MOUNTUP Ultrawide Single Monitor Arm Instruction Manual

1. Вступ

Thank you for choosing the MOUNTUP Ultrawide Single Monitor Arm, Model MU7007. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.

2. Інформація про безпеку

Будь ласка, дотримуйтесь наступних запобіжних заходів під час встановлення та використання:

• Не перевищуйте максимальну вантажопідйомність 15 кг (33 фунтів).
• Ensure your monitor's VESA pattern is compatible (75x75mm or 100x100mm).
• Verify that your desk surface is strong enough to support the combined weight of the monitor arm and your monitor.
• Always use the provided hardware and follow installation steps carefully.
• Тримайте дітей і домашніх тварин подалі під час встановлення.
• Adjust the gas spring tension only when the arm is in a horizontal position to prevent sudden movement.

3. Вміст упаковки

Будь ласка, перевірте наявність та цілісність усіх компонентів:

• Збірка кронштейна монітора
• Знімна пластина VESA
• C-Clamp База
• Grommet Base (Optional)
• Комплект монтажних елементів (гвинти, шайби, проставки)
• Аллен Ключі
• Інструкція з експлуатації

Image: All components of the MOUNTUP Ultrawide Single Monitor Arm, showing the main arm, the C-clamp mounting option, and the grommet mounting option.

4. Технічні характеристики

Image: The monitor arm supporting an ultrawide screen, highlighting its compatibility with screens up to 40 inches and a weight capacity of 30.9 lbs.

5. Налаштування та встановлення

The MOUNTUP monitor arm offers two installation methods: C-Clamp та кріплення Grommet.

5.1. Виберіть спосіб кріплення

Determine which mounting method is suitable for your desk. The C-clamp is drill-free, while the grommet mount requires a hole in your desk.

5.2. C-Clamp монтаж

1. Приєднайте C-clamp до нижньої частини головного стовпа.
2. Place the monitor arm assembly onto your desk edge.
3. Затягніть C-clamp screw until the arm is securely fastened to the desk.

5.3. Grommet Mount Installation (Optional)

1. If your desk has a grommet hole, or you plan to drill one, attach the grommet base plate to the bottom of the main pole.
2. Вставте стовп через отвір для люверса.
3. Secure the base from underneath the desk using the provided hardware.

5.4. Підключення монітора

1. Attach the detachable VESA plate to the back of your monitor using the appropriate VESA screws and spacers from the hardware kit. Ensure the screws are tightened securely.
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head until it clicks into place.
3. Tighten the security screw on the VESA head to prevent accidental detachment.

Image: A woman demonstrating the easy installation process, attaching a monitor to the arm using the detachable VESA plate, indicating setup can be completed within 15 minutes.

6. Експлуатація та регулювання

The MOUNTUP monitor arm offers extensive adjustability for optimal ergonomic positioning.

6.1. Регулювання натягу газової пружини

The gas spring tension needs to be adjusted to match your monitor's weight. If the monitor rises too easily or drops, adjust the tension:

• Підняття монітора: Turn the adjustment screw (located on the arm joint) clockwise (towards the "-" direction) to reduce tension for lighter monitors.
• Монітор опускається вниз: Turn the adjustment screw counter-clockwise (towards the "+" direction) to increase tension for heavier monitors.
• Важливо: Hold the arm in a horizontal position during adjustment to prevent sudden movement.

6.2. Регулювання висоти

Once the gas spring tension is correctly set, you can freely move the monitor up and down to your desired height. The arm allows for a height adjustment range of 13 inches, with a minimum height of 6.7 inches and a maximum height of 19.7 inches from the desk surface.

6.3. Регулювання кута нахилу

To adjust the monitor's tilt angle:

1. Loosen the tilting bolt (turn towards the "-" direction) on the VESA head.
2. Відрегулюйте кут нахилу монітора на потрібний вам рівень (від +90° до -45°).
3. Retighten the tilting bolt (turn towards the "+" direction) to secure the angle.

6.4. Swivel and Rotation

• Поворотний: The arm joints allow for 180° swivel, and the VESA plate can swivel 360°, providing flexibility to share your screen or adjust viewкути.
• Обертання: The VESA plate supports 360° rotation, allowing you to switch your monitor between landscape and portrait orientations.

Image: Detailed instructions for adjusting the gas spring tension and the monitor's tilt angle using an Allen wrench.

Image: Visual representation of the monitor arm's full range of motion, including tilt (+90°/-45°), 360° swivel at arm joints, and 360° rotation for portrait/landscape viewінж.

Image: A diagram illustrating the free height adjustment capabilities, showing minimum height (6.7"), maximum height (19.7"), and maximum extension (22.6").

6.5. Кабельний менеджмент

The monitor arm features integrated cable management to keep your workspace tidy. Route your cables through the removable covers on the arm and the base. The base also includes two USB connectors for convenient access (USB cable not included).

Image: A visual guide demonstrating the routing of cables through the detachable USB connector integrated into the monitor arm's base, promoting a clutter-free desk.

7. Технічне обслуговування

Regular maintenance ensures the longevity and optimal performance of your monitor arm:

• Прибирання: Wipe the arm and base with a soft, damp тканина. Уникайте абразивних очищувачів.
• Перевірте підключення: Periodically check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
• Газова пружина: The gas spring is designed for long-term use (over 20,000 cycles) and generally requires no specific maintenance beyond initial tension adjustment.

8. Вирішення проблем

If you encounter issues with your MOUNTUP monitor arm, refer to the following common problems and solutions:

8.1. Monitor Sags or Does Not Hold Position

• Причина: Gas spring tension is too low for the monitor's weight.
• рішення: Increase the gas spring tension by turning the adjustment screw counter-clockwise (towards the "+" direction) as described in Section 6.1.

8.2. Monitor Floats Up or is Difficult to Push Down

• Причина: Gas spring tension is too high for the monitor's weight.
• рішення: Decrease the gas spring tension by turning the adjustment screw clockwise (towards the "-" direction) as described in Section 6.1.

8.3. Monitor Tilts Forward or Backward Unexpectedly

• Причина: The tilt angle bolt on the VESA head is loose.
• рішення: Retighten the tilt angle bolt as described in Section 6.3.

8.4. Arm Feels Loose or Unstable

• Причина: Письмовий стіл клamp or grommet mount is not sufficiently tightened.
• рішення: Recheck and tighten the C-clamp or grommet mounting hardware securely.

9. Гарантія та підтримка

MOUNTUP stands behind the quality and durability of its products. This monitor arm comes with a 3-year support period, ensuring its strength and reliability.

For further assistance, technical support, or warranty claims, please contact MOUNTUP customer service through the retailer where you purchased the product or visit the official MOUNTUP webсайт для контактної інформації.