Інструкція з експлуатації кріплення акумулятора Blade 120SR

вступ

This manual provides essential instructions for the installation, operation, and maintenance of your Blade 120SR Battery Mount (Part Number BLH3123). Please read this manual thoroughly before proceeding with any procedures to ensure proper function and longevity of the component.

Техніка безпеки

• Always disconnect the battery from the aircraft before performing any installation or maintenance.
• Use appropriate tools to avoid damaging the component or surrounding parts.
• Тримайте дрібні деталі подалі від дітей.

Вміст упаковки

• 1x Blade 120SR Battery Mount (BLH3123)
• (Additional fasteners or components may be included depending on the specific kit)

Налаштування та встановлення

This section details the steps required to install the Blade 120SR Battery Mount onto your aircraft.

1. Приготування: Ensure the aircraft's power is off and the battery is disconnected. Place the aircraft on a stable, clean surface.
2. Remove Old Mount (if applicable): Carefully unscrew and remove the existing battery mount from the aircraft chassis. Note the orientation and attachment points.
3. Position New Mount: Align the new Blade 120SR Battery Mount (BLH3123) with the designated mounting points on the aircraft frame. Ensure the orientation matches the original component.
4. Безпечне кріплення: Using the appropriate small screws (typically M1 or M2, not included with mount unless specified), gently secure the battery mount to the chassis. Do not overtighten screws, as this can strip the plastic or threads.
5. Перевірте встановлення: Gently tug on the installed mount to ensure it is firmly attached and does not wobble.

Image: The Blade 120SR Battery Mount (BLH3123) showing its structure and mounting points. This component is designed to securely hold the battery in place on the Blade 120SR helicopter.

Інструкція з експлуатації

Once the battery mount is installed, follow these steps to properly secure and use your battery.

1. Вставте батарею: Slide the compatible battery into the designated slot on the battery mount. Ensure it fits snugly without excessive force.
2. Безпечний акумулятор: If your aircraft model includes a battery strap or clip, use it to further secure the battery in the mount. This prevents movement during flight.
3. Підключіть акумулятор: Connect the battery's power lead to the aircraft's power connector.
4. Передпольотна перевірка: Before flight, always perform a visual inspection to confirm the battery is securely seated and the mount is intact.

Технічне обслуговування

Regular inspection and maintenance will help prolong the life of your battery mount.

• Візуальний огляд: Periodically inspect the battery mount for any signs of cracks, stress marks, or deformation, especially after hard landings or impacts.
• Прибирання: If necessary, gently clean the mount with a soft, dry cloth to remove dust or debris. Avoid using harsh chemicals.
• Перевірка кріплення: Ensure all screws securing the mount are tight. Retighten if loose, but do not overtighten.
• Заміна: If the mount shows significant wear, damage, or no longer holds the battery securely, replace it immediately with a genuine Blade BLH3123 part.

Усунення несправностей

Технічні характеристики

• модель: BLH3123
• Бренд: Лезо
• Виробник: Horizon Hobby
• Розміри продукту: 3 x 2 x 0.66 дюйми (7.62 x 5.08 x 1.68 см)
• Вага товару: 0.16 унцій (4.54 грам)
• Рекомендований вік: 14 років і старше
• ASIN: B003TRNTCW

Гарантія та підтримка

For warranty information or technical support regarding your Blade 120SR Battery Mount, please contact Horizon Hobby directly. Refer to the official Horizon Hobby website or your product packaging for the most current contact details and warranty terms.

Виробник: Horizon Hobby

Webсайт: www.horizonhobby.com