Ulecoce U18R-B

Ulecoce Keyless Entry Door Lock Deadbolt with Handle Set User Manual

Model: U18R-B

giriiş

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ulecoce Keyless Entry Door Lock Deadbolt with Handle Set. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Ürün Özellikleri

Diagram showing multiple unlocking methods for the Ulecoce smart lock.

Figure 1: Multiple Convenient Unlocking Methods. This image illustrates the various ways to unlock the Ulecoce smart lock, including keypad code, one-touch locking, one-time codes, anti-peeping password, physical key, and door knob.

Paket İçeriği

ÖğeMiktar
Deadbolt Front Lock1
Deadbolt Rear Lock1
Door Knob Front1
Door Knob Rear1
Kilit Mandalı2
Anahtar2
Delik Açma Şeması1
Installation Tutorial Card1
Talimatlar1
Mounting Plate Screws 1.46in/37mm (A)2
Mounting Plate Screws 1.19in/30mm (B)3
Mounting Plate Screws 0.24in/6mm (C)2
Fixed Leg (D)2
Silicone Ring (E)1
Yedek parça4

Özellikler

Diagram showing dimensions of the Ulecoce U18 Smart Door Lock Set.

Figure 2: U18 Smart Door Lock Set Core Advantages and Dimensions. This image provides detailed measurements of the lock components and highlights key features like one-touch lock, pin password, auto lock, door knob, 100 user codes, low battery alert, mechanical key, and IP54 waterproof rating.

Kurulum Kılavuzu

The Ulecoce Keyless Entry Door Lock is designed for easy installation without the need for extra drilling. A screwdriver is the only tool required.

Kapı Uyumluluk Kontrolü

Kapınızın aşağıdaki özelliklere uygun olduğundan emin olun:

Diagram illustrating easy installation without drilling and door compatibility requirements.

Figure 3: Easy Installation without Drilling. This image shows the required latch hole and door compatibility (single cylinder vs. mortise/integrated) and provides key measurements for backset and hole diameter.

Adım Adım Kurulum

  1. Kapıyı hazırlayın: Ensure the door is clean and the existing holes are clear.
  2. Mandalı takın: Kilidi kapı kenarına yerleştirin ve vidalarla sabitleyin.
  3. Install the exterior keypad assembly: Route the cable through the door and align the keypad with the latch.
  4. Install the interior mounting plate: Secure the mounting plate to the exterior assembly using screws.
  5. Connect the cable and install the interior assembly: Connect the cable from the exterior unit to the interior unit. Secure the interior unit to the mounting plate.
  6. Install the door knob: Attach the handle set according to the provided diagram.
  7. Pilleri takın: İç ünitedeki pil kapağını açın ve 4 adet AA pil (dahil değildir) takın.
  8. Kilidi test edin: Verify that the deadbolt extends and retracts smoothly.
Image of the Ulecoce Keyless Entry Door Lock installed on a door.

Figure 4: Installed Ulecoce Keyless Entry Door Lock. This image displays the smart lock and handle set mounted on a white door, showcasinestetik bütünleşmesi.

Kurulum ve Programlama

Before initial use, you will need to set up administrator codes and user codes.

İlk Kurulum

  1. Set Administrator Code: Follow the instructions on the Installation Tutorial Card to set your primary administrator code. This code is essential for managing other user codes.
  2. Kullanıcı Kodlarını Ekle: You can program up to 97 user codes. These can be permanent, one-time, or scheduled codes.
Image of a person using a smartphone to send a one-time PIN code for the smart lock.

Figure 5: One-Time PIN Code Functionality. This image depicts a user sending a temporary access code via smartphone, highlighting the convenience of managing access remotely.

Anti-Peeping Password Feature

To enhance security, you can enter random digits before or after your actual passcode. The lock will still recognize the correct sequence within the longer string of numbers.

Diagram showing the anti-peep tactile keypad feature, allowing extra digits before and after the correct code.

Figure 6: Anti-Peep Tactile Keypad. This image illustrates how the anti-peeping feature works, allowing users to input garbled numbers before and after the correct password to prevent code exposure.

Kullanım Talimatları

Kapıyı Açmak

Kapıyı Kilitlemek

Bakım

Diagram showing the internal components of the Ulecoce smart lock, including battery compartment and circuit boards.

Figure 7: U18 Zinc Alloy Lock Body and Internal Components. This image provides an exploded view of the lock, highlighting its robust zinc alloy construction and internal electronics, including the battery compartment.

Sorun giderme

SorunOlası NedenÇözüm
Kilit, tuş takımı girişine yanıt vermiyor.Low batteries; incorrect code entered; keypad malfunction.Replace batteries; re-enter code carefully; contact support if issue persists.
Sürgü tam olarak açılıp/kapanmıyor.Misalignment during installation; obstruction in door frame; low batteries.Check alignment of lock and strike plate; clear any obstructions; replace batteries.
Otomatik kilitleme özelliği çalışmıyor.Feature disabled; incorrect time setting; door sensor issue.Ensure auto-lock is enabled and set correctly in programming; check door closure.
Screws loosen after use.Normal wear and tear; insufficient tightening during installation.Periodically re-tighten all mounting screws.

Garanti ve Destek

Ulecoce is committed to providing peace of mind. We offer a 3 yıl ürün garantisi Ve ömür boyu satış sonrası hizmet.

If you have any questions or concerns, please feel free to send us an email. Our customer support team is ready to assist you at any time, providing 24/7 email support and prompt responses to resolve your needs.

Destek için lütfen şu adresi ziyaret edin: Ulecoce Store on Amazon or contact customer service via email (details typically found on product packaging or official webalan).

İlgili Belgeler - U18R-B

Önview Ulecoce Keyless Entry Door Lock Quick Set Up Guide
Concise guide for setting up your Ulecoce keyless entry door lock, covering administrator password management, user code management, system settings, and factory reset.
Önview Ulecoce Fingerprint Keypad Deadbolt Quick Set Up Guide
Concise guide for setting up your Ulecoce Fingerprint Keypad Deadbolt, covering administrator password management, user code management, system settings, and factory reset.
Önview Ulecoce U68 Keypad Deadbolt Installation Manual
Comprehensive installation and programming guide for the Ulecoce U68 Keypad Deadbolt, including step-by-step instructions, troubleshooting, and safety information.
Önview Ulecoce U18 Akıllı Kilit Kurulum ve Programlama Kılavuzu
Bu kılavuz, Ulecoce U18 akıllı kapı kilidinin kurulumu, programlanması ve sorun giderme işlemleri için ayrıntılı talimatlar sunmaktadır. Parça tanımlaması, tuş takımı sürgüleri ve kapı kolları için adım adım kurulum kılavuzları, kullanıcı kodu yönetimi, sistem ayarları ve güvenlik önlemlerini kapsamaktadır.
Önview Ulecoce U68 Keyless Entry Door Lock Installation Manual & User Guide
Comprehensive installation manual and user guide for the Ulecoce U68 smart door lock. Learn how to install, program, and use your electronic keypad deadbolt with fingerprint, WiFi, and app control.
Önview Ulecoce U68 Keypad Deadbolt Installation Manual
Comprehensive installation manual for the Ulecoce U68 Keypad Deadbolt, covering door preparation, installation steps, programming, usage, and troubleshooting.