Philips 3-in-1 Wireless Charger with Qi2 and MagSafe

1. Вступ

Thank you for choosing the Philips 3-in-1 Wireless Charger (Model DLK3548Q). This device is designed to efficiently charge your Qi2-compatible smartphone, Apple Watch, and wireless earbuds simultaneously. Its foldable design and adjustable viewing angles make it a versatile charging solution for home, office, or travel.

2. Вміст упаковки

• Philips 3-in-1 Wireless Charger (DLK3548Q)
• Зарядний кабель USB-C
• Посібник користувача

3. Налаштування

1. Розгорніть зарядний пристрій: Gently unfold the charging stand to your desired angle. The stand can be adjusted from 0 to 65 degrees for optimal viewінж.
2. Підключіть живлення: Connect the provided USB-C cable to the charger's USB-C port and plug the other end into a compatible power adapter (not included). For optimal performance and 15W fast charging, use a power adapter that supports sufficient power output (e.g., a PD 20W or higher adapter).
3. Розміщення: Розмістіть зарядний пристрій на стійкій, рівній поверхні.

4. Інструкція з експлуатації

The Philips 3-in-1 Wireless Charger allows you to charge up to three devices simultaneously:

• Smartphone Charging (Up to 15W): Place your Qi2-compatible smartphone on the magnetic charging pad. The strong magnets will align your phone for efficient charging. The phone can be placed vertically or horizontally.
• Smartwatch Charging (Up to 2.5W): Place your Apple Watch on the dedicated smartwatch charging module.
• Earbuds Charging (Up to 5W): Place your wireless earbuds case (with wireless charging capability) on the base charging pad.

An LED indicator on the base will show the charging status:

• Постійне синє світло: Normal charging operation.
• Миготливе синє світло: Input power is insufficient, or a foreign object is detected. Ensure your power adapter meets the recommended specifications.

5. Технічне обслуговування

• Прибирання: Від’єднайте зарядний пристрій від мережі перед чищенням. Використовуйте м’яку суху тканину для протирання поверхні. Не використовуйте абразивні засоби для чищення або розчинники.
• Розсіювання тепла: The charger features heat dissipation vents to maintain optimal performance. Ensure these vents are not blocked during use.
• Протиковзкі накладки: The base is equipped with anti-slip pads for stability. Keep them clean to ensure proper grip.

6. Вирішення проблем

• Пристрій не заряджається:
  • Ensure the charger is properly connected to a power source with sufficient output (e.g., 20W PD adapter).
  • Check if the LED indicator is solid blue. If it's blinking, the power input might be insufficient or a foreign object is present.
  • Remove any thick phone cases or metal attachments that might interfere with wireless charging. For non-MagSafe compatible phones, use a MagSafe case or metal ring.
  • Ensure your device is Qi2 compatible for smartphone charging, and has wireless charging capability for earbuds.
• Слабкий магнітний зв'язок:
  • If your phone with a case does not adhere strongly, consider using a MagSafe-compatible case or a metal ring for better magnetic attachment.
• Повільна зарядка:
  • Verify that your power adapter provides adequate power (e.g., 20W or higher for 15W fast charging).
  • Ensure your device is correctly aligned on the charging pad.

7. Технічні характеристики

8. Гарантія та підтримка

This Philips product is covered by a manufacturer's warranty. For detailed warranty information, product support, or technical assistance, please refer to the warranty card included in your package or visit the official Philips support webсайт. Зберігайте чек про покупку як підтвердження покупки.

For further inquiries, you may contact Philips customer service through their official channels.