TSCINBUNY ZYC0043 Car 4WD Robot Line Follower and Evader
Tscinbuny Robot Car Kit For Arduino Uno Project, Programmable Robotic with Codes, 4WD with Rubber Wheels Obstacle Avoidance Line Tracking Complete Kit
- Precise Black-Line Tracking: Our educational robotic kit offers exceptional black-line tracking capabilities, ensuring that learners can explore the exciting world of robotics with utmost precision. The built-in sensors allow the robot to follow intricate lines effortlessly.
- Obstacle-Avoiding Technology: Safety and creativity go hand in hand with our kit. Thanks to advanced obstacle-avoidance features, this robot intelligently navigates around objects and obstacles, promoting a hassle-free learning experience and ensuring no interruptions during play.
- Easy For Arduino Programming: Our kit is designed for those eager to dive into the world of coding. With Arduino programming, users can gain hands-on experience in writing and executing code, empowering them to customize their robot’s behavior and discover the magic of automation.
- Comprehensive Instructions Manual: We understand the importance of clear guidance for beginners. Our kit includes a comprehensive instruction manual that guides users through the setup, coding, and operation of the robot. It’s your roadmap to becoming a proficient robot builder and programmer.
- Ready-to-Use Codes: For an expedited learning experience, we provide pre-written, customizable codes. Users can experiment with these codes, making it easier to grasp key programming concepts. This feature is perfect for both beginners and more experienced learners who wish to tweak and expand their robot’s capabilities.
Package includes
- 1 X ZY-Uno main control board
- 1 X Uno R3 V5.0 expansion board
- 1 X Type C USB cable for Uno R3 main control board
- 1 X Four-channel tracking module
- 2 X Infrared obstacle avoidance module
- 1 X L298N motor driver module
- 1 X Servo/SG90° steering gear
- 1 X Ultrasonic module
- 8 X Motor fixing bracket
- 4 X Speed measuring code disk
- 1 X SG90 bracket
- 1 X Ultrasonic fixed bracket suite
- 4 X M3*30 copper column
- 6 X M3*15 copper column
- 6 X M3*40 copper column
- 14 X M3*8 round head screw
- 8 X M3*30 round head screw
- 18 X M3 nut
- 26 X M3*8 flat head screw
- 12 X 20cm male to male Dupont wire
- 38 X 20cm female to female Dupont wire
- 4 X Robot car wheels
- 4 X Robot gear motors with black and red wire
- 1 X 2 slots 18650 battery storage case with ON/OFF switch
- 2 X Acrylic chassis
Purchase Note
The kit is without batteries, and the battery is sold separately, and the battery type is 18650 3.7v, with no capacity limit, there is a link and QR code for downloading instructions on the manual.
Battery Specifications
- Battery Type: “Button Top” or “Flat Top” batteries
- Model: 18650
- Voltage: 3.7v
- Capacity: No limit
To power this kit, customers must purchase two pieces of 18650 batteries separately from other ways.
Download Instructions
Select “ZYC0043-EN”
Scan the QR code and go
to our Dropbox to select and
download the desired tutorial.
Y robot@zhiyi.ltd
If you have more questions,
please feel free to contact us via email!
Product description of four-way tracing and obstacle avoidance car V2.0
ZYC0043
product description:
This product is a smart car developed based on UNO R3, which can realize four-way tracking function, ultrasonic obstacle avoidance function, and car following function. There are mainly four modules, including LM339 four-channel infrared signal detection module, main control module, UNO expansion board module, motor drive module, ultrasonic sensor module, and LM393 infrared detection module. The smart car adopts a welding-free installation design. The components are fixed by copper pillars and screws. The circuit connection between each module is connected by DuPont wire, which is simple and convenient.
1. The main control board adopts CH340 UNO R3 development board.
2. The motor drive module uses a typical L298N module to drive a DC motor.
3. The infrared signal detection module uses four infrared light pairs to detect the black line and realize the tracking function.
4. The ultrasonic sensor module uses the HC-SR04 module, through which the distance is measured, so as to realize the ultrasonic obstacle avoidance function.
5. The combination of ultrasonic and two infrared detection modules realizes the car following function
Product parameters
Power supply: 2 removable 3.7v lithium batteries
Input: LM339 infrared sensor, HC-SR04 ultrasonic module, LM393 infrared sensor
Motor: DC geared motor
Motor drive: L298N module
Microprocessor: Arduino UNO R3 controller
Product bill of materials:
1. CH340G UNO R3 development board *1
2.UNO expansion board*1
3.L298N driver board *1
4.HC-SR04 Ultrasonic Module *1
5. Four-way tracking module *1
6. Infrared detection module*2
7. DC motor *4
8. Ultrasonic bracket *1
9. Servo*1
10. Servo bracket*1
11.Rubber wheel *4
12. Speed measuring code wheel *4
13.T-type geared motor fixing bracket *8
14.18650 battery box *1
15.M3*30 double pass copper pillar *10
16.M3*15 double pass copper pillar *6
17.M3 nut *16
18.M3*8 flat head screw *36
19.M3*30 round head screw *8
20.M2*12 round head screw *5
21.M2 nut *5
22.M1.6*8 round head screw *6
23.M1.6 nut *6
24.M2*8 self-tapping screw*3
25.20cm female to female DuPont wire*38
26.20cm male to male Dupont wire *12
27. Acrylic 4-wheel car bottom plate *2
Documents / Resources
 |
TSCINNUNY ZYC0043 Car 4WD Robot Line Follower and Evader [pdf] Instruction Manual ZYC0043-EN, 1-4, ZYC0043 Car 4WD Robot Line Follower and Evader, ZYC0043, Car 4WD Robot Line Follower and Evader, Line Follower and Evader, Follower and Evader, and Evader |