UBIBOT UB-SP-A1 Wifi Temperature Sensor
Introduction
This product converts solar radiation into electrical energy directly through the photoelectric or photochemical effect by absorbing sunlight. When used in conjunction with our GS1/GS2 series devices, it can charge the equipment in outdoor environments with sunlight exposure. This reduces the complexity of external deployment, promotes environmental sustainability, and saves energy and electricity.
Applications
It is widely used in flower gardens, farms and other outdoor locations.
Features
- IP67（back glue treatment）
- Anti-drop aluminum frame
- Plug and Play
- DC5521 Interface
- Use with GS1 for a variety of outdoor scenarios
Specification
| Specification | |
| Product Model | UB-SP-A1 |
| Material | aluminum frame + polycrystalline glass |
| Cable Length | 5m |
| Dimensions | 340*240*17MM ±0.5 |
| Standard Output Power (@STC) | bare board 10W（-5%，+10%） |
| Open Circuit Voltage (@STC) | 6V（-5%，+10%） |
| Standard Workting Voltage(@STC) | 5V（-5%，+10%） |
| Standard Working Current (@STC) | 2A（-5%，+10%） |
| Short Circuit Current (@STC) | 2.1A（-5%，+10%） |
| Cell Conversion Efficiency（%） | 18.5% |
NOTE
- This product cannot come into contact with strong corrosive substances.
- Avoid scratching or hitting the surface of the solar panel with hard objects during use.
- Solar panels cannot withstand bending stress during transportation and assembly. Do not place sensors directly in high-temperature environments.
Product Usage Instructions
- Avoid Contact with Corrosive Substances: Do not expose the product to strong corrosive substances.
- Avoid Surface Damage: Do not scratch or hit the surface of the solar panel with hard objects during use.
- Avoid Bending Stress: Solar panels cannot withstand bending stress during transportation and assembly.
- Avoid High-Temperature Environments: Do not place sensors directly in high-temperature environments.
Frequently Asked Questions
Q: Can this product be used indoors?
A: No, this product is designed for outdoor use where it can absorb sunlight to generate electrical energy.
Q: What devices can I use this product with?
A: This product is designed to be used with our GS1/GS2 series devices for charging in outdoor environments.
Q: How do I clean the solar panel?
A: Use a soft, damp cloth to gently wipe the surface of the solar panel to remove any dirt or debris. Do not use abrasive cleaners.
Documents / Resources
 |
UBIBOT UB-SP-A1 Wifi Temperature Sensor [pdf] User Guide UB-SP-A1 Wifi Temperature Sensor, UB-SP-A1, Wifi Temperature Sensor, Temperature Sensor, Sensor |