Tuya Zigbee Smart Plug 16A UK Socket User Guide

Tuya Zigbee Smart Plug 16A UK Socket User Guide

Tuya Zigbee Smart Plug 16A UK Socket.jpg

 

Specifications

FIG 1 Specifications.JPG

 

LED State

FIG 2 LED State.JPG

 

Product Configuration

FIG 3 Product Configuration.JPG

 

Installation

  1. Plug the smart into a power cutlet.
  2. Add the smart to the app.
  3. Turn on the switch. (The socket can connect m to small appliances such as light fans, etc,)

FIG 4 Installation.JPG

 

Get Started

1. Download APP
Android; Download the “Smart life” app from Google Play,
IOS the ‘Smart Life” app from the App Store.

FIG 5 Download APP.JPG

 

2, Register and Login
Run APP, -register and log in the account (new users need to register, and existing accounts can enter email ard password to log in)

FIG 6 Register and Login.JPG

 

3. Add Device
(1) Add Tuya Ziggee Gateway
Add tuya Zig6ee controller first and operate  with the controller user manual.(Please notice  the wired and wirelss version controller)

FIG 7 Add Device.JPG

 

(2) Add Sub-devices
Before adding a device, ensure it is in pairing mode. To enter pairing mode, press and hold the reset button for seconds until the device  indicator light flashes.

FIG 8 Add Sub-devices.JPG

 

Main functions

Working status and record settings

1. APP main interface

FIG 9 APP main interface.JPG

 

2. Device Functions

(1)  function

1. Countdown on on/off

FIG 10 function.JPG

2. Time on/off

FIG 11 Time on off.JPG

 

3. Looping timing

FIG 12 Looping timing.JPG

 

 

4. Random Timing

FIG 13 Random Timing.JPG

 

5. Jog Switch

FIG 14 Jog Switch.JPG(2) Electricity Metering

FIG 15 Electricity Metering.JPG

3. Setup 

(1)  Switch Log

FIG 16 Setup .JPG

 

(2)  Clear Battery Data

FIG 17 Clear Battery Data.JPG

 

(3)  Power On State

FIG 18 Power On State.JPG

(4) Indicator Light Mode

FIG 19 Indicator Light Mode.JPG

 

(5) Child lack

Can be deactivated locally by powering on the device or by pressing the button 4 times consecutively)

FIG 20 Child lack.JPG

 

Other functions

1. Shared devices

FIG 21 Shared devices.JPG

 

2. Product linkage

E.g., Linkage with human infrared sensor; when
‘The PIR detects movement the socket switch is turned on.

FIG 22 Product linkage.JPG

 

3. Restore Default
After clicking ‘Uninstall and Clear data adding the device again will clear the data arid restore the default settings.

FIG 23 Restore Default.JPG

 

FAQ

Why does the socket automatically turn Off the power after an appliance is plugged in?

A: This ig because the plugged-in appliance exceeds the rated current Of the socket. triggering the overload protection function. the socket will automatically cut off the power to prevent damage,

What happens when a socket experiences under-voltage or over voltage?

A: When under voltage (voltage below 85V) or over voltage (voltage above 260V) is detected the socket will immediately and automatically cut off the power.

 

FIG 24

Smart Home Device contains WiFi smart device,

Z-Wave device and ZigBee device.give you more choices to create a new smart life.

Wide application on the living room, kitchen, bedroom, bathroom, garage, garden, yard or basement of your home,office,warehouse,chain store…

Make life smarter and more convenient.

 

FIG 25.JPG

 

Read More About This Manual & Download PDF:

Documents / Resources

PDF thumbnailZigbee Smart Plug 16A UK Socket
User Guide · Sf83bef67e1064767974914f8d27ed9dfi, Zigbee Smart Plug 16A UK Socket, Smart Plug 16A UK Socket, 16A UK Socket

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.