DrayTek AP906

DrayTek VigorAP 906 WiFi 6 AX3000 Erişim Noktası Kullanım Kılavuzu

Model: AP906

1. Giriş

The DrayTek VigorAP 906 is a powerful Wi-Fi 6 AX3000 solution designed for both home and business networks, particularly suited for high-density environments where numerous clients require wireless connectivity. This access point enhances wireless signal coverage, eliminating dead zones and improving Wi-Fi connection quality. It offers data connection speeds up to 2400 Mbps on the 5 GHz band and up to 574 Mbps on the 2.4 GHz band. The VigorAP 906's compatibility with various DrayTek AP management options helps reduce network deployment costs. Options include VigorACS, VigorConnect, router-based AP management, and AP-based AP management. Standard standalone mode is also supported for flexible installations, and 5 Gigabit Ethernet ports allow for connecting multiple wired devices.

2. Temel Özellikler

3. Kurulum Kılavuzu

3.1 Paket İçeriği

Başlamadan önce pakette tüm öğelerin mevcut olduğundan emin olun:

3.2 Fiziksel Aşırıview

DrayTek VigorAP 906 back panel with numbered ports and buttons

Figure 1: VigorAP 906 Rear Panel Layout

  • 1. Anten: 2x External Dipole Antennas for Wi-Fi signal transmission.
  • 2. LED Göstergesi: Status lights for power, Wi-Fi, and LAN activity.
  • 3. WLAN/WPS Button: Press to enable/disable WLAN or initiate WPS pairing.
  • 4. Power On/Off Switch: Cihazın gücünü açıp kapatır.
  • 5. Güç Girişi: Connect the included power adapter here if not using PoE.
  • 6. LAN A: 4x GbE Ports: Gigabit Ethernet ports for connecting wired devices.
  • 7. LAN B: 1x GbE (PoE) Port: Gigabit Ethernet port that supports Power over Ethernet (PoE+) for power and data.
  • 8. Factory Reset Button: Fabrika varsayılan ayarlarına geri döndürmek için basılı tutun.

3.3 İlk Bağlantı

  1. Açma:
    • Güç Adaptörünü Kullanma: Connect the power adapter to the "Power Input" (5) on the VigorAP 906 and plug it into a power outlet.
    • Ethernet Üzerinden Güç (PoE) Kullanımı: Connect an Ethernet cable from a PoE-enabled switch or injector to the "LAN B" (7) port on the VigorAP 906. This port will provide both power and data.
  2. Ağ bağlantısı: Connect an Ethernet cable from your router or network switch to any of the "LAN A" (6) or "LAN B" (7) ports on the VigorAP 906.
  3. Erişim Web Arayüz:
    • Ensure your computer is connected to the same network as the VigorAP 906.
    • Bir tane aç web browser and enter the default IP address (usually 192.168.1.1 or refer to the Quick Start Guide for your specific model).
    • Enter the default username and password (typically "admin" for both, but check the device label or guide).
  4. Başlangıç ​​konfigürasyonu: Follow the on-screen wizard to set up basic Wi-Fi settings (SSID, password) and change the default administrator password for security.

4. Kullanım Talimatları

4.1 Wi-Fi Ağ Yapılandırması

The VigorAP 906 supports dual-band Wi-Fi 6 (802.11ax) for optimal performance.

4.2 Wired Device Connectivity

The VigorAP 906 features 5 Gigabit Ethernet ports (4x LAN A, 1x LAN B) for connecting wired devices.

5. Bakım

6. Sorun Giderme

SorunOlası NedenÇözüm
No Power LED / Device not turning onPower adapter not connected or faulty; PoE not active or faulty cable.Check power adapter connection and outlet. If using PoE, ensure the switch/injector is providing power and the Ethernet cable is functional.
Wi-Fi ağına bağlanılamıyorIncorrect Wi-Fi password; SSID hidden; Wi-Fi disabled on AP.Verify Wi-Fi password. Check AP settings via web interface to ensure Wi-Fi is enabled and SSID is broadcasting. Try pressing the WLAN/WPS button.
Yavaş Wi-Fi hızlarıInterference from other devices; too many connected clients; outdated firmware.Change Wi-Fi channel in settings. Limit number of connected devices if possible. Update firmware to the latest version. Ensure optimal placement of the AP.
Erişilemiyor web arayüzYanlış IP adresi; ağ bağlantı sorunu; güvenlik duvarı erişimi engelliyor.Ensure your computer is on the same subnet as the AP. Try pinging the AP's IP address. Temporarily disable firewall on your computer. If all else fails, perform a factory reset (see Physical Overview).

7. Özellikler

ÖzellikDetay
MarkaDrayTek
Model NumarasıAP906
Kablosuz İletişim Standardı802.11ax (Wi-Fi 6)
Veri Aktarım Hızı3000 Mbps'ye kadar (birleşik)
Desteklenen Frekans Bantları2.4 GHz, 5 GHz
Özel ÖzelliklerPower over Ethernet (PoE), MU-MIMO, WPA3, Access Point Mode
Uyumlu CihazlarSmartphones, tablets, laptops, computers, Smart TVs, gaming consoles, printers, NAS storage, security cameras
Ürün Ağırlığı680 Gram

8. Garanti ve Destek

For warranty information and technical support, please refer to the documentation included with your product or visit the official DrayTek webSite. Satın alma fişinizi, garanti talepleriniz için satın alma belgeniz olarak saklayın.

DrayTek Resmi Webalan: www.draytek.com