Traceable 5660 Thermohygrometer with Clock 

DISPLAY DETAILS

CLEARING INDIVIDUAL READINGS

1. Press select button until desired reading to be cleared is flashing.
2. Press and hold clear/revert button for 3 seconds to clear reading.

CLEARING ALL MEMORY READINGS

1. Press and hold clear/revert button for 3 seconds to clear all memory readings.

INITIAL SETUP

1. Remove battery cover and insert batteries
   
2. Once batteries are installed, press O button to select setting.
   
3. The first setting, Hours, will flash on display
   
4. Press “ ” and “ ” buttons to adjust setting.
   
5. Once finished, press Ο button to save setting and proceed to Minutes, 12/24 Hour, etc.
   
6. Complete all settings to configure device:
   • Hours
   • Minutes
   • 12 or 24 hour format clock
   • Temperature units
7. Replace battery cover.
   

Customer Support

1.888.610.7664
www.calcert.com
sales@calcert.com

Documents / Resources

Traceable 5660 Thermohygrometer with Clock [pdf] User Guide 5660 Thermohygrometer with Clock, 5660, Thermohygrometer with Clock, Thermohygrometer, Clock

References

• User Manual