B7C Planetary Mixer
“
Product Information
Specifications:
- Model: Planetary Mixer 7 LITER B 7 C
- Capacity: 7 liters
- Power: 650 Watts
- Speed Control: Electronic 5-speed control
- Mixing Action: Planetary mixing action
- Safety Features: Safety guard with micro switch
Product Usage Instructions:
1. Installation
Location: Place the mixer on a stable
countertop with sufficient space around it for operation.
Electrical Connections: Ensure the mixer is
connected to the appropriate power source as specified on its
nameplate.
Installation Diagram: Refer to the user manual
for detailed installation instructions.
2. Operation
Controls: Familiarize yourself with the control
panel and the electronic 5-speed settings.
How to Install an Agitator: Ensure the bowl is
fully lowered, place the agitator in the bowl, push it up on the
agitator shaft, and turn it clockwise to secure it.
How to Install a Bowl: Lower the bowl support,
align the bowl in position ensuring proper placement in the bowl
retainer and front locating pin.
Attachment Use Guide: Follow guidelines for
using the dough arm, beater, and whip at recommended speeds for
various mixing tasks.
3. Maintenance
Important Note: Always disconnect the mixer
from electrical power before performing any maintenance work.
Frequently Asked Questions (FAQ):
1. What should I do if the mixer malfunctions?
If your mixer fails to operate, check if it is plugged in,
verify the fuse, and ensure the circuit breaker is closed. If
issues persist, contact your original seller for assistance.
2. How do I clean new mixer bowls and agitators?
New mixer bowls and attachments should be washed thoroughly with
hot water and mild soap solution, rinsed with either a mild soda or
vinegar solution before use.
“`
Planetary Mixer 7 LITER
B 7 C
TABLE OF CONTENT
1.Overview 1-1Safety Precautions 1-2Specifications
2.Installation 2-1 Location 2-2 Electrical Connections 2-3 Installation Diagram
3.Operation 3-1 Controls 3-2 How to install an agitator 3-3 How to install a bowl 3-4 Attachment use guide
4.Mixing Capacity
5.Maintenance
Page 2-3 3 4
5 5 5 6
7 7 8 8 8
9
10
5.MAINTENANCE NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER UNIT HAS BEEN DISCONNECTED FROM ELECTRICAL POWER AND GROUNDING.
. Never use a metal or stiff brush to clean the mixer. Never lean the mixer with a water hose or any fluid pressure. . The mixer should be thoroughly cleaned after using. . Bowls and agitators should be removed from the mixer and cleaned. . The transmission case and planetary gears are filled special grease that will last for several years. When grease is needed for replacement, it should be ordered from our authorized service representative. . If the attachment strikes bowl, stop the mixer. The original seller will help you to make adjustment.
If your mixer should malfunction or fail to operate, check the following. .Is the mixer plugged in? .Is the fuse in the circuit to the mixer in working order? If you have a circuit breaker box, be sure the circuit is closed. .If the problem is not due to one of the above items, please contact your original seller.
1
10
4.MIXING CAPACITY:
9
2
1. OVERVIEW
3-2 HOW TO INSTALL AN AGITATOR
-Our 7 liter mixer has a high 650 Watts power to allow mixing
To install an agitator, the bowl must be installed and fully lowered.
stiffer dough and larger batches.
Place the agitator in the bowl, push it up on the agitator shaft, and
-All metal body and counter-top style is designed professionally.
turn it clockwise to seat the shaft pin to the slot of the agitator shank.
-Its shafts are mounted in ball bearing and 100% steel gears drive. 3-3 HOT TO INSTALL A BOWL
-Electronic 5-speed control helps you to enjoy non-top shifting
The bowl must be installed before the agitator. To install the bowl,
speed.
fully lower the bowl support. Position the bowl so the alignment
-Planetary mixing action and digital timer ensures perfect results. bracket on the back of the bowl is in the bowl retainer and the
-Simple hand lift is good for changing bowl and attachments.
locating pin on the front of the bowl support fit in the holes on the
-When overloading, power off automatically to protect motor
sides of the bowl.
and electrical.
