Phanteks XT View Orta Boy Oyun Kasası Kullanım Kılavuzu

1. Giriş

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Temel Özellikler:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Paket İçeriği

Paketin tüm bileşenlerinin mevcut olduğunu doğrulayın:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Zip bağları (30x)
  • MB/SSD Screws (30x)
  • Başparmak Vidaları (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Kurulum ve Kurulum

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View şasi.

3.1. Şasinin Hazırlanması

1. Paketi aç: Şasiyi ambalajından dikkatlice çıkarın.
2. Panelleri Kaldır: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Resim 3.1: İç mekan view of the XT View chassis, ready for component installation.

3.2. Anakart Kurulumu

1. Ara Parçaları Takın: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Place Motherboard: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Güvenli Anakart: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Güç Kaynağı Ünitesi (PSU) Kurulumu

1. Pozisyon PSU: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. Güvenli Güç Kaynağı: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Depolama Sürücüsü Kurulumu

The chassis supports 3.5" HDDs and 2.5" SSDs.

• 3.5 inç HDD: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5" SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Genişletme Kartı (GPU) Kurulumu

1. Yuva Kapaklarını Çıkarın: Kasanın arka tarafındaki gerekli genleşme yuvası kapaklarını çıkarın.
2. Kartı Takın: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Güvenli Kart: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Resim 3.2: Arka iç mekan view highlighting expansion slots and fan mounting points.

3.6. Fan ve Radyatör Montajı

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Kablo Yönetimi

Anakart tepsisinin arkasındaki kablo yönlendirme kanallarını ve sabitleme noktalarını kullanarak kabloları düzenleyin. Bu, hava akışını iyileştirir ve estetiği artırır.

Resim 3.3: Arka view illustrating cable management space.

3.8. Ön G/Ç Bağlantıları

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• USB 3.0 başlığı
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Kullanım Talimatları

4.1. Güç Açma/Kapatma

Basın Güç Düğmesi located on the top front panel to turn the system on or off.

4.2. Ön Panel Bağlantıları

Ön giriş/çıkış paneli aşağıdakilere kolay erişim sağlar:

• 1x USB 3.0 portu
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Bakım

5.1. Toz Filtrelerinin Temizlenmesi

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Filtreleri Kaldır: Gently slide out or unclip the dust filters.
2. Temiz: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. yeniden yükleyin: Place the clean, dry filters back into their positions.

5.2. Genel Temizlik

For external surfaces, use a soft, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Sorun Giderme

Bu bölümde karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.

6.1. Sistem Açılmıyor

• Güç Bağlantıları: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Motherboard Connections: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Anakart Senkronizasyonu: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Düğme İşlevselliği: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Bağlantılar: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• obstrüksiyonlar: Check for any cables or objects obstructing fan blades.
• Toz: Clean any dust buildup on fan blades.

7. Özellikler

8. Destek ve Garanti

For additional information, technical support, or warranty inquiries, please visit the official Phanteks webalan:

www.phanteks.com

Refer to the Phanteks website for the most current warranty terms and conditions applicable to your region.