Arayüz Modülü Kılavuzları ve Kullanım Rehberleri

tecnint PM-R125 Rfid Lf Interface Module User Manual

28 Nisan 2026

tecnint PM-R125 Rfid Lf Interface Module Specifications Electrical characteristics  Model PM-R125-TTL PM-R125-232 Power supply 5VDC ± 0.25V Power consumption < 1W RF frequency LF RFID BAND 125kHz ± 2kHz Antenna External, inductive Antenna connection Molex 51191-0300 Data port Serial, TTL…

Brand: tecnint

Honeywell EIM4010 Equipment Interface Module Installation Guide

27 Nisan 2026

Honeywell EIM4010 Equipment Interface Module Overview The Honeywell EIM4010 Equipment Interface Module is used to connect HVAC equipment with compatible control systems. It acts as a communication bridge between thermostats and heating/cooling equipment, enabling better system control and monitoring. Specifications…

Marka: Honeywell

Honeywell NION-232B Network Input Output Node interface module Installation Guide

14 Nisan 2026

NION-232-U400 Product Installation Document This document covers the procedures and specifications for installing the above listed unit and when appropriate, information regarding configuration on the monitored device. For more detailed configuration and operation information, refer to Network Installation Manual, Echelon…

Marka: Honeywell

xtralis LT-SEN-IM Li-ION Tamer off Gas Sensor and Interface Module User Manual

28 Mart 2026

xtralis LT-SEN-IM Li-ION Tamer off Gas Sensor and Interface Module General Scope This document provides specification details on the Li-ion Tamer Sensor MOS designed to assist users in the installation, operation, and maintenance of the system. Important Notes!  This Li-ion…

Marka: xtralis

Honeywell Home EIM4010 Equipment Interface Module Installation Guide

27 Mart 2026

EIM4010 Equipment Interface Module Installer Guide Compatibility EIM4010 Equipment Interface Module is compatible with Elite PRO Red link 3.0 thermostats and T10+ thermostats. Follow the thermostat installation instructions to wire to 24 VAC power and start setup. Mounting EIM4010 Use…

Marka: Honeywell Home

FORTIN EVO-ALL 82101 Universal All in One Data Bypass and Interface Module Instruction Manual

15 Mart 2026

FORTIN EVO-ALL 82101 Universal All-in-One Data Bypass and Interface Module Product Specifications Compatible with Mitsubishi RVR Outlander Sport USA vehicles from 2011-2026 Firmware Version: 86.[16] Program bypass option available Features: Immobilizer bypass, Lock, Unlock, Arm, Disarm, Trunk (open), Tachometer, Door…

Marka: FORTIN

PDi PD295-002 Set-top Box Interface Module Instruction Manual

13 Mart 2026

PDi PD295-002 Set-top Box Interface Module Cautions and warnings MODEL NUMBER: PD295-002 This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions…

Marka: PDi

i safe MOBILE MIM1xA01 Arayüz Modülü Kullanım Kılavuzu

19 Aralık 2025

IS-IM1x.1 ARAYÜZ MODÜLÜ IS940.x/IS945.x İÇİN IS-DS940.1'E MONTE EDİLMİŞTİR KULLANIM KILAVUZU MIM1xA01 Arayüz Modülü IS-IM1x.1 | MODEL MIM1xA01 Belge No. 1077MM01REV00 Sürüm: 2025-11-13 i.safe MOBILE GmbH i_Park Tauberfranken 10 97922 Lauda-Koenigshofen Almanya Tel. +49 9343 60148-0 info@isafe-mobile.com www.isafe-mobile.com (c) 2025 i.safe…

Marka: i safe MOBILE

seca 452 TRU Alpha Arayüz Modülü Kullanım Kılavuzu

18 Aralık 2025

seca 452 TRU Alpha Interface Module Configuring the Wi-Fi Connection Make sure that there is no LAN cable connected to the device. Make sure that TCP port 22020 and 443 is enabled for incoming and outgoing connections within your firewall.…

Marka: seca

FORTIN EVO-ALL Elektronik Sistemler Arayüz Modülü Kurulum Kılavuzu

19 Kasım 2025

REV.: 20250916 Kılavuz # 126041 EVO-ALL Elektronik Sistem Arayüz Modülü BAĞIMSIZ KURULUM EKİ - ÖNERİLEN KABLOLAMA YAPILANDIRMASI SADECE OTOMATİK ŞANZIMANLI ARAÇLARLA UYUMLUDUR. ARAÇ FORD YILLARI 12” ekran 2022-2024 Bu şemada desteklenen araç fonksiyonları (varsa çalışır) İmmobilizer…

Marka: FORTIN