TRIBEWOOD Rustic Solid Wood Dining Table Installation Guide

TRIBEWOOD Rustic Solid Wood Dining Table

Assembly Instructions

IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.

Thank you for choosing our products. Please read the instructions carefully before installation, and keep this manual properly.

Tips and Tricks

1. Do not attempt to move this furniture without first removing all equipment.
2. Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over onto the child.
3. Please contact us using the details shown for further advice.

WARNING: If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

What’s in the Box

Installation Steps

1. Use hardware (2, 4, 5, 6) to assemble the legs (C) and seat frame (B) together. (First tighten the screws to 75%.)
2. Use hardware (3, 4, 5, 6) to assemble the seat frame (B) and chair back (A) together. (First tighten the screws to 75%.)
3. Use hardware (1, 4, 5, 6) to fix the seat frame (B) to the chair back (A). (First tighten the screws to 75%.)

Final Assembly

Flip the chairs over so all four legs of each chair rest on the same level surface, then securely tighten all hardware.