LM Series Laser Rangefinder
“
Product Information
Specifications:
- Model Number: P/N 110401113143X
- Range: 600m
- Compliance: IEC 60825-1:2014, EN 60825-1:2014+A11:2021, EN
50689:2021 CLASS 1 CONSUMER LASER PRODUCT
Product Usage Instructions
Key Functions:
- Power/Transmitting Key: Press for about 1s to turn on the
device - MODE Key: Short press to switch between measurement modes
Measurement Modes:
1. Multifunctional Measurement Modes:
- Distance
- Height
- Angle
- Continuous measurement
- Flag locking function
2. Speed Measurement Mode with SPD indicator
Single Measurement:
Press the key once to measure the distance. The LCD screen will
display the measured distance, target indicator, and additional
data.
Continuous Measurement:
Keep pressing the key to measure continuously. The device offers
flag locking function in Golf mode and constant distance data
refresh in scanning mode.
Stopping Measurement:
Release the key to stop distance-scanning measurement.
Frequently Asked Questions (FAQ)
Q: How do I switch between measurement modes?
A: Short press the MODE button to toggle between different
measurement modes.
Q: What does “–” displayed on the screen mean?
A: “–” indicates that the target is unclear or beyond the
specified range.
“`
P/N: 110401113143X
*Different laser labels show different models and range information.
Range:600m
IEC 60825-1:2014 EN 60825-1:2014+A11:2021 EN 50689: 2021 CLASS 1 CONSUMER LASER PRODUCT
Eye Lens LCD Symbol 1. Distance measurement indicator 2. Measuring mode 3. Angle Data 4. Horizontal and height data 5.Target indicator 6. Horizontal and height measurement indicator 7. Distance Unit 8. Flag indicator
1. 2 keys on the device: the power/transmitting key and the MODE key. Press the power key for about 1s to turn on the device. Short press MODE button to switch between 2 measurement modes. 1) Multifunctional measurement modes (distance /height/angle/continuous measurement and flag locking function) 2) Speed measurement mode with SPD indicator
2. Press the key once and the distance will be measured once. When the distance is measured, a circle will be displayed in the center of LCD screen. After the measurement is finished, the direct distance data between the target and the telescope will be displayed on the top of screen while vertical height data or pitch angle data will be will be displayed in the bottom. If the target is unclear or beyond the specified range, — will be displayed.
Keep pressing the key to measure continuously. The flag lock function is available in Golf mode. In common scanning mode, the distance data of target will constantly refresh on the display. Release the key to stop distance-scanning measurement.
10
Documents / Resources
 |
UNI-T LM Series Laser Rangefinder [pdf] Instruction Manual LM600, LM800, LM1000, LM1200, LM1500, LM Series Laser Rangefinder, LM Series, Laser Rangefinder, Rangefinder |