Electro-Harmonix NEOCLONE

Electro-Harmonix Neo Clone Analog Chorus Pedal User Manual

Model: NEOCLONE

вступ

The Electro-Harmonix Neo Clone is an analog chorus pedal designed to deliver the classic Small Clone sound in a compact, pedalboard-friendly enclosure. It utilizes a high-quality bucket brigade chip for its true analog design, providing a rich and lush sonic texture.

особливості

  • Compact, pedalboard-friendly footprint.
  • Total analog design using a high-quality bucket brigade chip.
  • Sultry sonic texture with depth control.
  • Operates on a 9V battery (included) or optional 9V power adapter.

Налаштування

Потужність педалі

The Neo Clone can be powered by a 9V battery or an optional 9V DC power adapter. A 9V battery is included with the pedal. To install or replace the battery, remove the four screws on the bottom plate of the pedal. Connect the battery to the battery clip inside the pedal and replace the bottom plate.

For external power, use a 9V DC power adapter with a center-negative plug. The power jack is located at the top of the pedal.

Підключення педалі

  1. Підключіть свій інструмент (наприклад, гітару) до ВХІД гніздо з правого боку педалі за допомогою стандартного інструментального кабелю 1/4 дюйма.
  2. Підключіть AMP (OUTPUT) jack on the left side of the pedal to your amplifier or the next effect pedal in your signal chain using a standard 1/4-inch instrument cable.
  3. If using an external power adapter, plug it into the 9V DC jack.

The Neo Clone is typically placed early in the signal chain, often before distortion or overdrive pedals, to achieve a classic chorus sound.

Управління педаллю

The Neo Clone features simple controls for intuitive operation:

Елементи керування

  • Ручка RATE: This knob controls the speed of the chorus effect. Turning it clockwise increases the modulation speed, while turning it counter-clockwise decreases it.
  • DEPTH Switch: This toggle switch selects between two different depth settings for the chorus effect. The "up" position provides a deeper, more pronounced chorus, while the "down" position offers a more subtle effect.
  • Ножний перемикач: Engages or bypasses the chorus effect. The red LED illuminates when the effect is active.

Основне використання

To activate the chorus effect, press the footswitch. The red LED will light up. To bypass the effect, press the footswitch again. Experiment with the RATE knob and DEPTH switch to find your desired chorus sound. Lower rate settings with higher depth can create lush, swirling textures, while higher rate settings can produce more vibrato-like or rotary speaker effects.

Electro-Harmonix Neo Clone Analog Chorus Pedal

Image: The Electro-Harmonix Neo Clone pedal, showing its Rate knob, Depth switch, and footswitch. Input and Amp (Output) jacks are visible on the sides.

Демонстраційні відео

Electro-Harmonix - Neo Clone - Demo

Video: A demonstration of the Electro-Harmonix Neo Clone pedal, showcasing various settings and their resulting sounds. The video highlights the pedal's versatility in creating different chorus effects.

Electro-Harmonix Neo Clone Analog Chorus

Video: An official demonstration of the Electro-Harmonix Neo Clone Analog Chorus pedal, illustrating its sound capabilities and control functions.

Технічне обслуговування

  • Keep the pedal clean and free from dust. Use a soft, dry cloth for cleaning.
  • Уникайте впливу екстремальних температур, вологості або прямих сонячних променів на педаль.
  • When not in use for extended periods, remove the battery to prevent leakage and damage.
  • Ensure all cable connections are secure to prevent signal loss or intermittent operation.

Усунення несправностей

No Sound or Weak Signal

  • Check all cable connections to ensure they are securely plugged into the correct input/output jacks.
  • Verify the power supply. If using a battery, ensure it is fresh and correctly installed. If using an adapter, confirm it is the correct voltage (9V DC) and polarity (center-negative).
  • Test the pedal with a different instrument cable or ampвипарник, щоб виключити проблеми із зовнішнім обладнанням.

"Pop" Sound When Engaging Effect

Some true bypass pedals, including the Neo Clone, may produce a slight "pop" sound when engaged. This is often a characteristic of the true bypass switching mechanism and typically does not indicate a malfunction. If the pop is excessively loud, ensure proper grounding of your equipment and try engaging the pedal when not actively playing.

Технічні характеристики

ОсобливістьДеталь
Вага товару0.8 унції
Розміри продукту3.45 x 0.65 x 2.75 дюймів
Номер моделі товаруNEOCLONE
АкумуляториПотрібна 1 батарея 9 В (у комплекті)
Тип роз'ємуАудіороз'єм 1/4 дюйма (6.35 мм)
Апаратний інтерфейс1/4-дюймовий аудіо
Формат сигналуАналоговий
Тип матеріалуПластик, Метал
Джерело живленняПрацює від батареї
томtage9 вольт

Гарантія та підтримка

Electro-Harmonix products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Electro-Harmonix webсайт або зверніться безпосередньо до служби підтримки клієнтів. Зберігайте чек про покупку як підтвердження покупки для гарантійних претензій.

Пов'язані документи - NEOCLONE

попередньоview Electro-Harmonix Nano Clone Full Chorus Guitar Pedal User Manual
Official user manual for the Electro-Harmonix Nano Clone Full Chorus guitar effects pedal. Learn about operation, power, battery replacement, warranty, and FCC compliance.
попередньоview Педаль ефектів для гітари Electro-Harmonix Small Clone Full Chorus - інструкція з експлуатації та гарантійна інформація
Детальна інструкція з експлуатації, інформація про гарантію та контактні дані для педалі ефектів для гітари Electro-Harmonix Small Clone Full Chorus. Дізнайтеся, як користуватися регуляторами DEPTH та RATE, увімкнути пристрій, а також зрозуміти гарантійне покриття та процес повернення.
попередньоview Інструкція користувача аналогового модулятора Electro-Harmonix Good Vibes
Посібник користувача для гітарної педалі Electro-Harmonix Good Vibes Analog Modulator, у якому детально описано її функції, елементи керування, експлуатацію, гарантійну інформацію та відповідність вимогам FCC.
попередньоview Інструкція з використання аналогової модуляційної педалі Electro-Harmonix The Worm
Інструкція користувача для педалі аналогової модуляції Electro-Harmonix The Worm, у якій детально описано її функції, елементи керування, підключення, гарантійну інформацію та відповідність вимогам FCC.
попередньоview Інструкція з використання аналогової затримки Electro-Harmonix Deluxe Memory Boy Tap Tempo
Інструкція користувача для педалі затримки Electro-Harmonix Deluxe Memory Boy (DXMB) Tap Tempo Analog з детальним описом її елементів керування, функцій та роботи.
попередньоview Electro-Harmonix Blurst Modulated Filter User Manual
User manual for the Electro-Harmonix Blurst, an analog low pass filter pedal with internal LFO modulation, expression pedal control, and adjustable resonance, blend, and volume. Includes setup, controls, warranty, and FCC compliance information.