HPC-17-wc4 Hybrid Pro Modular Counter 17 with Wireless Charging
“
Product Information
Specifications
- Product Name: Hybrid Pro Modular Counter 17 w/Wireless
Charging - Model Number: HPC-17-wc4
- Dimensions (Assembled): 43.31w x 39.37h x 23.23d / 1100mm(w) x
1000mm(h) x 590(d) - Approximate Weight: 68 lbs / 31 kg
- Shipping Dimensions: OCH2 – 52L x 29H x 15D / 1448mm(l) x
1449mm(h) x 838mm(d) - Approximate Shipping Weight: 103lbs / 47 kg
- Graphic Material: Dye-sublimation SEG push-fit fabric
Product Usage Instructions
Assembly:
- Remove the top panel from the case and lay it upside down on
the floor. - Lock each vertical side to the top using the provided hex
key. - Stand the counter upright.
- Add the SEG Pressfit graphic to each end as shown.
How to Apply & Remove Graphics:
Installation and removal of SEG graphics:
- Push the SEG bead into each corner of the frame with your
thumb. - Push the SEG bead into the middle of the run and work your way
around the perimeter. - To remove, use the pull tab located on the graphic and gently
pull it from the frame.
Graphics Storage & Care:
Fold graphics with the graphic facing inward and store in a zip
lock bag. Spot clean with a damp cloth or use a commercial size
washing machine for washing. Line dry flat.
FAQ
Q: Can the counter be disassembled for storage?
A: Yes, the counter can be disassembled into three pieces and
packed into the OCH2 portable case for easy storage and
transportation.
Q: How should I clean the graphics?
A: Graphics should be spot cleaned with a damp white cloth. If
washing is necessary, use a front-loading washing machine on a
gentle cycle with cool water. Line dry flat.
“`
Hybrid Pro Modular Counter 17 w/Wireless Charging
HPC-17-wc4
The Hybrid ProTM Modular Counter 17 is a bright and clever counter! It features backlit SEG graphics on both sides, making your brand and message glow! With addition of 4 wireless charging pads your counter is even more flexible. The counter has a wood top, light box frames with SEG graphics on both the left and right sides and it packs down easy to ship quick!
features and benefits:
– Modern illuminated counter – White wood top panel – Laminate overlays the extrusion frame and matches counter top color – Light box slides make graphics glow – Three piece assembly for quick set up – Packs into OCH2 portable case
dimensions:
Hardware
Assembled unit:
43.31″w x 39.37″h x 23.23″d 1100mm(w) x 1000mm(h) x 590(d)
Approximate Weight: 68 lbs / 31 kg
Shipping
Packing case(s): 1 OCH2
Shipping dimensions: OCH2: (52″L x 29″H x 15″D) 1448mm(l) x 1449mm(h) x 838mm(d)
Approximate shipping weight: 103lbs / 47 kg
Graphics Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/ downloads/download-graphic-templates or click here
additional information:
Graphic material: Dye-sublimation SEG push-fit fabric
Panel Color:
We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications
1/30/2025
This product may include the following materials for recycle: aluminum, select wood, fabric, cardboard, paper, steel, and plastics.
1 person assembly recommended:
Included In Your Kit
x1 COUNTER TOP
x1 LEG
x1 LEG
7PC ( SILVER ) HEX KEY SET
Hybrid Pro Modular Counter 17 w/Wireless Charging
1. Remove the top panel from the case and lay it upside down on the floor, then lock each vertical side to the top as shown below using the provided hexkey. Be sure to match the colored dots for correct positions.
Hybrid Pro Modular Counter 17 w/Wireless Charging
1. Stand counter upright 2. Add the SEG Pressfit graphic to each end as shown.
PRESS CORNERS IN
THEN PRESS ALONG THE PERIMETER EDGE
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy! Installation: Push the SEG bead into each corner of the frame (1- 4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves. Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.
Documents / Resources
 |
TradeShowPlus HPC-17-wc4 Hybrid Pro Modular Counter 17 with Wireless Charging [pdf] Owner's Manual HPC-17-wc4, HPC-17, HPC-17-wc4 Hybrid Pro Modular Counter 17 with Wireless Charging, HPC-17-wc4, Hybrid Pro Modular Counter 17 with Wireless Charging, Counter 17 with Wireless Charging, with Wireless Charging, Wireless Charging |