3-4 ATTACHMENT USE GUIDE
-Safety guard with micro switch
DOUGH ARM: it is frequently used for heavy
1-1 SAFETY PRECAUTIONS
bread dough, and preferable to be use at 1 speed.
When using this machine, always make sure the following conditions
or operations are in effect. Failure to this will may be the cause of
accidents.
.Keep hand & clothing away from bowl and attachments when in operation. .Keep rigid objects away from bowl and attachments when in operation. .To protect against risk of electrical shock, do not immerse mixer in water or other liquid.
BEATER: it is commonly used for thin batters, cake and mashing potatoes, like stuffing and preferable to be used at 2-3 speed.
.Use the machine only with the electrical service specified on its nameplate.
.Disconnect the machine from its power source before carrying out
any maintenance.
WHIP: it is best for shipping cream and beating
.Do not disable or remove the safety mechanisms included with the machine.
.Do not leave the machine in operation unattended.
eggs and preferable to be used at 4-5 speed.
.Observe maintenance and safety inspection schedules.
.Maximum bread dough capacity 1500 gram on basis of 60 percent water.3
8
3. OPERATION Note: New mixer bowls and agitators (beaters, whip, and dough hook) should be thoroughly washed with hot water and mild soap solution, rinsed with either a mild soda or vinegar
1-2 SPECIFICATIONS
Motor:
650 Watts powerful, ball bearing ventilated
within mixer enclosure.
Electrical:
208-240V/110-120V single phase
Switch & Timer: All in one digital control panel
solution, and thoroughly rinsed with clean water BEFORE being put into service. This cleaning procedure should also followed for bowls and agitators before whipping egg whites with or whole eggs.
Cord and Plug:
respectively consist of 3 wires which one wire is connected for grounding, other wires are connected to power supply.
3-1 CONTROLS All models are furnished
Transmission:
with a digital Timer and
electronic 5-speed
ON/OFF: to start or stop
operation Timer: digital set by
Speed:
1-30 minutes or non-timer service. Speed:
Safety Guard:
Speed 1 For slow beating, mashing and kneading yeast dough. Dimension:
Speed 2 For mixing cookie and cake batters.
Net Weight:
Speed 3 For beating , creaming and medium fast whipping. Standard:
Speed 4 For whipping heavy cream, egg whites and boiled
Attachment:
frostings.
Speed 5 For whipping small amounts of heavy cream and
egg whites.
7
The gears are constantly meshed in a special lubricant assuring long lift; transmission gears are of heat-treated alloy steel, high accurate construction. All bearing are ball bearings. The mixer have five positive speeds as 100 RPM-500RPM Smoothly rotate open with a micro switch to shut off power immediately to protect operator. 345x435x510mm 25kg Stainless steel bowl 1pc Mixing hook: 1pc Flat beater: 1pc Whipping ball: 1pc
4
2. INSTALLATION BEFORE INSTALL YOUR MIXER, CHECK TO BE SURE THAT YOUR ELECTRICAL SERVICE SPECIFICATIONS MATCH THOSE OF YOUR MIXER AS PRINTED ON THE MIXER’S NAMEPLATE.
2-1 LOCATION Place the mixer in its operating location. Bench should be placed on a sturdy level surface. There should be adequate space around the mixer for the user to operate the control and install and remover bowls.
2-2 ELECTRICAL CONNECTIONS
WARNING: THIS SUPPY CORD ON THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. IT IS IMPERATIVE THAT THE OUTLET TO WHICH THIS PLUG IS CONNECTED BE PROPERLY GROUNDED.
2-3 INSTALLATION DIAGRAM (MM)
5
6
Documents / Resources
 |
Twothousandco B7C Planetary Mixer [pdf] Installation Guide B7C Planetary Mixer, B7C, Planetary Mixer, Mixer |