Tuya Z2M ZigBee Switch Module
- Please read the manual carefully and use the product correctly. Thank you for purchasing and using this product. Before using the product, please read the manual carefully and use the product correctly.
- The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.
Product description
| Wireless Protocol |
Zigbee 3.0 |
| Input |
AC 85–250V, 50/60Hz |
| Output |
AC 85–250V, 50/60Hz |
| Load Power |
≤ 3500W (AC 220V, 16A max) |
| Working Temperature |
-10°C to 55°C |
| Working Humidity |
0–99% RH |
| Product Size |
41 × 20 × 41 mm |
Installation Method
- Please wire the device according to the marking on the cover.
ON/OFF operating principle:
- The connected appliances work/stop through live wire power on/off.
- The device must be powered by L and N.
- Warning: Sl and S2 can only be connected to two of the wali switches.
- Sl and S2 cannot connect to strong power, such as Zoro. fire line! Wiring, please turn off the AC power supply!
Network Configuration
- Long-press the device “Button” for 3 seconds. and the indicator led flashes rapidly, indicating that the device has entered the network configuration mode.
- Go to the “Add Device” interface on the App Select Gateway Search Device (refer to Zigbee Gateway /APP manual)
- Tips: The Zigbee device must connect to the Zigbee gateway to upload data to the SERVER/APP.
- This product supports the Zigbee route (signal repeater) function.
