TF39 Vlog Selfie Screen Monitor
“
Specifications
- Product: VLOG Mobile screen sharing device TF39
- Display Resolution: 480*800
- Supports DP multi-protocol reverse charging for mobile
phones
Product Usage Instructions
1. Notes before Use
Before using the device, follow these important notes:
- Read the instructions carefully for correct operation.
- Avoid exposing the device to extreme weather conditions.
- Avoid collisions with sharp objects to prevent damage.
2. Charging Safety
For safe charging:
- Use DP-1 TYPE-C dedicated connection cable for charging.
- Avoid using incompatible chargers or data cables.
3. Maintenance and Care
Proper maintenance tips:
- Clean the screen with a soft dry cloth, avoiding chemical
detergents. - Store the device in a dry and cool environment to maintain
performance.
4. Functional Description
The product is designed for live broadcasters and selfie
enthusiasts. Key features include:
- Real-time screen projection from the mobile phone to the selfie
screen. - Support for external headphones and live broadcast
microphones. - Supports charging mobile phones via DP multi-protocol reverse
charging.
5. Usage Guidelines
To adjust screen ratios, follow these steps:
- Short press the side button to switch between different screen
ratios.
Using Reminders
Remember these key points before using the device:
- Read instructions carefully for correct operation.
- Avoid extreme weather conditions and collisions with hard
objects.
FAQ (Frequently Asked Questions)
Q: Can I charge my mobile phone using the selfie screen?
A: Yes, the device supports charging mobile phones via DP
multi-protocol reverse charging.
Q: How do I clean the screen of the selfie screen?
A: Use a soft dry cloth to gently wipe the screen. Avoid using
detergents containing chemical ingredients.
“`
USER
MANUAL
VLOG Mobile screen sharing device
TF39
Contents
01Using Reminders …………….. 01 02Accessories List ……………… 02 03Functional Description ……… 02 04Usage Guidelines …………….. 04 05Specifications ……………….. 09 06Contact Us ……………………. 10
01Using Reminders
Notes before use 1. Please read the instructions carefully before use to ensure the correct operation of the device. 2.Do not expose the selfie screen to extreme weather conditions (such as high temperature, low temperature, humidity, etc.) to avoid affecting the performance of the device. 3.Do not collide the selfie screen with sharp or hard objects to avoid scratching the screen or damaging the device.
Charging safety Try to use the DP-1 TYPE-C dedicated connection cable to charge the selfie screen, and avoid using incompatible chargers or data cables.
Maintenance and care 1. Clean the screen: Use a soft dry cloth to gently wipe the screen. Avoid using detergents containing chemical ingredients to avoid damaging the screen surface. 2.Storage environment: Please store the selfie screen in a dry and cool environment. Avoid long-term exposure to high temperature or humidity to avoid affecting product performance.
01
02Accessories List
01Selfie screen ……………………. 1 PCS 03DP TYPE-C dedicated cable….. 1 PCS 05Bluetooth remote control …….. 1 PCS
02Magnetic patch …………….. 2 PCS 04user Manual ………………… 1 PCS
03Functional Description
The product is suitable for live broadcasters and selfie enthusiasts who use the rear camera to watch the real-time screen of the mobile phone through the selfie screen. The machine supports the use of external headphones or live broadcast microphones, and supports DP multi-protocol reverse charging for mobile phones.
1 –Display
The selfie screen is equipped with a 480*800 resolution display and uses advanced screen projection technology to synchronize the screen images of the mobile phone and the selfie screen with zero delay, allowing you to preview and adjust the shooting effect in real time when taking selfies.
02
2 –Side buttons
By pressing the side button, you can easily adjust the screen display ratio to suit different screen display needs.
3 — Audio Interface The product supports Type-C interface headphones or wireless live broadcast microphones, allowing you to enjoy high-quality audio experience during live
4 — Charging port
This interface can not only provide power
for the selfie screen, but also support
charging the mobile phone, achieving
1
uninterrupted power supply.
5 — Data Interface
This interface is designed for audio and video transmission and sharing between the selfie screen and the mobile phone.
6 — Display Light
The red light is the power indicator light. If it
6
5
4
stays on, it means the power is successfully connected.
The green light is the screen projection status light. If it stays on, it means the screen projection operation is successful.
2 3
03
04Usage Guidelines
01Side button usage guide
Short press the side button to switch between the following three screen ratios:
1. The screen image ratio will be precisely adjusted to 1:1, perfectly restoring the original ratio.
2. The horizontal margins of the screen image will be reduced to fit closely to the left and right
edges of the display.
3. The screen image will be stretched to full screen mode to make full use of every inch of the
selfie screen display space.
Short press
1.
2.
3.
Long press the side button to realize the screen mirroring and recovery functions: instantly mirror the screen image, or switch back to normal display state.
Long press
04
02Power on and off guide
Power on:Plug one end of the cable into the data port, and then plug the other end into the Type-C port of the phone.At this time, the device power supply will be used to power the machine and realize the sound and video synchronization functions. Power off:Just disconnect all connections.
Power on
power off 05
03 Installation Guide
Tear off the sticky tape on the back of the magnetic patch and stick it on the surface of the phone or phone case to achieve convenient magnetic connection of the selfie screen.
(Some phones do not require magnetic suction and can be directly connected to the built-in magnetic suction of the phone.)
1
2
3
06
04Live broadcast without sound If one end of the cable is accidentally plugged into the charging port and the other end is normally connected to the Type-C port of the mobile phone, the device will only display the picture and the earphones will be silent. You need to plug the cable into the data port.
07
05Bluetooth remote control usage guide
1.Turn the remote control switch to the on position. The LED light flashes blue to turn on the device; turn the switch to OFF to turn it off.
2. Turn on the Bluetooth of your mobile phone, search for the device name: AB Shutter 3, click pairing and connect.
3. Open the camera interface on your mobile phone, press the shooting button on the remote control to control the shooting.
1
2
3
AB Shutter 3
08
05Specifications
Product model Product material Product quality Product size Screen brightness Viewing angle Support touch Power input Rated power Display interface Headphone interface Reverse charging port Button Red light display Green light display
TF39 ABS+PC 85g 62*102*9MM 400 lumens full viewing angle not supported 5V 2W TYPE-C*1 TYPE-C*1 TYPE-C*1 Touch*1 Power Screen projection successful
09
06Contact us
If you have any questions or need help, please contact our customer support team, we will be happy to serve you. Contact information Emailttq-vip@outlook.com
10
Documents / Resources
 |
TTQ TF39 Vlog Selfie Screen Monitor [pdf] User Manual TF39, TF39 Vlog Selfie Screen Monitor, Vlog Selfie Screen Monitor, Selfie Screen Monitor, Screen Monitor |