UBIBOT UB-DT-P1 Temperature Sensor
Specifications
| Specification | |
| Model | UB-DT-P1 |
| Power Supply | DC 3 ~ 5.5V |
| Measurement Range | -55 ~ 125℃ |
| Measurement Accuracy | ±0.5℃ (@-55 ~ 125℃) |
| Material | Stainless steel |
| Dimensions | Φ6mm * 31mm |
| Cable Length | 3m / 5m / Custom-made |
| Connector | Micro USB / Audio / Custom-made |
| Internal Chip | American DALLAS DS18B20 |
| Protocol | Single Bus protocol |
| Ingress Protection | IP68 |
| Thunder Prevention | Level 1 |
Product Usage Instructions
Introduction
UbiBot Temperature Sensor is an exquisitely compact, highly sensitive, fast-sensing, interference-resistant and highly accurate external temperature sensor for on-site temperature measurement in harsh environments.
Wiring Instructions
Connect the sensor to the designated port following the pin sequence and definitions below:
- Micro USB Connector:
- Pin 1: GND
- Pin 5: VCC
- Audio Connector:
- L: VCC
- M: Data
- G: GND
Product Working Environment
This product is suitable for indoor and outdoor environments. The recommended operation temperature is -55 ~ 125℃.
Product Applications
This product is suitable for temperature monitoring in these industries: refrigerated trucks, pharmaceutical factories, GMP monitoring systems, teleco and airport monitoring, beer manufacturers’ buildings, warehouse management, logistics, process temperature monitoring, air conditioning, incubation, animal breeding, greenhouses, freezers and other industries.
Frequently Asked Questions
Can the sensor be submerged in water?
Yes, the sensor has an IP68 rating which means it is dust-tight and can be immersed in water up to a specified depth.
What is the recommended power supply voltage for the sensor?
The sensor operates within a range of DC 3 to 5.5V.
Documents / Resources
 |
UBIBOT UB-DT-P1 Temperature Sensor [pdf] User Guide UB-DT-P1 Temperature Sensor, UB-DT-P1, Temperature Sensor, Sensor |