UGREEN-HiTune-T3-90401-Active-Noise Cancelling Wireless Earbuds
Introduction
HiTune T3 Bluetooth earbuds offer punchy and boosted bass with high-resolution treble and a wider soundstage thanks to their large 10mm PU+biological composite driver unit. UGREEN HiTune T3 wireless noise-canceling earbuds have cutting-edge Active Noise Canceling (ANC) technology that dynamically blocks out unwanted outside noise. With fewer distractions, listen to your music while working out or during your commute to help you concentrate better. HiTune T3 Bluetooth headphones feature an AI algorithm for superior background noise reduction and vocal enhancement to make sure you can be clearly heard wherever you are.
With 4 pairs of ear tips, the noise-canceling Bluetooth earbuds provide greater wearing stability and comfort, making them perfect for daily commutes and workouts. Instant connection when the case is open, and the charging case extends the playback time to up to 24 hours. You can enjoy the HiTune T3 wireless noise-canceling earbuds all day long.
WHAT’S IN THE BOX
CHARGING
For first time use, charge the charging case with earbuds inside with a 5V/1A USB adapter.
WEAR AND ADJUST
T3 includes four sizes of ear tips and small tips were pre-installed as the default. Please pick the right size for the perfect fit.
POWERING ON/Off
- Power On
- Open the case to turn on earbuds.
- Power Off
- Put earbuds back and close the case.
BLUETOOTH PAIRING WITH YOUR DEVICE
Open the case and earbuds will enter pairing mode, find and connect “UGREEN HiTune T3” on your Bluetooth list.
PAIRING WITH ANOTHER BLUETOOTH DEVICE
Open the case (earbuds inside), press & hold reset button for 3s until No.1 and 3 indicators blink 3 times simultaneously.
FIX BLUETOOTH PAIRING OR CONNECTION PROBLEMS
Open the case (earbuds inside), press & hold reset button for 10s until 3 white indicators of the case breathe for 2s, indicating that the earbuds have been reset successfully.
MUSIC CONTROL
SPECIFICATIONS
| Product Name | HiTune T3 Active Noise-Cancelling Wireless Earbuds |
| Model | WS106 |
| Bluetooth Version | Bluetooth 5.2 |
| Bluetooth Profiles | HFP, AVRCP, A2DP |
| Bluetooth Frequency | 2400MHz-2483.5MHz |
| Bluetooth Range | 10 m/32.8 ft. |
| Codecs | AAC, SBC |
| Frequency Response | 20Hz-20kHz |
| Charging Case Battery | Li-Po |
| Charging Case Input | 5V 320mA |
| Charging Case Output | 5V 100mA |
| Charging Port | USB-C |
| Charge Earbuds | 1.5 hours |
| Charge Charging Case | 2 hours |
FAQs
There are four pairs of ear-tips (XS/S/M/L) included with the HiTune T3 earbuds, you could change the different sizes of Ear-Tips to find the ones that most fit your ears.
Yes, the Hitune T3 active noise canceling earbuds supports touch control. Please refer to the attached video to know more details.
I don’t believe so. The phone has to approve the pairing too.
It sounds like an internal wire connection to me. I don’t think it is BT related. Well worth trying to get a replacement.
yes, nice quality.
The charging port on the charging case of the Hitune T3 active noise canceling earbuds is a USB C port.
No, we do not sell key chains for the HiTune T3 earbuds in our store.
You can press and hold the right earbud for 2 seconds for switching to the ANC mode.
The Hitune T3 wireless earbuds are made in China.
Generally, there are four pairs of eartips included in the package of the HiTune T3 earbuds, including XS/S/M/L types.
any standard phone charger will work.
Below are some specifications of the HiTune T3 Active Noise Cancelling Earbuds.
• Mic/speaker Sensitivity Rate: -38db ±3/103±3db
• Audio/ Mic Sample Rate: (24Bit/48kHz)/(8Bit/8Khz)
• Output: 3mW ±0.5mW
• SNR: ≥90dB
The HiTune T3 Wireless Earbuds comply with IPX5 waterproof standard.
You can adjust the volume of the Hitune T3 wireless earbuds on your phone after they are paired with your phone.
I don’t think so.
