, then use your mobile phone to connect to the player’s Wi-Fi, and after the connection is successful, Select the smart screen in the screen mirror in the iPhone control center.
Apple AirPlay can transmit videos, audio and pictures from iPhone to car device to play to watch. It is fundamentally different from the Bluetooth wireless. The transmission carrier is WIFI.
Note: Only support iPhone mobile phones
D. Android Cast
Click the [Android Auto] button to enter the Android Auto. You need to scan the code with your mobile phone to download, install and run the application.
Turn on the Wi-Fi of the mobile phone first, then use your mobile phone to connect to the player’s Wi-Fi, and after the connection is successful, Select application again and follow the prompts.
It can realize the mirror projection of the mobile phone and the car machine. Note: Only supports Android phones
E. WiFi video
First scan the QR code to download the APP. After downloading, open the APP, and follow the APP prompts to connect to the WiFi of the machine. The APP allows you to view driving footage on your phone.
(Turn off the mobile phone WiFi key to disconnect. Some models do not have this feature.)
F. DVR
As shown in the figure, the main page will not display the camera image, you need to click the Dvr button to view the camera image. After inserting the card, the system automatically enters the recording mode.
 |
Start recording and click Close recording again. |
 |
Lock the video for a few minutes and the data will not be deleted. |
 |
Click to take a photo with one click. |
 |
Click to return to the main interface |
 |
Click to quickly return to the mobile Internet interface |
 |
Turn recording sound on or off. |
Note: Some models do not have this feature.
G. Audio output
As shown in the figure above, click the [Audio Output] button to enter the audio output selection interface.
(1) [Speaker]: The sound will be played from the speaker of the smart screen.
(2) [Carplay/Auto]: Select this mode, and then connect to [Apple CarPlay] or [Android Auto] to cast the screen, you can use the phone’s Bluetooth to directly connect to the original car’s Bluetooth. After the connection is successful, all sounds from the device will be transmitted to the original car speakers via Bluetooth.
(3) [FM]: After selecting this mode, the FM transmission mode will be turned on by default. For example, if the device’s FM transmit band is tuned to FM 106.0 MHz (any unoccupied channel can be used), the car radio will also tune its receive band to the same FM 106.0 Hz. After the connection is successful, all the sounds of the device will be transmitted to the original car speakers through FM transmission.
(Not using the original power cord may result in deterioration of the FM transmission signal or loss of function.)
(4) [AUX]: After selecting this mode, the AUX output mode will be turned on by default. Use the AUX sound source cable to connect the smart screen to the original car. After the connection is successful, all the sounds of the device will be transmitted to the original car speakers through the AUX sound source cable for playback.
8. Troubleshooting
| Item | Problem | Solution |
| 1 | Unable to start (Player supports 7V-32V car use, high voltage cannot be used) | ① Check whether the head of the cigarette lighter power cord is damaged or aging. ② Check whether the fuse of the power plug is disconnected or burned. (Standard with wide voltage power supply, parameters may be slightly different, please consult customer service staff.) |
| 2 | Touch screen function failure | ① Touch is invalid during power-on, wait for normal power-on before operation. ② Check whether the touch is damaged, do not touch the screen with sharp objects, it is easy to scratch and damage. |
| 3 | The rear camera has no image | ① Please use the rear camera provided by the manufacturer. ② Whether the AVIN interface is inserted to the bottom. ③ Check if the camera format matches. |
| 4 | The system is stuck or player overheating | ① Avoid direct sunlight or exposure to sunlight during use. ② After disconnecting the power supply, the temperature of player will be lower than 149 ℉ and work normally. |
| 5 | CarPlay connection failed | ① The first connection takes a little longer. ② Only iPhone supports Carplay. ③ Check that the WiFi and Bluetooth functions of the mobile phone are normal. ④ Enter Settings – General -CarPlay vehicle, delete all records and reconnect. ⑤ Restart the iPhone and reconnect it. |
| 6 | Android Auto connection failed | ① Only Android phones are supported. ② Update Auto and related applications on mobile phones to the latest version. ③ Do not enable VPN on the mobile phone. ④ Check that the WiFi and Bluetooth functions of the mobile phone are normal. ⑤ Restart the Android phone and connect it again. |
Reminder: Please ensure that there is no obstruction between the mobile phone and the device, and the Wi-Fi/Bluetooth signal communication is smooth, otherwise the product functions cannot be used smoothly.
9. Product parameters
| Name | CarPlay&Android Auto Player |
| Chip | High-performance SOC |
| Wireless system | Apple CarPlay, Android Auto |
| Screen | IPS material |
| Storage expansion | 64G≤Class10 SD Card |
| Wireless module | Wi-Fi, BT, FM Launch module |
| Camera | 1 or 2 |
| FM launch | Adjustable |
| Reverse image | Automatic reversing video display |
| Operating Voltage | 7V-32V Adaptive |
| Working power | Lower than 10W |
| Material | ABS/PC |
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).
English/Northern Ireland:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation
WARNING
To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages or playpens. This bag is not a toy.
Documents / Resources
 |
UNITOPSCI Car Play and Android Auto Player [pdf] Instruction Manual Car Play and Android Auto Player, Play and Android Auto Player, Android Auto Player, Auto Player |