TURTLE BEACH TBC-8101-75 Rematch Wireless Controller
PLATFORM COMPATIBILITY:
- NINTENDO SWITCH™
- NINTENDO SWITCH™ LITE
- NINTENDO SWITCH™ – OLED
CERTIFICATION MODEL: 500-253
PACKAGE CONTENTS
- Rematch™ Wireless Controller
- 3.3 ft/1m USB-C cable
- Quick-Start Guide
SETUP
Pairing the Controller
- Turn on your Nintendo Switch’™ device and press any button on the controller.
- If your controller does not automatically connect, it will need to be paired with the device.
- Using the Joy-Con”’ controllers, navigate to Controllers > Change Grip/Order.
- Now, using your controller, press and hold the sync button lat the top of the controller by the charging port) for 3 seconds until it pairs and the player indicator light at the bottom is solid.
Tip: To unpair the controller from the Nintendo Switch™, hold down the sync button (located at the top of the controller) for at least 1 second.
NOTICE: Before using the controller, we recommend fully charging it as it will only ave an hour or two of battery life out of the box.
Re-connecting the Controller
- If the controller is not connecting with the device, but has already been paired,simply go into Controllers > Change Grip/Order.
- When prompted, press L and R on your controller to connect.
Tip: You can also press and hold the “Home” button to wake up the controller and Nintendo Switch’™ device.
Charging the Controller
- When the controller is low on battery, the “function” button’s LED will blink RED every 30 seconds.
- Using the included USB-C cable, connect the controller to one of the USB ports on the Nintendo Switch™ dock.
- While charging, the “function” button’s LED will pulse RED. When the controller is fully charged, the LED will turn WHITE.
Note: To prevent the controller battery from completely draining out, please charge the controller every 3 months even it’s not in use.
- To program, hold the “function” button and press the back button you’d like to map a control to.
- Once the “function” button LED is flashing, press any button on the controller to map that button’s function to the back. The LED will blink quickly 3 times, indicating successful programming.
- To clear a mapped function or disable the back buttons completely, hold down the “function” button and double press any back button.
Any questions?
Please register your product to receive important updates.
www.turtlebeach.com/productregistration
For warranty, visit: www.turtlebeach.com/warranty
Documents / Resources
 |
TURTLE BEACH TBC-8101-75 Rematch Wireless Controller [pdf] User Guide TBC-8101-75, TBC-8101-95, TBC-8101-75 Rematch Wireless Controller, Rematch Wireless Controller, Wireless Controller, Controller |
 |
TURTLE BEACH TBC-8101-75 Rematch Wireless Controller [pdf] User Guide TBC-8101-75, TBC-8101-75 Rematch Wireless Controller, TBC-8101-75, Rematch Wireless Controller, Wireless Controller, Controller |