UT219 Series Professional Clamp Meters
Product Information
Specifications:
- Brand: Test Equipment Depot
- Model Number: P/N 110401106166X
- Contact: 800.517.8431
- Website: TestEquipmentDepot.com
Product Usage Instructions:
1. Unboxing and Setup:
Upon receiving the product, carefully unbox it and ensure all
components are included as per the manual. Follow the setup
instructions provided in the manual to prepare the product for
use.
2. Powering On:
Connect the product to a power source as outlined in the manual.
Follow the specific steps to power on the device and allow it to
initialize before usage.
3. Testing Procedures:
Refer to the user manual for detailed testing procedures based
on your requirements. Ensure you understand the testing methods and
safety precautions before conducting any tests.
4. Maintenance and Care:
Regularly maintain and clean the product as specified in the
manual to ensure optimal performance and longevity. Store the
product in a safe and dry place when not in use.
Frequently Asked Questions (FAQ):
Q: Can this product be used for outdoor testing?
A: Refer to the product specifications to determine if it is
suitable for outdoor use. Some models may have specific weather
resistance features.
Q: How often should I calibrate the product?
A: Calibration frequency depends on usage and manufacturer
recommendations. Refer to the manual for calibration
guidelines.
Test Equipment Depot – 800.517.8431 – TestEquipmentDepot.com P/N: 110401106166X
The contents of this manual are subject to change without notice.
Test Equipment Depot – 800.517.8431 – TestEquipmentDepot.com
55
56
Documents / Resources
 |
UNI T UT219 Series Professional Clamp Meters [pdf] Instruction Manual UT219, UT219 Series Professional Clamp Meters, UT219 Series, Professional Clamp Meters, Clamp Meters, Meters |