UltraLux VD70 Voltage Detector
DESCRIPTION
The tester indicates an active voltage in the presence of an alternating electromagnetic field of sufficient strength radiating from the conductor. This allows you to detect a wire break or AC voltage presence.
PRINCIPLE OF OPERATION
PLACEMENT OF THE BATTERIES
- Turn the switch cover anticlockwise to the end.
- Press and hold the switch button.
- Turn anticlockwise to the end.
- Open the switch cover by pulling it slightly.
- Insert two new batteries (1.5 V battery, type AAA) in the direction indicated in the device case.
- Reinstall the switch cover using the reverse sequence.
Turn to the ON position. When are you going to use the device?- Turn to the OFF position when not in use.
TAKING CARE OF THE NATURAL ENVIRONMENT AND CLEANLINESS.
- The product and its components are not harmful to the environment
Please dispose of the package elements separately in containers for the corresponding material.- Please dispose of the broken product separately in containers for out-of-use electrical equipment.
Documents / Resources
 |
UltraLux VD70 Voltage Detector [pdf] User Manual VD70 Voltage Detector, VD70, Voltage Detector, Detector |