ULTIMEA Aura A40 Soundbar With App Control

ACCESSORIES LIST

SOUNDBAR CONTROLS

Control Panel

1. ““: Power Button
   Press to power on / standby.
2. ““: Source
   Press to switch source: OPT(OPTICAL)-BT-AUX-USB.
3. “ “: Bluetooth
   Press to switch to the BT channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and choose to connect to a new device manually on your mobile phone / PC / TV (BT ID: Aura A40).
4. ““: Volume Down
5. “ “: Volume Up

Remote Control

1. “ “: POWER BUTTON
   Press to power on / standby.
2. ““: LED DIMMER
   Press to adjust display brightness in 5 levels. Press and hold for 3s to turn off
3. ““: SOURCE
   Press to switch source: OPT-BT-AUX-USB
4. ““: OPT
   Press to switch to the OPTICAL source.
5. ““: AUX
   Press to switch to AUX source.
6. “ “: ВТ
   Press to switch to BLUETOOTH source.
7. ““: USB
   Press to switch to the USB source.
8. ““: EQ RESET
   Press to restore EQ to default settings.
9. “ “: USB REPEAT
   USB Mode: Press to switch between single loop playback and list loop playback.
10. “+”: VOLUME UP
11. “_”: VOLUME DOWN
12. “<“: PREVIOUS
    For BT and USB mode only: Skip to the previous track.
13. “>”: NEXT
    For BT and USB mode only: Skip to the next track.
14. ““: PLAY / PAUSE
    For BT and USB mode only.
15. “ “: MUTE
16. ““: DEVICE RESET
    Press for 5 seconds to initialize the device.
17. ” BASS “: BASSMAX
    Press to adjust the bass level, and the display will show: “B5-6” “B5-5”, “B5-4”, “В5-3”, “B5-2”, “B5- 1”, “B5 0”, “B5 I” “B5 2”, “B5 3”, “B5 4”, “В5 5”, “В5 6”.
18. “MIDRANGE”: MIDRANGE
    Press to adjust alto level, the display will show: “MR-6”, “MR-5”, “MR-4”, “MR-3”, “MR-2”, “MR-1”, “MR-0”, “MR-1”, “MR-2”, “MR-3”, “MR-4”, “MR-5”, “MR-6”.
19. “TREBLE “: TREBLE
    Press to adjust the treble level, and the display will show: “ТВ-Б”, “ТВ-5”, “ТВ-4”, “ТВ-3” “ТВ-2”, “ТВ-1”, “ТВ 0”, “ТВ 1” “TB 2”, “В 3”, “ТВ Ч”, “ТВ 5”, “ТВ 6”
20. ““: MOVIE
    Press to switch to MOVIE mode, the display will show: “MOVI”
21. ““: MUSIC
    Press to switch to MUSIC mode, the display will show: “MUSE”
22. ““: VOICE
    Press to switch to VOICE mode, and the display will show: “VOI[“
23. ““: SPORT
    Press to switch to SPORT mode, and the display will show: “5PRT”
24. ““: GAME
    Press to switch to GAME mode, and the display will show: “GAME”.
25. ““: NIGHT
    Press to switch to NIGHT mode, and the display will show: “NIGT “.
26. “SURROUND“: SURROUND
    Press to adjust surround sound level, the display will show: “5R-6”, “5R-5”, “5R-4”, “5R-3”, “5R-2”, “5R – 1”, “5R 0”, “5R 1”, “5R 2” “5R 3”, “5R 4”, “5R 5”, “5R 6”.
27. “PROMPT TONE”: PROMPT TONE
    Press to adjust prompt tone level, the display will show: “PT O”, “PT 1”, “РТ 2”, “РТ3”.

CONNECT TO TV VIA OPTICAL/AUX

1. Make sure the TV’s port is OPTICAL OUT, and connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
2. Make sure the optical plug is inserted correctly as shown in the picture. Do not insert the plug upside down and break the optical.
   Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume.

1. Connect the 3.5mm to RCA audio cable (Not included) to connect to your TV’s RCA AUDIO OUT port.
2. Make sure the color of the cable ends matches the color of the TV ports.
   Note: Please remember to unplug the AUX cable from the TV and Soundbar when you want to switch to another mode.

In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

CONNECT TO BLUETOOTH

1. Press the “” button on the soundbar or remote control to enter Bluetooth pairing mode.
2. Open your phone’s Bluetooth settings, find and select “Aura A40” to connect the soundbar.

Note:
If it’s already in Bluetooth mode and connected, press and hold the” ” button for 3 seconds to disconnect the current device and connect to the new device manually on your mobile phone / PC / TV.

CONNECT SUBWOOFER TO SOUNDBAR

• The subwoofer and Soundbar are connected via a wired connection.
• Simply connect the wire from the back of the subwoofer to the SUB OUT port on the Soundbar.

CONNECT SURROUND SPEAKER TO SOUNDBAR

• The front surround speaker is connected to the Soundbar via a wired connection. Use the front surround cable (FR & FL) to connect the front surround to the Soundbar.
• Connect the rear left surround speaker and rear right surround speaker with the rear surround cable, and connect the rear right surround speaker to the power supply. When the Soundbar is powered on, the surround speakers will automatically pair with the Soundbar. When the indicator light on the rear right surround speaker is steady, it indicates successful pairing.
• Manual pairing: Press and hold the Surround button on the remote control for 5 seconds. The display screen will show “SUR” and flash. Press and hold the Pair button on the right surround for 5 seconds. The indicator light will flash quickly. After successful pairing, the indicator light will remain steady.

PLACEMENT RECOMMENDATION

For a better listening experience, lay out the entire system as shown in the picture above.

WALL MOUNT INSTALLATION

Note:
The wall mount bracket used for the surround speakers is identical to that of the soundbar, so the vertical hole spacing is the same as that of the soundbar, and the installation method is also the same.

SPECIFICATIONS

WE ARE READY TO HELP

• support@ultimea.com
• support.ultimea.com.

Scan code to download the app

You can also search for “ULTIMEA” on Google Play or Apple Store to download the app.

• @ultimea_official
• +1 888-598-8875 (US) Mon-Fri 9 am-5 pm (PST)
• +49 89-628-25828 (EU) Mon-Fri 9am-5pm (CET)

Documents / Resources

ULTIMEA Aura A40 Soundbar With App Control [pdf] User Manual Aura A40 Soundbar With App Control, Aura A40, Soundbar With App Control, With App Control, App Control, Control

References

• User Manual