1. Продукт закінчивсяview
The Schlage SP455A3 Kick Down Door Holder is designed to provide a simple and effective method for holding doors open. Constructed from cast aluminum with a bright brass finish, it features a 4-inch arm and a durable rubber foot for secure engagement with the floor surface. This unit is activated and released with a touch of the foot, offering convenient operation.
Figure 1: Schlage SP455A3 Kick Down Door Holder. This image displays the door holder with its 4-inch arm and rubber foot, presented in a bright brass finish.
Ключові характеристики:
- Проста операція: Engage and release the door holder with a foot.
- Міцна конструкція: Made from cast aluminum for longevity.
- Безпечне утримання: Features a rubber bottom to prevent slipping.
- Optimal Clearance: Designed for doors with a door-to-floor clearance of 2 inches or less.
- Завершення: Bright Brass.
2. Вміст упаковки
Перед початком встановлення перевірте наявність усіх компонентів.
- Schlage SP455A3 Kick Down Door Holder (1 unit)
- Кріпильні елементи (гвинти)
3. Інструкції зі встановлення
This door holder is designed for door mount installation. Ensure the door-to-floor clearance is 2 inches or less for proper function.
Необхідні інструменти:
- Олівець
- Мірна стрічка
- Drill with appropriate drill bit (for pilot holes)
- Викрутка (рекомендується хрестова)
Кроки встановлення:
- Визначте місце монтажу: Position the door holder on the lower edge of the door, ensuring it is within reach for foot operation and that the rubber foot will make firm contact with the floor when engaged. The ideal location allows the door to open to the desired angle.
- Перевірте зазор: With the door holder temporarily held in place, ensure that the distance from the bottom of the door to the floor is 2 inches or less. This ensures the rubber foot can effectively engage the floor.
- Позначте отвори для гвинтів: Using a pencil, mark the locations for the mounting screws through the pre-drilled holes on the door holder base.
- Просвердліть пілотні отвори: Carefully drill pilot holes at the marked locations. Use a drill bit slightly smaller than the screw diameter to prevent wood splitting.
- Attach Door Holder: Align the door holder with the pilot holes and secure it firmly to the door using the provided mounting screws and a screwdriver. Do not overtighten.
- Тестова операція: Once installed, test the door holder by pushing down on the arm with your foot to engage it and lifting it to release.
4. Інструкція з експлуатації
The Schlage SP455A3 Kick Down Door Holder is designed for simple, foot-activated use.
- Для участі: With your foot, gently press down on the top of the door holder's arm until the rubber foot makes firm contact with the floor and the door is held in place.
- Звільнити: With your foot, gently lift the arm of the door holder upwards. The rubber foot will disengage from the floor, allowing the door to move freely.
5. Технічне обслуговування
Regular maintenance ensures optimal performance and extends the life of your door holder.
- Прибирання: Wipe the metal components with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners that may damage the finish.
- Rubber Foot Inspection: Periodically check the rubber foot for wear or damage. A worn rubber foot may reduce the holder's ability to grip the floor. Replacement rubber tips may be available from the manufacturer.
- Затягніть гвинти: If the door holder becomes loose, gently tighten the mounting screws. Do not overtighten.
6. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| Door holder does not hold the door securely. |
|
|
| Door holder feels loose on the door. | Монтажні гвинти ослаблені. | Tighten mounting screws with a screwdriver. |
7. Технічні характеристики
| Атрибут | Деталь |
|---|---|
| Бренд | ШЛАЖ |
| Номер моделі | 455A3 |
| Тип монтажу | Кріплення на двері |
| матеріал | Aluminum, Brass, Rubber |
| Колір/Покриття | Яскрава латунь |
| Arm Length / Size | 4 inches (4 in H) |
| Door-to-Floor Clearance | 2 дюймів або менше |
| Вага товару | 2.4 унції |
| Розміри продукту | 9.43 x 4.26 x 5.95 дюймів |
| Включені компоненти | Door holder, Mounting Hardware |
| Потрібні батареї | немає |
8. Гарантія та підтримка
For specific warranty information, please refer to the documentation included with your product or visit the official SCHLAGE website. SCHLAGE products are backed by a commitment to quality and durability.
If you require technical assistance or have questions regarding your Schlage SP455A3 Kick Down Door Holder, please contact SCHLAGE customer support. Contact details are typically available on the manufacturer's webсайт або упаковка продукту.