tuya Zigbee PIR Motion Sensor
Product overview and features:
Human motion sensors detect the movement of people or animals in the environment by infrared,and combine with other intelligent devices to realize intelligent application scenarios.
Installation method
Take the product out of the package, stick the double-sided adhesive tape in the back center of the product, tear off the protective paper of the adhesive tape, and paste it at any place where it needs to be installed.
Download and install app:
Search the app store for “Smart Life” to download and install.
Access settings
Note: add intelligent gateway before adding this device.
- Install the battery on the device and make sure the mobile phone is connected to the network.
- The first power on will automatically enter the distribution network mode,or press the reset button (the reset button is on the back of the product) with the pin for more than 10 seconds,and the device indicator will flash to enter the distribution network mode After the distribution network is successful, the distribution network indicator will go out.
- Open the app, click the gateway, and add a sub device under the gateway. Make sure that the system automatically searches for the device after the indicator light flashes. After waiting for one minute, the system can automatically add the device.
Product specification
- Product name Human Motion Sensor
- Product model IH012-RT02
- Networking form ZigBee 3.0
- Detection 120′
- Distance <SM
- Power input AAA1.5VX3
- Working temperature -10·c~4s•c
- Product size 6 3 mm*30mm*63mm
Product structure diagram
Packing list
- Human Motion Sensor X 1
- User manual X 1
- Reset pin X 1
- Double-sided adhesive X 1
Working principle
Documents / Resources
 |
tuya Zigbee PIR Motion Sensor [pdf] Instruction Manual Zigbee PIR Motion Sensor, PIR Motion Sensor, Motion Sensor |